Abstract
A new form of deformation mechanism map is introduced based on grain size. Maps are developed for pure aluminum at two different homologous temperatures, and the relative contributions of the various deformation processes are estimated as a function of stress at different grain sizes. A simple method of constructing these maps is presented, requiring only a knowledge of the relevant constitutive equations for the various mechanisms and a minimum of calculation.
Similar content being viewed by others
References
J. Weertman:Trans. ASM, 1968, vol. 61, pp. 681–94.
M. F. Ashby:ActaMet., 1972, vol. 20, pp. 887–97.
J. T. A. Roberts and J. C. Voglewede:J. Amer. Ceram. Soc., 1973, vol. 56, pp. 472–75.
J. Weertman:J. Appl. Phys., 1957, vol. 28, pp. 362–64.
J. E. Bird, A. K. Mukherjee, and J. E. Dorn:Quantitative Relation Between Properties and Microstructure, D.G. Brandon and A. Rosen, eds., pp. 255–342, Israel Universities Press, Jerusalem, 1969.
J. Harper and J. E. Dom:Acta Met, 1957, vol. 5, pp. 654–65.
J. G. Harper, L. A. Shepard, and J. E. Dorn:Acta Met., 1958, vol. 6, pp. 509–18.
C. R. Barrett, E. C. Muehleisen, and W. D. Nix:Mater. Sci. Eng., 1972, vol. 10, pp. 3342.
F. A. Mohamed, K. L. Murty, and J. W. Morris, Jr.:Met. Trans., 1973, vol. 4, pp. 935–40.
K. L. Murty, F. A. Mohamed, and J. E. Dom:Acta Met., 1972, vol. 20, pp. 1009–18.
F. A. Mohamed, K. L. Murty, and J. W. Morris, Jr.:Rate Processes in Plastic Deformation, Proc. John E. Dorn Memorial Symposium, Cleveland, Ohio, 1972, in press.
F. R. N. Nabarro:Report of a Conference on Strength of Solids, pp. 75–90, The Physical Society, London, 1948.
C. Herring:J. Appl Phys., 1950, vol. 21, pp. 437–45.
G. B. Gibbs:Mem. Sci. Rev. Met., 1965, vol. 62, pp. 781–86.
J. E. Harris:Met. Sci. J., 1973, vol. 7, pp. 1–6.
B. Burton:Phil. Mag., 1972, vol. 25, pp. 645–59.
R. L. Coble:J. Appl. Phys., 1963, vol. 34, pp. 1679–82.
T. S. Lundy and J. F. Murdock:J. Appl. Phys., 1962, vol. 33, pp. 1671–73.
M. Beyeler and Y. Adda:J. de Physique, 1968, vol. 29, pp. 345–52.
P. M. Sutton:Phys. Rev., 1953, vol. 91, pp. 816–21.
H. J. Frost: Ph.D. Thesis, Division of Engineering and Applied Physics, Harvard University, 1974.
E. C. Muehleisen, C. R. Barrett, and W. D. Nix:Scrip. Met., 1970, vol. 4, pp. 995–99.
R. C. Gifkins:J. Inst. Metals, 1952-53, vol. 81, pp. 417–25.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Mohamed, F.A., Langdon, T.G. Deformation mechanism maps based on grain size. Metall Trans 5, 2339–2345 (1974). https://doi.org/10.1007/BF02644014
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02644014