Abstract
This study revealed the effects of spray-dried cellulose nanofibril (SDCNF) addition (3,10 and 30 wt%) and maleic anhydride polypropylene (MAPP) coupling agent (2 wt%) on the mechanical properties of polypropylene (PP). Results indicated that the elastic moduli of the PP composites increased as the SDCNF content increased above 10 wt%. The addition of MAPP into the SDCNF/PP composites did not improve the elastic moduli. Flexural strength of PP was improved when the SDCNF content increased above 10 wt%, while the tensile strength of PP decreased as the SDCNF content increased. The addition of MAPP into the SDCNF/PP composites increased the strength of the composites when the SDCNF content was above 10 wt%. Without the addition of MAPP, the composite’s impact strength did not exhibit a significant increase among the pure PP and SDCNF/PP composites. No significant differences in crystallinity or crystal forms were found in the pure PP and PP/MAPP/SDCNF composites. The spherulitic size of PP was reduced after adding SDCNF into the PP.
Similar content being viewed by others
References
Ahmed S, Jones FR (1990) A review of particulate reinforcement theories for polymer composites. J Mater Sci Lett 25(12):4933–4942
Arencón D, Velasco JI (2009) Fracture toughness of polypropylene-based particulate composites. Materials 2:2046–2094
Bengtsson M, Le Baillif M, Oksman K (2007) Extrusion and mechanical properties of highly filled cellulose fibre–polypropylene composites. Compos Part A Appl Sci Manuf 38(8):1922–1931
Bourbigot S, Garnier L, Revel B, Duquesne S (2013) Characterization of the morphology of iPP/sPP blends with various compositions. Express Polym Lett 7:224–237
Eichhorn SJ, Baillie CA, Zafeiropoulos N, Mwaikambo LY, Ansell MP, Dufresne A, Entwistle KM, Herrera-Franco PJ, Escamilla GC, Groom L, Hughes M (2001) Review: current international research into cellulosic fibres and composites. J Mater Sci Lett 36(9):2107–2131
Fu SY, Feng XQ, Lauke B, Mai YW (2008) Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites. Compos Part B Eng 39(6):933–961
Gardner DJ, Tajvidi M (2016) Hydrogen bonding in wood-based materials: an update. Wood Fiber Sci 48(4):234–244
Gardner DJ, Han Y, Wang L (2015) Wood–plastic composite technology. Curr For Rep 1(3):139–150
Hassan ML, Mathew AP, Hassan EA, Fadel SM, Oksman K (2014) Improving cellulose/polypropylene nanocomposites properties with chemical modified bagasse nanofibers and maleated polypropylene. J Reinf Plast Compos 3(1):26–36
Hiemenz PC, Lodge TP (2007) Polymer chemistry. CRC Press, Boca Raton
Hodgkinson JM (2000) Mechanical testing of advanced fiber composites. CRC Press, Boca Raton
Hubbe MA, Rojas OJ, Lucia LA, Sain M (2008) Cellulosic nanocomposites: a review. BioResources 3(3):929–980
Kalia S, Boufi S, Celli A, Kango S (2014) Nanofibrillated cellulose: surface modification and potential applications. Colloid Polym Sci 292(1):5–31
Khalil HA, Bhat AH, Yusra AI (2012) Green composites from sustainable cellulose nanofibrils: a review. Carbohydr Polym 87(2):963–979
La Mantia FP, Morreale M (2011) Green composites: a brief review. Compos Part A Appl Sci Manuf 42:579–588
Landel RF, Nielsen LE (1993) Mechanical properties of polymers and composites. Marcel Dekker, New York
Liu GR (1997) A step-by-step method of rule-of-mixture of fiber-and particle-reinforced composite materials. Compos Struct 40:313–322
Miao C, Hamad WY (2013) Cellulose reinforced polymer composites and nanocomposites: a critical review. Cellulose 20(5):2221–2262
Missoum K, Belgacem MN, Bras J (2013) Nanofibrillated cellulose surface modification: a review. Materials 6(5):1745–1766
Moon RJ, Martini A, Nairn J, Simonsen J, Youngblood J (2011) Cellulose nanomaterials review: structure, properties and nanocomposites. Chem Soc Rev 40(7):3941–3994
