Abstract
In this paper, an improved design method of millimeter wave wideband transition from double-ridge waveguide to coaxial line is introduced. The proposed design is based on the mode conversion theories and impedance matching techniques. The characteristics of the transition in microwave frequencies are analyzed and simulated by full-wave analysis software. According to the simulated results, a couple of transitions are fabricated. The predicted superduper performances have been confirmed experimentally in a wide frequency range of 18 ~ 40 GHz.
Similar content being viewed by others
References
M. E. Bialkowski, Analysis of a coaxial-to-waveguide adaptor including a discended probe and a tuning post, IEEE Trans. Microwave Theory Tech., vol. 43, no. 2, pp. 344-349, 1995.
R. B. Keam, and A. G.. Williamson, Broadband design of coaxial line/rectangular waveguide probe transition. IEE Proc. Microwaves, Antennas and Propagation, vol. 141, no. 1, pp. 53-58, 1994.
R. B. Keam, A. G. Williamson, Analysis of coaxial-line/rectangular waveguide junction with dielectrically sheathed probe, Electron. Lett., vol. 28, no. 3, pp. 240-241, 1992.
R. Levy, and L. W. Hendrick, Analysis and synthesis of in-line coaxial-to-waveguide adapters. IEEE MTT-S. International Microwave Symposium Digest, vol. 2, pp. 809-811, June, 2002.
Y Tikhov, S. S. In, H. W. Jone, and P. K. Jeong, Compact broadband transition from double-ridge waveguide to coaxial line, Electronics Letters, vol. 39, no. 6, pp. 530-532, 2003
S. Hopfer, The design of ridged waveguide, IEEE Trans. Microwave Theory Tech., vol. 3, pp. 20-29, 1995.
M. McKay, J. Helszajn, Voltage-current definition of impendence of single ridge waveguide, IEEE Microwave and Guided Wave Letters; vol. 9, no. 2, pp. 66-68, 1999.
S. B. Cohn, Properties of ridged waveguide, IEEE Proc., vol. 35, no. 8, pp. 783-788, 1947.
Y. B. Tian, B. Zhang, and X. Wang, Numerical method for solving characteristic parameters of square coaxial line, IEEE Antennas and Propagation International Symposium, pp. 73-76, 2007.
S. M. Musa, and M. N. O. Sadiku, Analysis of rectangular coaxial lines, IEEE Region 5 Technical Conference, Fayetteville, AR, pp. 322-325, April, 2007.
K. Garb, and R. Kastner, Characteristic Impedance of a rectangular double-ridged TEM line. IEEE Trans. Microwave Theory Tech., vol. 45, no. 4, pp. 554-557, 1997.
H. J. Riblet, The exact dimensions of a family of rectangular coaxial lines with given impedance. IEEE Trans. Microwave Theory Tech., vol. 20, no. 8, pp. 538-541, 1972.
T. S. Chen, Determination of the capacitance, inductance, and characteristic impedance of rectangular lines, IEEE Trans. Microwave Theory Tech., vol. 8, no. 5, pp. 510-519, 1960.
J. C. Tippet, D. C. Chang, Characteristic impedance of a rectangular coaxial line with offset inner conductor, IEEE Trans. Microwave Theory Tech., vol. 26, no. 11, pp. 876-883, 1978.
Z. Szczypka, Characteristic impedance of a cylindrical-rectangular coaxial line with offset inner circular conductor, MIKON '98., 12th International Conference on, Microwaves and Radar, Krakow, pp. 197-201, 1998.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhou, Y., Li, E., Guo, GF. et al. Design of Millimeter Wave Wideband Transition From Double-ridge Waveguide to Coaxial Line. J Infrared Milli Terahz Waves 32, 26–33 (2011). https://doi.org/10.1007/s10762-010-9747-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10762-010-9747-4