Abstract
Nowadays, application of precast constructions is increasing, due to benefit of the industrialized building systems, specially the performance of this type of construction structures when effects of dynamic loads are considered. Precast beam column connection is mostly the critical part in the structures to resist the loads, so that the attention must be paid while designing such connections. Therefore, the aim of this study is to evaluate the efficiency of the precast concrete beam–column connection comparing with the conventional joints. Three-dimensional nonlinear analysis was conducted using finite element method with five beam–column connections under the effect of cyclic load, bearing pad, steel dowel, and steel angle cleat were used to improve the connections performance. The results indicated that the using of steel angle cleat and dowel together and doubling angle cleat have improved the lateral resistance of the precast connections as well as the lateral stiffness and the ability to dissipate damage energy when comparing with the conventional joint performance.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Aninthaneni, P.K., Dhakal, R.P.: Conceptual development: low loss precast concrete frame building system with steel connections. In NZSEE Conference (2014)
Babu, V.R., Nakulesh, B., Siddhartha, P., Rao, A.V., Kumar, B.C.: Study on prefabricated concrete beam and column connections. Int. J. Appl. Sci. Eng. Manag. 2(2), 41–45 (2013)
Banisheikholeslami, A., Behnamfar, F., Ghandil, M.: A beam-to-column connection with visco-elastic and hysteretic dampers for seismic damage control. J. Constr. Steel Res. 117, 185–195 (2016). https://doi.org/10.1016/j.jcsr.2015.10.016
Bedirhanoglu, I., Ilki, A., Kumbasar, N.: Precast fiber reinforced cementitious composites for seismic retrofit of deficient RC joints—a pilot study. Eng. Struct. 52, 192–206 (2013). https://doi.org/10.1016/j.engstruct.2013.02.020
Chidambaram, R.S., Agarwal, P.: Seismic behavior of hybrid fiber reinforced cementitious composite beam-column joints. Mater. Des. 86, 771–781 (2015). https://doi.org/10.1016/j.matdes.2015.07.164
Choi, H.K., Choi, Y.C., Choi, C.S.: Development and testing of precast concrete beam-to-column connections. Eng. Struct. 56, 1820–1835 (2013). https://doi.org/10.1016/j.engstruct.2013.07.021
Crisafulli, F.J., Restrepo, J.I.: Ductile steel connections for seismic resistant precast buildings. J. Earthq. Eng. 7(4), 541–553 (2003). https://doi.org/10.1080/13632460309350463
Ercolino, M., Magliulo, G., Manfredi, G.: Failure of a precast RC building due to Emilia-Romagna earthquakes. Eng. Struct. 118, 262–273 (2016). https://doi.org/10.1016/j.engstruct.2016.03.054
Hawileh, R.A., Rahman, A., Tabatabai, H.: Nonlinear finite element analysis and modeling of a precast hybrid beam-column connection subjected to cyclic loads. Appl. Math. Model. 34(9), 2562–2583 (2010). https://doi.org/10.1016/j.apm.2009.11.020
Leong, D.C.P.: Behaviour of pinned beam-to-column connections for precast concrete frames (2006)
Luk, S.H., Kuang, J.S.: Seismic behaviour of RC exterior wide beam-column joints. In 15th World Conference on Earthquake Engineering (2012)
Magliulo, G., Ercolino, M., Cimmino, M., Capozzi, V., Manfredi, G.: FEM analysis of the strength of RC beam-to-column dowel connections under monotonic actions. Constr. Build. Mater. 69, 271–284 (2014). https://doi.org/10.1016/j.conbuildmat.2014.07.036
Maya, L.F., Zanuy, C., Albajar, L., Lopez, C., Portabella, J.: Experimental assessment of connections for precast concrete frames using ultra high performance fibre reinforced concrete. Constr. Build. Mater. 48, 173–186 (2013). https://doi.org/10.1016/j.conbuildmat.2013.07.002
Oinam, R.M., Sahoo, D.R., Sindhu, R.: Cyclic response of non-ductile RC frame with steel fibers at beam-column joints and plastic hinge regions. J. Earthq. Eng. 18(6), 908–928 (2014). https://doi.org/10.1080/13632469.2014.916239
Precast concrete frames guide: Dublin, Ireland: Irish Precast Concrete Association. Precast concrete Irish Precast Concrete Association Unit 8, Newlands Business Park, Clondalkin, Dublin 22 (2003)
Psycharis, I.N., Mouzakis, H.P.: Shear resistance of pinned connections of precast members to monotonic and cyclic loading. Eng. Struct. 41, 413–427 (2012). https://doi.org/10.1016/j.engstruct.2012.03.051
Vidjeapriya, R., Vasanthalakshmi, V., Jaya, K.P.: Performance of exterior precast concrete beam-column dowel connections under cyclic loading. Int. J. Civil Eng. 12(1 A), 82–94 (2014)
Wahjudi, D.I., Suprobo, P., Sugihardjo, H.: Behavior of precast concrete beam-to-column connection with U-and L-bent bar anchorages placed outside the column panel-experimental study. Proc. Eng. 95, 122–131 (2014). https://doi.org/10.1016/j.proeng.2014.12.171
Yuksel, E., Karadogan, H.F., Bal, İ.E., Ilki, A., Bal, A., Inci, P.: Seismic behavior of two exterior beam-column connections made of normal-strength concrete developed for precast construction. Eng. Struct. 99, 157–172 (2015). https://doi.org/10.1016/j.engstruct.2015.04.044
Zoubek, B., Isakovic, T., Fahjan, Y., Fischinger, M.: Cyclic failure analysis of the beam-to-column dowel connections in precast industrial buildings. Eng. Struct. 52, 179–191 (2013)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Sadeq, I., Hejazi, F., Jabbar, S. (2019). Performance of Various Connection System for IBS Structure Subjected to Cyclic Load. In: Pradhan, B. (eds) GCEC 2017. GCEC 2017. Lecture Notes in Civil Engineering , vol 9. Springer, Singapore. https://doi.org/10.1007/978-981-10-8016-6_43
Download citation
DOI: https://doi.org/10.1007/978-981-10-8016-6_43
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-8015-9
Online ISBN: 978-981-10-8016-6
eBook Packages: EngineeringEngineering (R0)