Abstract
In the present paper, the influence of tubule orientation on surface texture development was studied. Specimens of dentin with a wide range of tubule orientations were extracted from caries-free human teeth, processed using KrF laser radiation, and analyzed by scanning electron microscopy. When a transverse cross section of dentin cut perpendicularly to the tooth axis is processed with KrF laser radiation, a cone-like topography develops in the inner dentin where tubules are parallel to the laser beam. When laser processing is carried out in the outer dentin, because tubules are significantly tilted with respect to the laser beam, flat surfaces are achieved. The surface texture after laser processing depends effectively on the angle between the tubules and the laser beam. The dependency of cone growth on tubule orientation was confirmed using a simple differential ablation model.
Similar content being viewed by others
References
Dankner E, Neev J, Stabholz A, Rotstein I (1997) Effect of XeCl-308nm excimer laser on the mineral content of human dentin. Endod Dent Traumatol 13:234–237
Patel BCM, Moss J, Pearson GJ (1994) Excimer laser (248 nm) drilling of tooth tissue—preliminary investigation. Lasers Med Sci 9:243–248
Sanchez F, Tost AJE, Morenza JL (1997) ArF excimer laser irradiation of human dentin. Lasers Surg Med 21:474–479
Wilder-Smith P, Lin S, Nguyen A, Liaw LH, Arrastia AMA, Lee JP, Berns MW (1997) Morphological effects of ArF excimer laser irradiation on enamel and dentin. Lasers Surg Med 20:142–148
Neev J, Raney D, Whalen WE, Fujishige JT, Ho PD, McGrann JV, Berns MW (1991) Ablation of hard dental tissues with an ArF pulsed excimer laser. Proc SPIE Int Soc Opt Eng 1427:162–172
Melis M, Berna G, Berna N, Benvenuti A, Tosot S, Larciprete R, Pierdominici F (1994) Ablation of hard dental tissue by ArF and XeCl excimer lasers. Proc SPIE Int Soc Opt Eng 2128:349–358
Eugénio S, Sivakumar M, Vilar R, Rego AM (2005) Characterization of dentin surfaces processed with KrF excimer laser radiation. Biomaterials 26:6780–6787
Oliveira V, Simões F, Vilar R (2005) Column-growth mechanisms during KrF laser micromachining of Al2O3-TiC ceramics. Appl Phys A 81:1157–1162
Foltyn SR (1994) Surface modification of materials by cumulative laser irradiation. In: Chrisey DB, Hubler GK (eds) Pulsed laser deposition of thin films. Wiley, New York, pp 89–113
Usoskin A, Freyhardt HC, Krebs HU (1999) Influence of light scattering on the development of laser induced ridge-cone structure on target surfaces. Appl Phys A 69:S823–S826
ISO/TS 11405 (2003) Dental materials—testing of adhesion to tooth structure. International Standard Organization, Geneva, Switzerland
Perdigão J, Lambrechts P, Vanmeerbeek B, Vanherle G, Lopes ALB (1995) Field-emission SEM comparison of 4 postfixation drying techniques for human dentin. J Biomed Mater Res 29:1111–1120
Acknowledgements
This work was financially supported by the Portuguese Fundação para a Ciência e Tecnologia (FCT) under the project “TexMed—laser surface microtexturing for biomedical applications” (ref. POCTI/FCT/41402/2001). M. Sivakumar and V. Oliveira acknowledge the grants from FCT.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sivakumar, M., Oliveira, V., Oliveira, S. et al. Influence of tubule orientation on cone-shaped texture development in laser-ablated dentin. Lasers Med Sci 21, 160–164 (2006). https://doi.org/10.1007/s10103-006-0391-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10103-006-0391-0