Abstract
The structural changes of the cell wall and crystalline cellulose of Quercus variabilis wood in a pyrolysis system at several temperatures ranging from 250 to 500°C were investigated to examine the wood carbonization characteristics. The volume of the wood sample was decreased and the weight loss was increased by increasing the carbonization temperature. Vessels collapsed severely in tangential direction during the charring process above 350°C. SEM observation indicated that the layering structure of the walls in wood fibers and parenchyma cells were retained below 300°C. However, the cell walls above 350°C changed to an amorphous-like structure without cell wall layering. X-ray diffraction confirmed that the cellulose crystalline substance was still remained at the carbonization temperature of 300°C but was not detected above 350°C. It can be concluded that the transition from Q. variabilis wood to charcoal might occur at approximately 350°C.
Similar content being viewed by others
References
Angeles G (2001) New techniques for the anatomical study of charcoalified wood. IAWA J 22(3):245–254
Beall FC, Eickner JW (1970) Thermal degradation of wood components. USDA Forest Research paper FPL 130
Beall FC, Blankenhorn PR, Moore GR (1974) Carbonized wood—physical properties and uses as an SEM preparation. Wood Sci 6:212–219
Beramendi-Orosco LE, Castro-Díaz M, Snape CE, Vane CH, Large DJ (2004) Application of catalytic hydropyrolysis for the rapid preparation of lignin concentrates from wood. Org Geochem 35:61–72
Byrne CE, Nagle DC (1997a) Carbonization of wood for advanced materials applications. Carbon 35(2):259–266
Byrne CE, Nagle DC (1997b) Carbonized wood monoliths—characterization. Carbon 35(2):267–273
Cutter BE, Cumbie BG, McGinnes EA Jr (1980) SEM and shrinkage analyses of southern pine wood following pyrolysis. Wood Sci Technol 14:115–130
Ehrburger P, Lahaye J (1982) Effect of carbonization on the porosity of beechwood. Carbon 20(5):433–439
Erçin D, Yuda T (2003) Carbonization of Fir (Abies bornmulleriana) wood in an open pyrolysis system at 50–300°C. J Anal Appl Pyrolysis 67:11–22
Honma S, Sano Y, Kubota M, Umehara K, Komozawa K (2001) Chemical structure and ammonia adsorption ability of Todomatsu (Abies sachalinensis Masters) wood carbonized in nitrogen and air atmospheres. J Hokkaido For Prod Res Inst 15(1):1–7
Kim NH, Hanna RB (2006) Morphological characteristics of Quercus variabilis charcoal prepared at different temperatures. Wood Sci Technol 40(5):392–401
Kotilainen RA, Toivanen T-J, Alen RJ (2000) FTIR monitoring of chemical changes in softwood during heating. J Wood Chem Technol 20(3):307–320
Kumar M, Gupta RC (1995) Scanning electron microscopic study of Acacia and Eucalyptus wood chars. J Mater Sci 30:544–551
Kumar M, Gupta RC, Sharma T (1992) Effect of carbonization conditions on the yield and chemical composition of Acacia and Eucalyptus wood chars. Biomass Bioenergy 3(16):411–417
Kurosaki F, Ishimaru K, Hata T, Bronsveld P, Kobayashi E, Imamura Y (2003) Microstructure of wood charcoal prepared by flash heating. Carbon 41:3057–3062
Lee OK, Jo TS, Choi JW (2007) Changes in properties and surface FT-IR spectra of wood charcoal at different carbonization temperatures. Mokche Konghak 35(4):21–28
McGinnes EA Jr, Kandeel SA, Szopa PS (1971) Some structure changes observed in the transformation of wood into charcoal. Wood Fiber 3(2):77–83
Myung SY, Eom YJ, Dong JI, Park YK, Kang BS, Jeon JK (2004) Characteristics of thermal decomposition of major components of biomass isolated from wood. J Korean Ind Eng Chem 15(8):896–900
Nishimiya K, Hata T, Imamura Y, Ishihara S (1995) Mechanism and clarification of electrical conduction through wood charcoal. Wood Res 82:34–36
Nishimiya K, Hata T, Imamura Y, Ishihara S (1998) Analysis of chemical structure of wood charcoal by X-ray photoelectron spectroscopy. J Wood Sci 44:56–61
Paris O, Zollfrank C, Zickler GA (2005) Decomposition and carbonisation of wood biopolymers—a microstructural study of softwood pyrolysis. Carbon 43:53–66
Pastor-Villegas J, Rodríguez JMM, Pastor-Valle JF, García MG (2007) Changes in commercial wood charcoals by thermal treatments. J Anal Appl Pyrolysis 80:507–514
Prior J, Alvin KL (1983) Structure changes on charring of Dichrostashys and Salix from Southern Africa. IAWA J 4(4):197–206
Prior J, Gasson P (1993) Anatomical changes on charring six African hardwoods. IAWA J 14(1):77–86
Pulido-Novicio L, Hata T, Kuramoto Y, Doi S, Ishihara S, Imamura Y (2001) Adsorption capacities and related characteristics of wood charcoals carbonized using a one-step or two-step process. J Wood Sci 47:48–57
Slocum DH, McGinnes EA Jr, Beall FC (1978) Charcoal yield, shrinkage, and density changes during carbonization of oak and hickory woods. Wood Sci 11(1):42–47
Treusch O, Hofenauer A, Tröger F, Fromm J, Wegener G (2004) Basic properties of specific wood-based materials carbonised in a nitrogen atmosphere. Wood Sci 38:323–333
Zawadzki J (1978) IR spectroscopy studies of oxygen surface compounds on carbon. Carbon 16:491–497
Zeriouh A, Belkbir L (1995) Thermal decomposition of a Moroccan wood under a nitrogen atmosphere. Thermochim Acta 258:243–248
Zickler GA, Wagermaier W, Funari SS, Burghammer M, Paris O (2007) In situ X-ray diffraction investigation of thermal decomposition of wood cellulose. J Anal Appl Pyrolysis 80:134–140
Acknowledgments
This study was carried out with the support of Forest Science & Technology Projects (S210707L010130) provided by Korea Forest Service and partially supported by the Institute of Forest Science in Kangwon National University, Korea.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kwon, SM., Kim, NH. & Cha, DS. An investigation on the transition characteristics of the wood cell walls during carbonization. Wood Sci Technol 43, 487–498 (2009). https://doi.org/10.1007/s00226-009-0245-6
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00226-009-0245-6