Abstract
Fly ash from coal combustion contains trace elements which, on disposal or utilisation, may leach out, and therefore be a potential environmental hazard. Environmental conditions have a great impact on the mobility of fly ash constituents as well as the physical and chemical properties of the fly ash. Existing standard leaching methods have been shown to be inadequate by not representing possible disposal or utilisation scenarios. These tests are often criticised on the grounds that the results estimated are not reliable as they are not able to be extrapolated to the application scenario. In order to simulate leaching behaviour of fly ash in different environmental conditions and to reduce deviation between measurements in the fields and the laboratories, it is vital to study sensitivity of the fly ash constituents of interest to major factors controlling leachability. pH, liquid-to-solid ratio, leaching time, leachant type and redox potential are parameters affecting stability of elements in the fly ash. Sensitivity of trace elements to pH and liquid to solid ratio (as two major overriding factors) has been examined. Elements have been classified on the basis of their leaching behaviour under different conditions. Results from this study have been used to identify leaching mechanisms. Also the fly ash has been examined under different standard batch leaching tests in order to evaluate and to compare these tests. A Leaching Test Framework has been devised for assessing the stability of trace elements from fly ashes in different environments. This Framework assists in designing more realistic batch leaching tests appropriate to field conditions and can support the development of regulations and protocols for the management and disposal of coal combustion by-products or other solid wastes of environmental concern.
Similar content being viewed by others
References
ASTMD3987-85 (2001). USA, American Society for Testing and Materials, Annual Book of ASTM, Standards, vol. 11, 04.
Baba, A., & Kaya, A. (2004). Leaching characteristics of solid wastes from thermal power plants of western Turkey and comparison of toxicity methodologies. Journal of Environmental Management, 73, 199–207.
Benito, Y., Ruiz, M., Cosmen, P., & Merino, J. L. (2001). Study of leaches obtained from the disposal of fly ash from PFBC and AFBC processes. Chemical Engineering Journal, 84, 167–171.
Brunori, C., Balzamo, S., & Morabito, R. (2001). Comparison between different leaching tests for the evaluation of metal release from fly ash. Journal of Analytical Chemistry, 371, 843–848.
BSEN 12457 (2002). Characterisation of Waste — Leaching — Compliance test for leaching of granular waste materials and sludges. UK, British Standard.
Bushell, A. J. (1997). The occurrence of trace elements in UK coals and their fate on gasification and disposal of residues. Department of Materials. London: Imperial College.
Chang, E. E., Chiang, P. C., Lu, P. H., & Ko, Y. W. (2001). Comparison of metal leachability for various wastes by extraction and leaching methods. Chemosphere, 45, 91–99.
Choi, S. K., Lee, S., Song, Y. K., & Moon, H. S. (2002). Leaching characteristic of selected Korean fly ashes and its implications for the groundwater composition near the ash disposal mound. Fuel, 81, 1083–1090.
Clarke, L. B., & Sloss, L. L. (1992). Trace elements. London: IEA Coal Research.
Crawford, J. (1999). A model of pH and redox buffer depletion in waste landfills. Department of Chemical Engineering and Technology. Stockholm, Sweden: Royal Institute of Technology.
Dreesen, D. R., Gladney, E. S., Owens, J. W., Perkins, B. L., Wienke, C. L., & Wangen, L. E. (1977). Comparison of levels of trace elements extracted from fly ash and levels found in effluent waters from a coal fired power plant. Environmental Science and Technology, 11, 1017–1019.
Dudas, M. J., & Warren, C. J. (1987). Submicroscopic model of fly ash particles. Geoderma, 40, 101–114.
Egemen, E., & Yurtri, C. (1996). Regulatory leaching tests for fly ash: A case study. Waste Management & Research, 14, 43–50.
Eighmy, T. T., et al. (1995). Comprehensive approach toward understanding element speciation and leaching behaviour in municipal solid waste incineration electrostatic precipitator ash. Environmental Science & Technology, 29, 629–646.
Fallman, A. M. (1997). Performance and design of the availability test for measurement of potentially leachable amounts from waste materials. Environmental Science & Technology, 31, 735–744.
Fleming, L. N., Abinteh, H. N., & Inyang, H. I. (1996). Leachant pH effects on the leachability of metals from fly ash. Journal of Soil Contamination, 5, 53–59.
Fytianos, K., & Tsaniklidi, B. (1998). Leachability of heavy metals in Greek fly ash from coal combustion. Environment International, 24(4), 477–486.
