Skip to main content
SpringerLink
Log in

Assessment of non-uniform shrinkage in the laser sintering of polymer materials

  • ORIGINAL ARTICLE
  • Published:
The International Journal of Advanced Manufacturing Technology Aims and scope Submit manuscript

Abstract

Laser sintering technologies are well established in the rapid prototyping and rapid manufacturing industries, producing a wide range of products for an ever-increasing number of industry sectors. In theory, these processes facilitate direct digital fabrication from 3D CAD models, creating items that have very sophisticated geometries with high levels of quality and accuracy. However, the laser sintering fabrication process is susceptible to part shrinkage which in turn may lead to dimensional inaccuracies (and therefore quality degradation) of the finished item. This paper reviews the issue of shrinkage for laser sintering in the z-axis, and using an EOS P700 machine operating with polyamide-12 material, demonstrates a technique for the assessment of this problem. The experimental results quantify the magnitude of z-axis shrinkage, finding it to be both non-linear and linked to thermal inconsistencies in the build chamber. The study shows that z-axis non-linear shrinkage is likely in all builds; however, its linearity may be improved through placement of products in the centre of the build chamber. The data presented highlight that current operational practices of factorial adjustment for each axis of the build chamber are inadequate and demonstrates the implications of these inaccuracies across different size build components.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Wohlers TT (2010) Wohlers report 2010. Wohlers Associates Inc, Fort Collins

    Google Scholar 

  2. Pham DT, Dimov S, Lacan F (1999) Selective laser sintering: applications and technological capabilities. Proc IME B J Eng Manufact 213(5):435–449

    Article  Google Scholar 

  3. Eyers DR, Dotchev KD (2010) Technology review for mass customisation using rapid manufacturing. Assem Autom 30(1):39–46

    Article  Google Scholar 

  4. Hopkinson N, Hague RJM, Dickens PM (2006) Rapid manufacturing: an industrial revolution for the digital age. Wiley, Chichester

    Google Scholar 

  5. Dingal S, Pradhan TR, Sarin Sundar JK, Choudhury AR, Roy SK (2008) The application of Taguchi’s method in the experimental investigation of the laser sintering process. Int J Adv Manuf Technol 38(9–10):904–914

    Article  Google Scholar 

  6. Plunkett Associates (2008) Laser Sintering (SLS) of plastic parts. Available ffrom www.plunkettassociates.co.uk/parts-plastic-laser-sintering.asp

  7. Senthilkumaran K, Pandey PM, Rao PVM (2012) Statistical modelling and minimization of form error in SLS prototyping. Rapid Prototyp J 18(1):38–48

    Article  Google Scholar 

  8. Relvas C, Ramos AM, Completo A, Simões JA (2012) A systematic approach for accuracy level using rapid prototyping technologies. Proc IME B J Eng Manufact 226(12):2023–2034

    Article  Google Scholar 

  9. Kim GD, Oh YT (2008) A benchmark study on rapid prototyping processes and machines: quantitative comparisons of mechanical properties, accuracy, roughness, speed, and material cost. Proc IME B J Eng Manufact 222(2):201–215

    Article  MathSciNet  Google Scholar 

  10. Dulieu-Barton JM, Fulton MC (2000) Mechanical properties of a typical stereolithography resin. Strain 36(2):81–87. doi:10.1111/j.1475-1305.2000.tb01177.x

    Article  Google Scholar 

  11. Senthilkumaran K, Pandey PM, Rao PVM (2008) Shrinkage compensation along single direction dexel space for improving accuracy in selective laser sintering. Paper presented at the 4th IEEE Conference on Automation Science and Engineering, Washington DC, USA, 23–26 August 2008

  12. Tang Y, Loh HT, Fuh JYH, Wong YS, Lu L, Ning Y, Wang X (2003) Accuracy analysis and improvement for direct laser sintering. Paper presented at the SMA Autumn Symposium, Singapore

  13. Senthilkumaran K, Pandey PM, Rao PVM (2009) Influence of building strategies on the accuracy of parts in selective laser sintering. Mater Des 30(8):2946–2954. doi:10.1016/j.matdes.2009.01.009

    Article  Google Scholar 

  14. Nelson C, McAlea K, Gray D (1995) Improvements in SLS part accuracy. Paper presented at the SFF Symposium, Austin, Texas, USA, 7–9 August 1995

