Abstract
This paper investigates efficient approaches to improve the performance of a self-tuning adaptive control system for time-varying machining processes. The milling process is a typical time-varying system because of variations of the cutting conditions, e.g., the change of cutting depths and variation of the cutting materials. On the other hand, the milling processes are considered as typically non-minimum phases since one or more zeros of discrete-time models of milling processes may be located outside the unit circle. In this paper, an efficient method, using the pole assignment method, is presented to design a self-tuning adaptive controller for time-varying and non-minimum phase milling processes, and an effective method to select appropriate design parameters in order to improve its performance has been proposed. Its effectiveness has been verified in experiments on controlling milling processes with varying cutting depth. The experimental results illustrate that improved control performances can be obtained using the appropriate design parameters selected according to the principles and criteria presented here.
Similar content being viewed by others
References
Koren Y (1983) Computer control of manufacturing systems. McGraw-Hill, New York
Peng YH (1995) Neural network and fuzzy control in machining processes. ph.D. Dissertation, South China University of Technology
Ulsoy AG, Koren Y, Rasmussen F (1983) Principal developments in the adaptive control of machine tools. ASME J Dyn Sys Meas Cont 105:107–112
Fussell BK, Srinivasan K (1991) Adaptive control of force in end milling operations—an evaluation of available algorithms. J Manufact Sys 10(1):8–20
Koren Y, Masory O (1981) Adaptive control with process estimation. Annal CIRP 30(1):373–376
Masory O, Koren Y (1983) Variable gain adaptive control system for turning. J Manufact Sys 2(2):165–173
Daneshmend LK, Pak HA (1986) Model reference adaptive control of feed force in turning. ASME J Dyn Sys Meas Cont 108:215–222
Rober SJ, Shin YC (1996) Control of cutting force for end milling processes using an extended model reference adaptive control scheme. ASME J Manufact Sci Engin 118:339–347
Elbestwi MA, Sagherian R (1987) Parameter adaptive control in peripheral milling. Int J Mach Tool Manufact 27(3):399–414
Hsu PL, Hsieh MY (1994) Applications of self-tuning control on industrial CNC machines. Int J Mach Tool Manufact 34(6):859–877
Kim K, Huang SD (1992) Implementation of pole placement adaptive controller for force control of non-minimum phase end milling operations. Int J Mach Tool Manufact 32(3):619–627
Liu M, Liang SY (1989) Model reference adaptive of nonminimum-phase milling. Trans NA Manufact Res Inst SME 266–273
Han ZJ (1998) Adaptive control theory. Tsinghua University Press, Tsinghua
Ulsoy AG, Koren Y (1993) Control of machining processes. ASME J Dynam Sys Meas Cont 115:301–308
Chen BS, Chang YF (1989) Constant turning force adaptive controller design. ASME J Engin Indust 111:125–132
Lauderbaugh LK, Ulsoy AG (1988) Dynamic modeling for control of the milling process. ASME J Engin Indust 110:367–375
Altintas Y (1994) Direct adaptive control of end milling process. Int J Mach Tool Manufact 34(4):461–472
Ogata K (1995) Discrete-time control systems. Prentice-Hall, New York
Yao XF (1999) Fuzzy and neural adaptive control for intelligent machining systems. ph.D. Dissertation, South China University of Technology
Acknowledgements
This work has been supported by the National Natural Science Foundation of China (59905008) at the South China University of Technology.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Peng, Y.H. On the performance enhancement of self-tuning adaptive control for time-varying machining processes. Int J Adv Manuf Technol 24, 395–403 (2004). https://doi.org/10.1007/s00170-003-1678-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-003-1678-y