Abstract
Roads are among the most important assets in the world. Road structure improvements make a crucial contribution to economic development and growth and bring important social benefits. Automation in structural health monitoring allow the accurate prediction of ongoing damage caused by long-term traffic loading. This permits optimal road structure management and ensures the longevity and safety of road structures. This chapter discusses a variety of advanced automation techniques in structural health monitoring of road structures, such as data acquisition, data processing, and life-cycle assessment. It demonstrates that the implementation of automation in road asset management can increase the productivity and extend the service life of road structures, and enhance the durability of crucial road structures and increase transport infrastructure sustainability.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
AASHTO (2013) Manual for bridge element inspection. American association of state highway and transportation officials Washington, DC
Abdel-Qader I, Abudayyeh O, Kelly ME (2003) Analysis of edge-detection techniques for crack identification in bridges. Journal of Computing in Civil Engineering 17:255–263
Abdel-Qader I, Pashaie-Rad S, Abudayyeh O, Yehia S (2006) PCA-based algorithm for unsupervised bridge crack detection. Adv Eng Softw 37:771–778
Adhikari RS, Moselhi O, Bagchi A (2013) A study of image-based element condition index for bridge inspection. In: ISARC. Proceedings of the international symposium on automation and robotics in construction, Vilnius Gediminas Technical University, Department of Construction Economics & Property, 1
Akashi K, Hashimoto K, Koide H, Togawa M (2006) Development of inspection method using infrared ther-mography technology and its technical consideration. In: Proceeding of the JSCE 61st annual meeting, Kusatsu, Japan, pp 1113–1114
Amhaz R, Chambon S, Idier J, Baltazart V (2016) Automatic crack detection on two-dimensional pavement images: an algorithm based on minimal path selection. IEEE Trans Intell Transp Syst 17:2718–2729
ASCE. 2017 infrastructure report card (2017) ASCE Reston, VA
Baidya N, Zhang L, Mendis P, Fragomeni S (2013) Effect of construction sequence in the axial shortening behaviour of composite columns. In: From materials to structures: advancement through innovation. The 22nd Australasian conference on the mechanics of structures and materials, ACMSM 2012, 2013 Sydney, Australia. Taylor & Francis Group, pp 55–59
Bhardwaj S, Mittal A (2012) A survey on various edge detector techniques. Procedia Technology 4:220–226
Bhuvaneswari P, Brindha Therese A (2014) Edge detection techniques in digital and optical image processing. Int J Eng Res Appl, 4(5): 33–37
Biondini F, Frangopol DM (2016) Life-cycle performance of deteriorating structural systems under uncertainty: Review. J Struct Eng 142:1–17
Canny (1986) A computational approach to edge detection. In: IEEE transactions on pattern analysis and machine intelligence, pattern analysis and machine intelligence, p 679
Chaganti VR (2005) Edge detection of noisy images using 2-D discrete wavelet transform. Florida State University
Chang PC, Flatau A, Liu SC (2003) Health monitoring of civil infrastructure. J Struct Health Monitor 2:257–267
Chen H-Y, Chen C (2016) Determining the emissivity and temperature of building materials by infrared thermometer. Constr Build Mater 126:130–137
Davies ER (2005) Machine vision: theory, algorithms, practicalities, 3rd edn. Elsevier, Amsterdam, Boston
Ellenberg A, Kontsos A, Moon F, Bartoli I (2016) Bridge related damage quantification using unmanned aerial vehicle imagery. Struct Control Health Monitor 1168
Ellingwood BR, Mori Y (1993) Probabilistic methods for condition assessment and life prediction of concrete structures in nuclear power plants. Nucl Eng Des 142:155–166
Estes A, Frangopol D (2005) Life cycle evaluation and condition assessment of structures. CRC Press, Handbook of Structural Engineering, Second Edition
Everett TD, Weykamp P, Capers Jr HA, Cox WR, Drda TS, Hummel L, Jensen P, Juntunen DA, Kimball T, Washer GA (2008) Bridge evaluation quality assurance in Europe
Farrar CR, Worden K (2007) An introduction to structural health monitoring. Philos Trans Royal Soc Lond A: Math Phys Eng Sci 365:303–315
FHWA (2013) Status of the Nation’s highways, bridges, and transit: Conditions & performance. Report to Congress
Frangopol DM, Soliman M (2016) Life-cycle of structural systems: recent achievements and future directions. Struct Infrastruct Eng: Maintenance Manag Life-Cycle Des Perform 12:1–20
Fu G (2005) Inspection and monitoring techniques for bridges and civil structures, Elsevier
Fujita Y, Hamamoto Y (2011) A robust automatic crack detection method from noisy concrete surfaces. Mach Vision Appl 22:245–254