  15. Shen J, Steinberger K, Gopfert J, Gerner R, Daiber K, Manetsberger K, Ferstl S (2000) Inhomogeneous shrinkage of polymer materials in selective laser sintering. Paper presented at the SFF Symposium, Austin, Texas, USA, 8–10 August 2000

  16. Ho HCH, Cheung WL, Gibson L (2002) Effects of graphite powder on the laser sintering behaviour of polycarbonate. Rapid Prototyp J 8(4):233–242. doi:10.1108/13552540210441148

    Article  Google Scholar 

  17. Wegner A, Witt G (2011) Process monitoring in laser sintering using thermal imaging. Paper presented at the SFF Symposium, Austin, Texas, USA, 8–10 August 2011

  18. Grimm T (2004) User’s guide to rapid prototyping. SME, Dearborn

    Google Scholar 

  19. Tontowi AE, Childs THC (2001) Density prediction of crystalline polymer sintered parts at various powder bed temperatures. Rapid Prototyp J 7(3):180–184

    Article  Google Scholar 

  20. McWilliams J, Hysinger C, Beaman JJ (1992) Design of a high temperature process chamber for the selective laser sintering process. Paper presented at the SFF Symposium, Austin, Texas, USA, 10–12 August 1992

  21. Yuan M, Bourell D (2012) Efforts to reduce part bed thermal gradients during laser sintering process. Paper presented at the SFF Symposium, Austin, Texas, USA, 6–8 August 2012

  22. Yang H-J, Hwang P-J, Lee S-H (2002) A study on shrinkage compensation of the SLS process by using the Taguchi method. Int J Mach Tool Manuf 42(11):1203–1212

    Article  Google Scholar 

  23. Berry E, Brown JM, Connell M, Craven CM, Efford ND, Radjenovic A, Smith MA (1997) Preliminary experience with medical applications of rapid prototyping by selective laser sintering. Med Eng Phys 19(1):90–96. doi:10.1016/s1350-4533(96)00039-2

    Article  Google Scholar 

  24. Wang R-J, Wang L, Zhao L, Liu Z (2007) Influence of process parameters on part shrinkage in SLS. Int J Adv Manuf Technol 33(5–6):498–504

    Article  Google Scholar 

  25. Dotchev KD, Dimov SS, Pham DT, Ivanov AI (2007) Accuracy issues in rapid manufacturing CastForm patterns. Proc IME B J Eng Manufact 221(1):53–67

    Article  Google Scholar 

  26. Materialise NV (2011) Magics Rapid Prototyping Software. Available from http://www.materialise.com/Magics. Accessed 2 June 2011

  27. EOS (2004) EOSINT P700 Operation User Manual. 02.04 edn

  28. Ruffo M, Tuck CJ, Hague RJM (2006) Cost estimation for rapid manufacturing—laser sintering production for low to medium volumes. Proc IME B J Eng Manufact 220(9):1417–1427

    Article  Google Scholar 

  29. Yusoff W (2007) An investigation of the “orange peel” phenomenon. Cardiff University, Cardiff

    Google Scholar 

  30. Dotchev K, Yusoff W (2009) Recycling of polyamide 12 based powders in the laser sintering process. Rapid Prototyp J 15(3):192–203. doi:10.1108/13552540910960299

    Article  Google Scholar 

  31. EOS GmbH (2008) Parameter Sheet: Shrinkage Scaling. München, Germany

Download references

Author information

Authors and Affiliations

  1. Institute of Mechanical and Manufacturing Engineering, Cardiff University, Cardiff, UK

    S. P. Soe & R. Setchi

  2. Centre for Advanced Manufacturing Systems, Cardiff University, Cardiff, UK

    D. R. Eyers

Authors
  1. S. P. Soe
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. D. R. Eyers
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. R. Setchi
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to S. P. Soe.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Soe, S.P., Eyers, D.R. & Setchi, R. Assessment of non-uniform shrinkage in the laser sintering of polymer materials. Int J Adv Manuf Technol 68, 111–125 (2013). https://doi.org/10.1007/s00170-012-4712-0

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00170-012-4712-0

Keywords

Search

Navigation