Abstract
The use of inexpensive biosorbents to sequester heavy metals from aqueous solutions, is one of the most promising technologies being developed to remove these toxic contaminants from wastewaters. Considering this challenge, the viability of Cr(III) and Pb(II) removal from aqueous solutions using a flocculating brewer's yeast residual biomass from a Portuguese brewing industry was studied. The influence of physicochemical factors such as medium pH, biomass concentration and the presence of a co-ion was characterised. Metal uptake kinetics and equilibrium were also analysed, considering different incubation temperatures. For both metals, uptake increased with medium pH, being maximal at 5.0. Optimal biomass concentration for the biosorption process was determined to be 4.5 g dry weight/l. In chromium and lead mixture solutions, competition for yeast binding sites was observed between the two metals, this competition being pH dependent. Yeast biomass showed higher selectivity and uptake capacity to lead. Chromium uptake kinetic was characterised as having a rapid initial step, followed by a slower one. Langmuir model describes well chromium uptake equilibrium. Lead uptake kinetics suggested the presence of mechanisms other than biosorption, possibly including its precipitation.
Similar content being viewed by others
Author information
Authors and Affiliations
Additional information
Received: 10 December 1998
Rights and permissions
About this article
Cite this article
Ferraz, A., Teixeira, J. The use of flocculating brewer's yeast for Cr(III) and Pb(II) removal from residual wastewaters. Bioprocess Engineering 21, 431–437 (1999). https://doi.org/10.1007/PL00009083
Issue Date:
DOI: https://doi.org/10.1007/PL00009083