Abstract
In this study, the adhesion of PVA-glue on fibre board and particle board in the untreated state and plasma-treated with a dielectric barrier discharge (DBD) at atmospheric pressure is investigated. A force-sensitive peel test was carried out and confirmed increased adhesion after plasma treatment.
Zusammenfassung
Die Haftfestigkeit von PVA Leim auf unbehandelten und mit einer dielektrisch behinderten Entladung (DBD) unter Atmosphärendruck plasmabehandelten Faser- und Spanplatten wurde untersucht. Eine erhöhte Haftung durch die Plasmabehandlung wurde mittels eines Peel Tests festgestellt.
Similar content being viewed by others
References
De Meijer M, Militz H (2000) Wet adhesion of low-VOC coatings on wood. A quantitative analysis. Prog Org Coat 38:223–240
Gindl M, Reiterer A, Sinn G, Stanzl-Tschegg SE (2004) Effects of surface ageing on wettability, surface chemistry, and adhesion of wood. Holz Roh- Werkst 62:273–280
Kogelschatz U (2003) Dielectric barrier discharges: Their history, discharge physics, and industrial applications. Plasma Chem Plasma Proc 23:1–46
Wolkenhauer A, Avramidis G, Cai Y, Militz H, Viöl W (2007a) Investigation of wood and timber surface modification by dielectric barrier discharge at atmospheric pressure. Plasma Proc Polym 4:470–474
Wolkenhauer A, Avramidis G, Militz H, Viöl W (2007b) Wood modification by atmospheric pressure plasma treatment. In: Hill CAS, Jones D, Militz H, Ormondroyd GA (eds) The Third European Conference on Wood Modification (ECWM3). BC, Bangor, pp 271-274
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wolkenhauer, A., Militz, H. & Viöl, W. Increased PVA-Glue Adhesion on Particle Board and Fibre Board by Plasma Treatment . Holz Roh Werkst 66, 143–145 (2008). https://doi.org/10.1007/s00107-007-0217-1
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00107-007-0217-1