German S, Brilakis I, Desroches R (2012) Rapid entropy-based detection and properties measurement of concrete spalling with machine vision for post-earthquake safety assessments. Adv Eng Inform 26:846–858
Gonzalez RC, Woods RE (2008) Digital image processing, 3rd ed. Pearson Prentice Hall, Upper Saddle River, NJ
Gucunski N, Council NR (2013) Nondestructive testing to identify concrete bridge deck deterioration, Transportation Research Board
Guo X, Chen Z (2015) Lifecycle multihazard framework for assessing flood scour and earthquake effects on bridge failure. ASCE-ASME J Risk Uncertainty Eng Syst Part A: Civil Eng 2:C4015004
Hiasa S, Birgul R, Catbas FN (2017) Investigation of effective utilization of infrared thermography (IRT) through advanced finite element modeling. Constr Build Mater 150:295–309
Holst GC (2000) Common sense approach to thermal imaging (90–109). Washington: SPIE Optical Engineering Press
Iervolino I, Giorgio M, Chioccarelli E (2013) Gamma degradation models for earthquake-resistant structures. Struct Saf 45:48–58
Jahanshahi MR, Kelly JS, Masri SF, Sukhatme GS (2009) A survey and evaluation of promising approaches for automatic image-based defect detection of bridge structures. Struct Infrastruct Eng 5:455–486
Junca M, Sanchez-Silva M (2013) Optimal maintenance policy for permanently monitored infrastructure subjected to extreme events. Probabilist Eng Mech 33:1–8
Kafle B, Zhang L, Mendis P, Herath N, Maizuar M, Duffield C, Thompson RG (2017) Monitoring the dynamic behavior of the Merlynston Creek bridge using interferometric radar sensors and finite element modeling. Int J Appl Mech 9:1750003-20
Kim H, Ahn E, Shin M, Sim S-HJSHM (2019) Crack and noncrack classification from concrete surface images using machine learning. 18:725–738
Koch C, Georgieva K, Kasireddy V, Akinci B, Fieguth P (2015) A review on computer vision based defect detection and condition assessment of concrete and asphalt civil infrastructure. Adv Eng Inform 29:196–210
Koh CG, Ang KK, Zhang L (1997) Effects of repeated loading on creep deflection of reinforced concrete beams. Eng Struct 19:2–18
Lee BY, Kim YY, Yi S-T, Kim J-KJS, Engineering I (2013) Automated image processing technique for detecting and analysing concrete surface cracks 9:567–577
Lihai Z, Mendis P, Wong Chon H, Fragomeni S, Nelson L, Yilun S (2013) Effects of cyclic loading on the long-term deflection of prestressed concrete beams. Comput Concr 12:739–754
Lua T, Mendis P, Ngo T, Zhang L, Mohotti D, Sofi M (2014) Blast studies on bridges—a state-of-the-art review. Electr J Struct Eng 14:58–70
Maizuar M, Zhang L, Miramini S, Mendis P, Thompson RG (2017) Detecting structural damage to bridge girders using radar interferometry and computational modelling. Struct Control Health Monitor 24:e1985
Maizuar M, Lumantarna E, Sofi M, Oktavianus Y, Zhang L, Duffield C, Mendis P (2018) Dynamic behaviour of Indonesian bridges using interferometric radar technology. Electr J Struct Eng 18:23–29
Maizuar M, Zhang L, Miramini S, Mendis P, Duffield C (2020) Structural health monitoring of bridges using advanced non-destructive testing technique. In: Wang C, Ho J, Kitipornchai S (eds) Lecture notes in civil engineering. Springer, Singapore
McCann D, Forde M (2001) Review of NDT methods in the assessment of concrete and masonry structures. NDT and E Int 34:71–84
Melchers RE, Li CQ, Lawanwisut W (2008) Probabilistic modeling of structural deterioration of reinforced concrete beams under saline environment corrosion. Struct Saf 30:447–460
Metni N, Hamel T (2007) A UAV for bridge inspection: visual servoing control law with orientation limits. Autom Constr 17:3–10
Moon HG, Kim JH (2011) Intelligent crack detecting algorithm on the concrete crack image using neural network. In: Proceedings of the 28th ISARC, pp 1461–1467
Moore M, Phares BM, Graybeal B, Rolander D, Washer G (2001) Reliability of visual inspection for highway bridges, vol I
NEXCO-WEST (2014) Manual for maintenance of road structures. West Nippon Expressway Company Limited, Osaka, Japan
Nishikawa T, Yoshida J, Sugiyama T, Fujino Y (2012) Concrete crack detection by multiple sequential image filtering. Comp-Aided Civil Infracstruct Eng 27:29–47
Oliveira H, Correia PL (2008) Identifying and retrieving distress images from road pavement surveys. In: 2008 15th IEEE international conference on image processing IEEE, pp 57–60
Omar T, Nehdi ML, Zayed T (2018) Infrared thermography model for automated detection of delamination in RC bridge decks. Constr Build Mater 168:313–327
Pan N-F, Lin T-C, Pan N-H (2009) Estimating bridge performance based on a matrix-driven fuzzy linear regression model. Autom Constr 18:578–586
Prasanna P, Dana K, Gucunski N, Basily B (2012) Computer-vision based crack detection and analysis. In: Sensors and smart structures technologies for civil, mechanical, and aerospace systems 2012, International society for optics and photonics, p 834542.