Peltola P, Välipakka E, Vuorinen J, Syrjälä S, Hanhi K (2006) Effect of rotational speed of twin screw extruder on the microstructure and rheological and mechanical properties of nanoclay-reinforced polypropylene nanocomposites. Polym Eng Sci 46(8):995–1000
Peng Y, Gardner DJ, Han Y (2011) Drying cellulose nanofibrils: in search of a suitable method. Cellulose 19(1):91–102
Peng Y, Han Y, Gardner DJ (2012) Spray-drying cellulose nanofibrils: effect of drying process parameters on particle morphology and size distribution. Wood Fiber Sci 44(4):448
Peng Y, Gallegos SA, Gardner DJ, Han Y, Cai Z (2014) Maleic anhydride polypropylene modified cellulose nanofibril polypropylene nanocomposites with enhanced impact strength. Polym Compos 37(3):782–793
Saputra H, Simonsen J, Li K (2004) Effect of extractives on the flexural properties of wood/plastic composites. Compos Interface 11(7):515–524
Sato N, Kurauchi T, Sato S, Kamigaito O (1988) Reinforcing mechanism by small diameter fiber in short fiber composite. J Compos Mater 22(9):850–873
Siqueira G, Bras J, Dufresne A (2010) Cellulosic bionanocomposites: a review of preparation, properties and applications. Polymers 2(4):728–765
Siró I, Plackett D (2010) Microfibrillated cellulose and new nanocomposite materials: a review. Cellulose 17(3):459–494
Suzuki K, Okumura H, Kitagawa K, Sato S, Nakagaito AN, Yano H (2013) Development of continuous process enabling nanofibrillation of pulp and melt compounding. Cellulose 20(1):201–210
Suzuki K, Sato A, Okumura H, Hashimoto T, Nakagaito AN, Yano H (2014) Novel high-strength, micro fibrillated cellulose-reinforced polypropylene composites using a cationic polymer as compatibilizer. Cellulose 21(1):507–518
Tze WT, O’Neill SC, Tripp CP, Gardner DJ, Shaler SM (2007) Evaluation of load transfer in the cellulosic-fiber/polymer interphase using a micro-Raman tensile test. Wood Fiber Sci 39(1):184–195
Wang L, Gardner DJ (2017) Effect of fused layer modeling (FLM) processing parameters on impact strength of cellular polypropylene. Polymer 113:74–80
Wang P, Liu J, Yu W, Zhou C (2011) Isothermal crystallization kinetics of highly filled wood plastic composites: effect of wood particles content and compatibilizer. J Macromol Sci B 50(12):2271–2289
Wang L, Sanders JE, Gardner DG, Han Y (2016) In-situ modification of cellulose nanofibrils by organosilanes during spray drying. Ind Crops Prod 93:129–135
Wang L, Gramlich WM, Gardner DJ (2017a) Improving the impact strength of Poly (lactic acid)(PLA) in fused layer modeling (FLM). Polymer 114:242–248
Wang L, Gardner DJ, Bousfield DW (2017b) Cellulose nanofibril-reinforced polypropylene composites for material extrusion: rheological properties. Polym Eng Sci. https://doi.org/10.1002/pen.24615
Yang HS, Gardner DJ, Nader JW (2013a) Morphological properties of impact fracture surfaces and essential work of fracture analysis of cellulose nanofibril-filled polypropylene composites. J Appl Polym Sci 128(5):3064–3076
Yang HS, Kiziltas A, Gardner DJ (2013b) Thermal analysis and crystallinity study of cellulose nanofibril-filled polypropylene composites. J Therm Anal Calorim 113(2):673–682
Acknowledgments
Funding is provided in part by the Maine Agricultural and Forest Experiment Station (MAFES) Project ME0-M-8-00527-13 and the USDA ARS Forest Products Research Agreement 58-0202-4-003. Authors thank Kelly Edwards in the Electron Microscopy Lab for section cutting and Dr. Mehdi Tajvidi in the School of Forest Resources for polarized light microscope observation at the University of Maine.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wang, L., Roach, A.W., Gardner, D.J. et al. Mechanisms contributing to mechanical property changes in composites of polypropylene reinforced with spray-dried cellulose nanofibrils. Cellulose 25, 439–448 (2018). https://doi.org/10.1007/s10570-017-1556-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10570-017-1556-7