Ghosh, A., Mukiibi, M., & Ela, W. (2004). TCLP underestimates leaching of arsenic from solid residuals under landfill conditions. Environmental Science & Technology, 38, 4677–4682.
Janos, P., Wildnerova, M., & Loucka, T. (2002). Leaching of metals from fly ashes in the presence of complexing agents. Waste Management, 22, 783.
Jones, D. R. (1995). The leaching of major and trace elements from coal ash. In D. J. Swaine & F. Goodarzi (Eds.), Environmental aspects of trace elements in coal (p. 221). Netherland: Kluwer.
Kim, A. G., Kazonich, G., & Dahlberg, M. (2003). Relative solubility of cations in class F fly ash. Environmental Science & Technology, 37, 4507–4511.
Kosson, D. S., van der Sloot, H. A., Sanchez, F., & Garrabrants, A. C. (2002). An integrated framework for evaluating leaching in waste management and utilisation of secondary materials. Environmental Engineering Science, 19, 159–204.
Llorens, J. F., Fernandez-Turiel, J. L., & Querol, X. (2001). The fate of trace elements in a large coal-fired power plant. Environmental Geology, 40, 409–416.
Mehnert, E., & Hensel, B. R. (2000). Coal combustion by-products and contaminant transport in groundwater. Proceedings of the use and disposal of coal combustion by-products at coal mines: A technical interactive forum. Morgantown, West Virginia, USA: The National Energy Technology Laboratory.
Nathan, Y., Dvorachek, M., Pelly, I., & Mimran, U. (1999). Characterization of coal fly ash from Israel. Fuel, 78, 205–213.
NEN 7341 (1995). Leaching characteristics of solid building and waste materials. Leaching tests. Determination of the availability of inorganic components for leaching. Netherlands Normalisation Institute.
Otero-Rey, J. R., Mato-Fernandez, M. J., Moreda-Pineiro, J., Alonso-Rodriguez, E., Muniategui-Lorenz, S., Lopez-Maha, P., et al. (2005). Influence of several experimental parameters on As and Se leaching from coal fly ash samples. Analytica Chimica Acta Article. In press.
Querol, X., Umana, J. C., Alastuey, A., Ayora, C., Lopez-Soler, A., & Plana, F. (2001). Extraction of soluble major and trace elements from fly ash in open and closed leaching systems. Fuel, 80, 801–813.
Sear, L. K. A. (2001). The properties and use of coal fly ash. Thomas Telford.
Singh, G., & Paul, B. C. (2001). Assessment of groundwater quality impacts due to use of coal combustion byproducts to control subsidence from underground mines. Environment International, 26, 567–571.
TCLP 1311 (1990). Toxicity Characteristic Leaching Procedure. USA, Federal Register, 55(261) (March).
Teixeira, E. C., Samma, J., & Brun, A. (1992). Study of different leaching methods of metallic elements from coal fly ash. Environmental Technology, 13, 1187.
USEPA (1987). Characterisation of municipal waste combustor ashes and leachates from municipal solid waste landfills and co-disposal sites. Washington DC, USA: US Environmental Protection Agency.
van der Hoek, E. E., & Comans, R. N. J. (1994). Speciation of As and Se during leaching fly ash. Environmental Aspects of Construction with Waste Materials, 60, 467–476.
van der Hoek, E. E., van Elteren, J. T., & Comans, R. N. J. (1996). Determination of As, Sb and Se speciation in fly ash leachates. International Journal of Environmental Analytical Chemistry, 63, 67–79.
van der Sloot, H. A., Heasman, L., & Quevauviller, Ph. (1997). Harmonization of leaching/extraction tests. Amsterdam, Netherlands: Elsevier.
Wang, J., Sharma, A., & Tomita, A. (2003). Determination of the modes of occurrence of trace elements in coal by leaching coal and coal ashes. Energy and Fuels, 17, 29–37.
Wang, Y., Deyi, R., & Zhao, F. (1999). Comparative leaching experiments for trace elements in raw coal, laboratory ash, fly ash and bottom ash. International Journal of Coal Geology, 40, 103–108.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zandi, M., Russell, N.V. Design of a Leaching Test Framework for Coal Fly Ash Accounting for Environmental Conditions. Environ Monit Assess 131, 509–526 (2007). https://doi.org/10.1007/s10661-006-9496-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10661-006-9496-y