Abstract
The tolerance allocation optimization method by fuzzy-set weight-center evaluation is used to derive the manufacturing difficulty coefficient, through quantifying the manufacturing condition factors which all affect the manufacturing cost, including the forming means of the blank, element size, machining surface features, operator’s skills, and material’s machinability. The coefficient is then converted into a weight factor used in the inversed square model representing the relationship between the cost and tolerance, a cost-objective function model based on optimal tolerance allocation according to the manufacturing conditions is thus established for optimizing and allocating the tolerances. Integrating this model into computer-aided-tolerance-allocation makes it more convenient, accurate, and feasible.
Similar content being viewed by others
References
Dupinet E, Balazinski M, Caogala E (1996) Tolerance allocation based on fuzzy logic and simulated annealing. J Intell Manuf 7:487–497
Ji SP, Sun HW, Ma YL et al. (2000) Study of a new mathematical model for tolerance optimization. J Harbin Instit Technol 32(3):12–16
Hu XW, Zhao JZ, Shi XD et al. (2000) Fuzzy comprehensive evaluation on manufacturing difficulty in tolerance allocating. ChinJ Mach Des 8:28–31
Ji SP, Li XL, Ma YL, Cai HG (2000) Optimal tolerance allocation based on fuzzy comprehensive evaluation and genetic algorithm. Int J AdvManuf Technol 16(7):461–468
Zhong SS (2000) Fuzzy theory and technology in engineering scheme design. Press of Harbin Institute of Technology, Harbin, pp 86–112 (in Chinese)
Wu ZZ (1999) Manual of machinery design. Chemical Industry Press, Beijing, pp 161–189 (in Chinese)
Yang JX, Wu ST, Gu DQ (1995) Study on cost-tolerance model based on manufacturing features. Eng Des 3:22–24 (in Chinese)
Wang CB (1996) Process fundamentals of machining. Press of Southeast University, pp 31–98 (in Chinese)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wang, Y., Zhai, Wj., Yang, Lp. et al. Study on the tolerance allocation optimization by fuzzy-set weight-center evaluation method. Int J Adv Manuf Technol 33, 317–322 (2007). https://doi.org/10.1007/s00170-006-0471-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-006-0471-0