Preston N (2017) Navigation goes hi-tech. MHD Supply Chain Sol 46
Rackwitz R, Lentz A, Faber M (2005) Socio-economically sustainable civil engineering infrastructures by optimization. Struct Saf 27:187–229
Rashidi M, Lemass BP (2011) A decision support methodology for remediation planning of concrete bridges. J Constr Eng Proj Manag 1(2):1–10
Rehman SKU, Ibrahim Z, Memon SA, Jameel M (2016) Nondestructive test methods for concrete bridges: a review. Constr Build Mater 107:58–86
Riascos-Ochoa J, Sanchez-Silva M, Akhavan-Tabatabaei R (2014) Reliability analysis of shock-based deterioration using phase-type distributions. Probabilist Eng Mech 38:88–101
Robert M (1982) Science behind thermography-thermal infrared sensing for diagnostics and control. J Thermosense, 371:2–9
Ryall MJ (2001) Bridge management, Elsevier
Sanchez-Silva M, Klutke G-A, Rosowsky DV (2011) Life-cycle performance of structures subject to multiple deterioration mechanisms. Struct Saf 33:206–217
Sánchez-Silva M, Klutke GA (2016) Reliability and life-cycle analysis of deteriorating systems. Springer
Sánchez-Silva M, Rackwitz R (2004) Socioeconomic implications of life quality index in design of optimum structures to withstand earthquakes. J Struct Eng 130:969–977
Sánchez-Silva M, Frangopol DM, Padgett J, Soliman M (2016) Maintenance and operation of infrastructure systems: review. J Struct Eng 142:1–16
Sofi M, Zhang L, Mendis P, Baweja D (2011) Early age concrete creep: Using model B3 prediction. In: Incorporating sustainable practice in mechanics of structures and materials the 21st Australian conference on the mechanics of structures and materials. Taylor & Francis Group, pp 267–272
Sonnenberg A (2012) Australian bridge inspection processes. In: 5th Australian small bridges conference, Surfers Paradise, Queensland, Australia
Sonnenberg A (2014) In: 5th Australian Small Bridges Conference. Surfers Paradise, Queensland, Australia
Stein SM, Young GK, Trent RE, Pearson DR (1999) Prioritizing scour vulnerable bridges using risk. J Infrastruct Syst 5:95–101
Tsai Y-C, Kaul V, Mersereau RM (2010) Critical assessment of pavement distress segmentation methods. J Transp Eng 11
Vicroads (2014) Road structure inspection manual. https://www.vicroads.vic.gov.au
Vines G (2008) National trust study of Victoria’s concrete road bridges. Thematic History and Analysis, report to National Trust of Australia (Victoria).(revised 2010)
Wang H, Huang H, Feng Y, Zhang D (2018) Characterization of crack and leakage defects of concrete linings of road tunnels in China. ASCE-ASME J Risk Uncertainty Eng Syst Part A Civil Eng 4:04018041
Washer G, Fenwick R, Bolleni N, Harper J (2009) Effects of environmental variables on infrared imaging of subsurface features of concrete bridges. Transp Res Rec: J Transp Res Board 107–114
Yamaguchi T, Hashimoto S (2010) Fast crack detection method for large-size concrete surface images using percolation-based image processing. Mach Vis Appl 21:797–809
Yamaguchi T, Nakamura S, Saegusa R, Hashimoto S (2008) Image-based crack detection for real concrete surfaces. IEEJ Trans Electr Electron Eng 3:128–135
Yang Y, Klutke G-A (2000) Improved inspection schemes for deteriorating equipment. Probab Eng Inform Sc 14:445
Yehia S, Abudayyeh O, Nabulsi S, Abdelqader IJJOBE (2007) Detection of common defects in concrete bridge decks using nondestructive evaluation techniques. 12:215–225
Zhang L, Mendis P, Hon WC, Fragomeni S, Lam N, Song Y (2013) Effects of cyclic loading on the long-term deflection of prestressed concrete beams. Comput Concrete 12:377–392
Zhang L, Maizuar M, Mendis P, Duffield C, Thompson R (2016a) Monitoring the dynamic behaviour of concrete bridges using non-contact sensors (IBIS-S). Appl Mech Mater 846: 225–230
Zhang L, Yang F, Zhang YD, Zhu YJ (2016b) Road crack detection using deep convolutional neural network. In 2016 IEEE international conference on image processing (ICIP). IEEE, pp 3708–3712
Zhang L, Xu W, Zhu L, Yuan X, Zhang C (2019) Study on pavement defect detection based on image processing utilizing UAV. J Phys: Conf Ser. IOP Publishing, p 042011
Zou Q, Cao Y, Li Q, Mao Q, Wang S (2012) CrackTree: automatic crack detection from pavement images. Pattern Recongn Lett 33:227–238
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Zhang, L., Herath, N., Raja, B.N.K., Chen, S., Miramini, S., Duffield, C. (2021). Automation in Structural Health Monitoring of Transport Infrastructure. In: Wang, B.T., Wang, C.M. (eds) Automating Cities. Advances in 21st Century Human Settlements. Springer, Singapore. https://doi.org/10.1007/978-981-15-8670-5_6
Download citation
DOI: https://doi.org/10.1007/978-981-15-8670-5_6
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-8669-9
Online ISBN: 978-981-15-8670-5
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)