Abstract.
A method is described for determination of 14 trace elements in super alloy certified reference material. Inconel 718 by ICP-MS. The interferences were investigated in detail. By using appropriate settings of the operational parameters and correcting interferences the elements without interference free isotopes were also analyzed. Non-spectral interference to the analytes was studied. No matrix separation or any other sample pretreatment but acid dissolution was made. 14 trace elements (B, Sc, Ga, Ge, In, Sn, Sb, Te, Hf, Ag, Ce, Tl, Pb and Bi) were analyzed by matrix matched standard solution calibration and using Rh as internal standard. Good agreement was achieved between the found levels and the certified values for most of the elements. The RSD (n = 4) of the determination values of Ce was lower than 20%, and RSD of the other 13 elements was lower than 10%.
Similar content being viewed by others
Author information
Authors and Affiliations
Additional information
Received July 21, 2000. Revision May 29, 2001.
Rights and permissions
About this article
Cite this article
Hu, J., Wang, H. Determination of Trace Elements in Super Alloy by ICP-MS. Mikrochim Acta 137, 149–155 (2001). https://doi.org/10.1007/s006040170005
Issue Date:
DOI: https://doi.org/10.1007/s006040170005