Abstract
Distributed electric propulsion is a new concept in recent years. It makes full use of the scale-free nature of electric energy and distributes multiple propulsion devices on the wings or fuselage to improve the aerodynamic performance of aircraft. This study will analysis the effect of distributed propellers slipstream on aerodynamic characteristics of the wing. The study will analysis the propeller-wing system by means of momentum theory, actuator disk model and CFD method to explore the high-lift mechanism of the distributed propeller slipstream. Based on the momentum theory, a method to analyze the lift coefficient of the wing is proposed by using the velocity of the slipstream behind the propellers. Based on the actuator disk model, the influence of different number of propellers on the lift coefficient and lift coefficient distribution of the wing was investigated by OpenVSP. Based on CFD method, calculation and simulation were carried out through Fluent, and k-omega SST model was used to analyze the interaction of the propeller-wing system. The research results show that the distributed propeller slipstream will not only increase the airflow speed over the wing, the rotation of the slipstream also has a great influence on the wing. In addition, the smooth flow of wingtip vortex offset also has great effect on aerodynamic characteristics of the wing.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Kuchemann D (1989) The aircraft aerodynamic design. In: Leng Y, Wu J, Du J, et al National defense industry press, pp 176–177. (in Chinese)
Schetz JA, Hosder S, Dippold V III et al (2010) Propulsion evaluation of jet-wing distributed propulsion. Aerosp Sci Technol 14(1):1–10
Rankine WJM (1865) On the mechanical principles of the action of propellers. Trans Inst Naval Architect 6:13–39
Froude RE (1889) On the part played in propulsion by differences of fluid pressure. Trans Inst Naval Architect 30:390–405
Liu P (2005) Air propeller theory and its application. Beijing University of aeronautics and astronautics press, pp 56–59. (in Chinese)
Stoll AM, Bevirt J, Pei PP, et al (2014) Conceptual design of the Joby S2 electric VTOL PAV. In: 14th AIAA aviation technology, integration, and operations conference. AIAA 2014-2407
Chaput AJ, Akay E, Rizo-Patron S (2011) Vehicle sketch pad (VSP) structural layout tool. In: 49th AIAA aerospace sciences meeting including the new horizons forum and aerospace exposition. AIAA 2011-357
Ordaz I (2011) Conversion of component-based point definition to VSP model and higher order meshing. In: 49th AIAA aerospace sciences meeting including the new horizons forum and aerospace exposition. AIAA 2011-358
Chaput, AJ, Kulkarni T, Brown S, et al (2013) Vehicle sketch pad structural analysis module capability update. In: 51st AIAA aerospace sciences meeting including the new horizons forum and aerospace exposition. AIAA 2013-223
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Zhao, S., Xu, D. (2019). Effects of Distributed Propellers Slipstream on Aerodynamic Characteristics of Wing. In: Zhang, X. (eds) The Proceedings of the 2018 Asia-Pacific International Symposium on Aerospace Technology (APISAT 2018). APISAT 2018. Lecture Notes in Electrical Engineering, vol 459. Springer, Singapore. https://doi.org/10.1007/978-981-13-3305-7_21
Download citation
DOI: https://doi.org/10.1007/978-981-13-3305-7_21
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-13-3304-0
Online ISBN: 978-981-13-3305-7
eBook Packages: EngineeringEngineering (R0)