Abstract
Electrodeposited cobalt hardened gold is widely used for electronic applications. The aim of this study was to investigate and optimize the performances of the plating electrolyte (cathodic efficiency and deposition rate) and the composition of the Au–Co coating. A four variable Doehlert experimental design was applied to this optimization and validation was carried out by means of statistical analysis. In a second step, the ‘optimal’ Au–Co electrodeposit was examined by spectroscopy techniques (GDOES, XPS).
Similar content being viewed by others
References
F.H. Reid and W. Goldie (eds.), Gold Plating Technology (Electrochemical Publications, Ayr 1974).
M. Antler, Plating 60 (1973) 468.
Y. Okinaka and M. Hoshino, Gold Bull. 31 (1998) 3.
V.A. Zabludovskii, A.V. Krapivnoi, V.I. Kaptanovskii and N.A. Kostin, Elektrokhimiya 25 (1989) 1258.
S.J. Hemsley and R.V. Green, Trans. Int. Metal Finish. 69 (1991) 149.
R.M. Krishnan, S. Sriveeraraghavan and S.R. Natarajan, Metal Finish. 86 (1988) 56.
H.U. Galgoon, Feingerätetechnik 38 (1989) 353.
H. L. Cohen, K.W. West and M. Antler, J. Electrochem. Soc. 124 (1977) 342.
K. Lin, R. Weil and K. Desai, J. Electrochem. Soc. 133 (1986) 690.
J.A. Lochet, Proc. AESF. Annu. Techn. Conf. 77th Vol. 2. (1990) p.983.
S.T. Rao and R. Weil, Trans. Int. Metal Finish. 57 (1979) 97.
L. Sjögren, B. Asthner, L.G. Liljestrand and L.B. Revay, Plat. Surf. Finish. 73 (1986) 70.
Y.G. Li, W. Chrzanowski and A. Lasia, J. Appl. Electrochem. 26 (1996) 385.
Y.G. Li and A. Lasia, J. Appl. Electrochem. 26 (1996) 853.
Y.G. Li and A. Lasia, J. Appl. Electrochem. 27 (1997) 643.
A. Blair and D. Becker, AES Sur/fin'82, Annu. Techn. Conf. 70th (1983).
R.L. Cohen, F.B. Koch, L.N. Schoenberg and K.W. West, J. Electrochem. Soc. 126 (1979) 1608.
J.H. Thomas III, S.P. Sharma, J. Electrochem. Soc. 126 (1979) 445.
H. Leidheiser Jr., A. Vertes, M.L. Varsanyi and I. Czako-Nagy, J. Electrochem. Soc. 126 (1979) 391.
R. De Donker and J. Vanhumbeek, Trans. Int. Metal. Finish. 62 (1985) 59.
P.Bindra, D. Light, P. Freudenthal and D. Smith, J. Electrochem. Soc. 136 (1989) 3616.
N.N. Balashova, T.A. Smirnova, N.A. Smagunova and A.K. Yudina, Zh. Prikl. Khim. 50 (1977) 2698.
H.R. Khan, M. Baugärtner and Ch. J. Raub, In Proceedings of the Symposium on Electrodeposition Technology: Theory and Practice (Electrochemical Society, Pennington, NY, 1987) p. 165.
T.E. Dinan and H.Y. Cheh, J. Electrochem. Soc. 139 (1992) 410.
H.A. Reinheimer, J. Electrochem. Soc. 121 (1974) 490.
F.B. Koch, Y. Okinaka, C. Wolowodiuk and D.R. Blessington, Plat. Surf. Finishing 67 (1980) 50.
F.B. Koch, Y. Okinaka, C. Wolowodiuk and D.R. Blessington, Plat. Surf. Finishing 67 (1980) 43.
Y. Okinaka and S. Nakahara, J. Electrochem. Soc. 123 (1976) 1284.
Ch.J. Raub, A. Knödler and J. Lendvay, Plat. Surf. Finish. 63 (1976) 35
H.Angerer and N. Ibl, J. Applied Electrochem. 9 (1979) 219.
A. Knödler, Metalloberfläche Angwandte Elecktrochemie 28 (1974) 465.
Y. Okinaka, F.B. Koch, C. Wolowodiuk and D.R. Blessington, J. Electrochem. Soc. 125 (1978) 1745.
R.V. Green and T. Jones, Trans. Int. Metal Finish. 75 (1997) 162.
T.A. Davies and P. Watson, Plating 60 (1973) 1138
D.L. Malm and M.J. Vasile, J. Electrochem. Soc. 120 (1973) 1484.
D. H. Doehlert, Appl. Statist. 19 (1970) 231.
D. Mathieu, J. Nony and R. Phan Tann-Luu, ‘NEMPOD-W software’ (LPRAI, Marseille, 2002).
D. Mathieu and R. Phan Tann-Luu, In Plans d'Expériences: Application à l'entreprise (Technip, Paris, 1995).
D. C. Montgomery, In Design and Analysis of Experiments (Wiley, New York, 1991).
J. Goupy, In Plans d'Expériences Pour Surfaces de Réponse (Dunod, Paris, 1999).
A.I. Khuri and J.A. Cornell, In Response Surfaces: Design and Analyses (M. Dekker, New York, 1996).
H.J. Leary, Jr., D.S. Campbell, J.S. Slattery and R.J. Sargent, In ESCA Surface Analysis of Plasma Exposed Silicon Nitride and Photorsist Polymer Films (IBM General Technology Division editor, Essex).
R. Erre, R. Benoit, F. Beguin and M. Inagaki, International Symposium on Carbon 2 (1990) 6PA 16, 806.
P. Sundberg, R. Larsson and B. Folkesson, Electron Spectrosc. Rel. Phenom. 46 (1988) 19.
V.B. Wiertz and P. Bertrand, In Identification of the n-containing Functionalities Introduced at the Surface of Ammonia Plasma Treated Carbon Fibres by Combined TOF SIMS and XPS, Unitéde Physico-Chimie et de Physique des Matériaux, Univ. Louvain 1348 Editor, Louvain.
N.M.D. Brown, J.A. Hewitt and B.J. Meenan, Surf. Interface. Analy. 18 (1992) 187.
Q.T. Le, M. Chtaib, J.J. Pireaux and R. Caudano, Le Vide, les Couches Minces, Supplément 258 (1991) 86.
C.D. Wagner, W.M. Riggs, L.E. Davis and J.F. Moulder, In Handbook of XPS (Perking-Elmer Corp., Physical Electronics Division Editor).
C. Jones and E. Samman, Carbon 28 (1990) 509.
K. Merritt, R.S. Wortman, M. Millard and S.A. Brown, Biomat., Med. Dev., Art. Org. 11 (1983) 115.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Chalumeau, L., Wery, M., Ayedi, H. et al. Application of a Doehlert experimental design to the optimization of an Au–Co plating electrolyte. Journal of Applied Electrochemistry 34, 1177–1184 (2004). https://doi.org/10.1007/s10800-004-1703-3
Issue Date:
DOI: https://doi.org/10.1007/s10800-004-1703-3