Abstract
The presence of several trace elements, heavy metals, and antimony in polyethylene terephthalate–bottled local raw cow milk samples of Iğdır region in Turkey was investigated. The milk samples were analyzed by inductively coupled plasma mass spectrometry after microwave-assisted digestion. Milk samples were categorized into three groups according to the element level intensity in the sample. While 70% of samples showed 2.5 times the maximum Turkish and European permissible level of lead, the lowest lead-contaminated sample exhibited 1.25 times this level. All the examined samples exceeded the maximum permissible limit administrated for arsenic and 35% of samples exhibited 5 times this limit. Results showed 40% of samples contain an antimony level higher than the Turkish maximum allowable concentration. The high antimony content of raw milk samples may be related to the release of antimony from the PET (polyethylene terephthalate) bottles. This study showed high contamination levels of the most toxic trace elements, i.e., lead and arsenic in milk and possible antimony contamination from PET bottles which may cause many health hazards for the consumers.
Similar content being viewed by others
References
Al-Otoum, F., Al-Ghouti, M. A., Costa, O. S., & Khraisheh, M. (2017). Impact of temperature and storage time on the migration of antimony from polyethylene terephthalate (PET) containers into bottled water in Qatar. Environmental Monitoring and Assessment, 189, 631.
Andra, S. S., Makris, K. C., Shine, J. P., & Lu, C. (2012). Co-leaching of brominated compounds and antimony from bottled water. Environment International, 38, 45–53.
Ayar, A., Sert, D., & Akın, N. (2009). The trace metal levels in milk and dairy products consumed in middle Anatolia—Turkey. Environmental Monitoring and Assessment, 152, 1–12.
Belzile, N., Chen, Y.-W., & Filella, M. (2011). Human exposure to antimony: I. Sources and intake. Critical Reviews in Environmental Science and Technology, 41, 1309–1373.
Cederberg, D.L., Christiansen, M., Ekroth, S., Engman, J., Fabech, B., Guðjónsdóttir, K., Håland, J.T., Jónsdóttir, I., Kostaomo, P., Legind, C., (2015). Food contact materials-metals and alloys: Nordic guidance for authorities, industry and trade. Nordic Council of Ministers.
Chapa-Martínez, C. A., Hinojosa-Reyes, L., Hernández-Ramírez, A., Ruiz-Ruiz, E., Maya-Treviño, L., & Guzmán-Mar, J. L. (2016). An evaluation of the migration of antimony from polyethylene terephthalate (PET) plastic used for bottled drinking water. Science of the Total Environment, 565, 511–518. https://doi.org/10.1016/j.scitotenv.2016.04.184.
Cheung Chung, S. W., Kwong, K. P., Yau, J. C. W., & Wong, W. W. K. (2008). Dietary exposure to antimony, lead and mercury of secondary school students in Hong Kong. Food Additives and Contaminants, 25, 831–840.
Codex, T.F., (2011). Turkish food codex regulation on contaminants. Ankara, Turkey, Off. Gaz.
Duh, B. (2002). Effect of antimony catalyst on solid-state polycondensation of poly (ethylene terephthalate). Polymer, 43, 3147–3154.
Fan, Y. Y., Zheng, J. L., Ren, J. H., Luo, J., Cui, X. Y., & Ma, L. Q. (2014). Effects of storage temperature and duration on release of antimony and bisphenol A from polyethylene terephthalate drinking water bottles of China. Environmental Pollution, 192, 113–120. https://doi.org/10.1016/j.envpol.2014.05.012.
Greifenstein, M., White, D. W., Stubner, A., Hout, J., & Whelton, A. J. (2013). Impact of temperature and storage duration on the chemical and odor quality of military packaged water in polyethylene terephthalate bottles. Science of the Total Environment, 456, 376–383.
Güler, C. (2007). Evaluation of maximum contaminant levels in Turkish bottled drinking waters utilizing parameters reported on manufacturer’s labeling and government-issued production licenses. Journal of Food Composition and Analysis, 20, 262–272.
