Abstract
A study has been made of the effects of isothermal annealing on the hardness, the tensile properties and the microstructure of cold-worked Zr3Al (Ll2 type). For material rolled to a true strain of 0.29, complete recrystallization accounts for a recovery of hardness of 65 to 70 pet and for a reduction in yield strength of about 50 pet, independent of tem-perature. Grain growth accounts for further changes. The yield strength Σy obeys the relationship Σy = Σo +k y(-d)-1/2 where Σo andk y are constants andd is the average grain diameter of the fully recrystallized matrix. Recrystallization and grain growth kinetics, respectively, satisfy the expressionsf = 1-exp (-kt n) andd = Kt m wheref is the fraction recrystallized,t is time,k andK are parameters which increase with increasing temperature andm andn are constants.
Similar content being viewed by others
References
E. M. Schulson:J. Nucl. Mater., 1974, vol. 50, p. 127.
J. H. Keeler and J. H. Mallery:Trans. AIME, 1955, vol. 203, p. 394.
M. Pötzschke and K. Schubert:Z. Metallk., 1962, vol. 53, p. 548.
D. J. McPherson and M. Hansen:Trans. ASM, 1954, vol. 46, p. 354.
E. M. Schulson and D. B. Graham:Acta Met., 1976, vol. 24, p. 615.
L. M. Howe, R. M. Rainville, and E. M. Schulson:J. Nucl. Mater., 1974, vol. 50, p. 139.
E. M. Schulson and M. J. Stewart:Met. Trans. B, 1976, vol. 7B, p. 363.
D. J. Cameron and A. E. Unger: Atomic Energy of Canada Report AECL-4662, 1973.
E. V. Murphy:J. Nucl. Mater., 1975, vol. 55, p. 117.
L. G. Bell and D. J. Cameron: Atomic Energy of Canada Report AECL-4660, 1974.
E. M. Schulson and J. A. Roy:J Nucl. Mater., 1976, vol. 60, p. 234.
H. E. Rosinger: Atomic Energy of Canada Report WNRE-274, not for publication, 1975.
E. M. Schulson:J. Nucl. Mater., 1975, vol. 56, p. 38.
J. F. R. Ambler, E. M. Schulson, and G. P. Kiely:ibid, 1974, vol. 50, p. 107.
J. H. van der Kuur and W. E. Parr:Rev. Sci. Instrum., 1976, vol. 47, p. 631.
F. M. C. Besag and R. E. Smallman: Ordered Alloys, B. H. Kear, C. T. Sims, N. S. Stoloff, and J. H. Westbrook, eds., p. 259, Claitor’s Publishing Division, 1970.
A. C. Arko and Y. H. Liu:Met. Trans., 1971, vol. 2, p. 1875.
D.G. Morris, F. M.C.Besag, and R. E. Smallman:ActaMet., 1974, vol.22,p.801.
E. M. Schulson:J. Nucl. Mater., 1975, vol. 57, p. 98.
W. B. Hutchinson, F. M. C. Besag, and C. V. Honess:Acta Met., 1973, vol. 21, p. 1685.
R. W. Cahn:Recrystallization, Grain Growth and Textures, p. 99, ASM, 1966.
R. C. Davies and N. S. Stoloff:Trans. TMS-AIME, 1965, vol. 236, p. 1605.
A. A. Goldenberg and Y. P. Selisskii:Fiz. Metal, Metalloved., 1963, vol. 15, p. 717.
A. E. Vidoz, D. P. Lazarevic, and R. W. Cahn:ActaMet., 1963, vol. 11, p. 17.
Y. P. Selisskii and M. N. Tolochko:Fiz. Metal. Metalloved, 1962, vol. 13, p. 587.
R. W. Cahn:Physical Metallurgy, North-Holland Publishing Co., Amsterdam, 1965
H. Hu and B. B. Rath:Met. Trans., 1970, vol. 1, p. 3181.
H. Goeminne, C. Van Der Perre, T. Hens, and J. Van Der Planken:Acta Met., 1974, vol. 22, p. 725.
J. P. Clark and G. P. Mohanty:Scr. Met., 1974, vol. 8, p. 959.
P. A. Beck:J. Appl. Phys., 1949, vol. 20, p. 633.
R. W. Cahn:Proc. Phys. Soc, 1950, vol. 63A, p. 323.
J. E. Bailey and P. B. Hirsch:Proc. Roy. Soc, 1962, vol. 267A, p. 11.
Author information
Authors and Affiliations
Additional information
Formerly affiliated
Rights and permissions
About this article
Cite this article
Gagné, M., Schulson, E.M. The effects of annealing on cold-worked Zr3Al. Metall Trans A 7, 1775–1783 (1976). https://doi.org/10.1007/BF02817896
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02817896