Hureiki, L., & Mouneimne, Y. (2012). Antimony release in PET bottled natural water in Lebanon. Water Sci. Technol. Water Supply, 12, 193–199.
Ismail, A., Riaz, M., Akhtar, S., Goodwill, J. E., & Sun, J. (2019). Heavy metals in milk: global prevalence and health risk assessment. Toxin Reviews, 38, 1–12.
Jung, T., Derra, R., & Hingerl, A. (2006). Determination of antimony in olive oil by atomic absorption spectrometry. Deutsche Lebensmittel-Rundschau, 102(4), 150–153.
Keresztes, S., Tatár, E., Mihucz, V. G., Virág, I., Majdik, C., & Záray, G. (2009). Leaching of antimony from polyethylene terephthalate (PET) bottles into mineral water. Science of the Total Environment, 407, 4731–4735.
Khan, N., Jeong, I. S., Hwang, I. M., Kim, J. S., Choi, S. H., Nho, E. Y., Choi, J. Y., Park, K. S., & Kim, K. S. (2014). Analysis of minor and trace elements in milk and yogurts by inductively coupled plasma-mass spectrometry (ICP-MS). Food Chemistry, 147, 220–224.
Meshref, A. M., Moselhy, W. A., & Hassan, N. E. H. Y. (2014). Heavy metals and trace elements levels in milk and milk products. Journal of Food Measurement and Characterization, 8(4), 381–388.
Millour, S., Noël, L., Kadar, A., Chekri, R., Vastel, C., Sirot, V., Leblanc, J.-C., & Guérin, T. (2011). Pb, Hg, Cd, As, Sb and Al levels in foodstuffs from the 2nd French total diet study. Food Chemistry, 126, 1787–1799.
Nagajyoti, P. C., Lee, K. D., & Sreekanth, T. V. M. (2010). Heavy metals, occurrence and toxicity for plants: a review. Environmental Chemistry Letters, 8, 199–216.
Rowell, C., Kuiper, N., & Preud’Homme, H. (2016). Is container type the biggest predictor of trace element and BPA leaching from drinking water bottles? Food Chemistry, 202, 88–93.
Sager, M., McCulloch, C. R., & Schoder, D. (2018). Heavy metal content and element analysis of infant formula and milk powder samples purchased on the Tanzanian market: international branded versus black market products. Food Chemistry, 255, 365–371.
Saglam, C. (2013). Heavy metal accumulation in the edible parts of some cultivated plants and media samples from a volcanic region in Southern Turkey. Ekoloji, 22, 1–8.
Shotyk, W., & Krachler, M. (2007). Contamination of bottled waters with antimony leaching from polyethylene terephthalate (PET) increases upon storage. Environmental Science & Technology, 41, 1560–1563.
Simsek, O., Gültekin, R., Öksüz, O., & Kurultay, S. (2000). The effect of environmental pollution on the heavy metal content of raw milk. Food/Nahrung, 44, 360–363.
Temiz, H., & Soylu, A. (2012). Heavy metal concentrations in raw milk collected from different regions of Samsun, Turkey. International Journal of Dairy Technology, 65, 516–522.
Vidovic, M., Sadibasic, A., Cupic, S., & Lausevic, M. (2005). Cd and Zn in atmospheric deposit, soil, wheat, and milk. Environmental Research, 97, 26–31.
Westerhoff, P., Prapaipong, P., Shock, E., & Hillaireau, A. (2008). Antimony leaching from polyethylene terephthalate (PET) plastic used for bottled drinking water. Water Research, 42, 551–556.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Ethical approval
This article does not contain any studies with human participants or animals performed by any of the authors.
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
ESM 1
(DOCX 26.3 kb)
Rights and permissions
About this article
Cite this article
Koyuncu, M., Alwazeer, D. Determination of trace elements, heavy metals, and antimony in polyethylene terephthalate–bottled local raw cow milk of Iğdır region in Turkey. Environ Monit Assess 191, 666 (2019). https://doi.org/10.1007/s10661-019-7851-z
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s10661-019-7851-z