Abstract
Thermal straightening is a widely used process for dealing with undesired distortion. Flame heating and induction heating are the traditional heating processes used in industry. However, these two heating processes have an insignificant effect on vertical steel plates. This study compared the thermal deformation caused by induction heating with the thermal deformation caused by arc heating and laser beam heating which have greater heat input. The thermal deformations induced by these three processes were simulated by established heat source models, and simulated results were compared with experimental results to confirm the model’s accuracy. With investigating the mechanism of thermal deformation with the finite element method it was found that the thermal deformation have a significant relationship with the amount of central zone plastic deformation.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Park JU, Park SC, Lee CH (2009) Control of longitudinal bending distortion of built-up beams by high-frequency induction heating. Weld J 88:29–34
Radaj D (2012) Heat effects of welding: temperature field, residual stress, distortion. Springer Science & Business Media, Berlin
Tsirkas SA, Papanikos P, Kermanidis Th (2003) Numerical simulation of the laser welding process in butt-joint specimens. J Mater Process Technol 134(1):59–69
Moraitis GA, Labeas GN (2009) Prediction of residual stresses and distortions due to laser beam welding of butt joints in pressure vessels. Int J Press Vessels Pip 86(2–3):133–142
Wang J, Yuan H, Ma N, Murakawa H (2016) Recent research on welding distortion prediction in thin plate fabrication by means of elastic FE computation. Mar Struct 47:42–59
Goldak J, Chakravarti A, Bibby M (1984) A new finite element model for welding heat sources. Metall Trans B 15(2):299–305
Azar AS, Ås SK, Akselsen OM (2012) Determination of welding heat source parameters from actual bead shape. Comput Mater Sci 54:176–182
Xia H, Li L, Ma N, Huang H (2016) Analysis of influence of initial gap of laser-arc hybrid butt welds on inherent strain and welding deformation of a pipe structure. J Laser Appl 28(2):022009
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Yao, T., Guo, L., Wang, C. (2018). Thermal Deformation of a Vertical Plate According to Various Plastic Deformation Regions. In: Wang, K., Wang, Y., Strandhagen, J., Yu, T. (eds) Advanced Manufacturing and Automation VII. IWAMA 2017. Lecture Notes in Electrical Engineering, vol 451. Springer, Singapore. https://doi.org/10.1007/978-981-10-5768-7_32
Download citation
DOI: https://doi.org/10.1007/978-981-10-5768-7_32
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-5767-0
Online ISBN: 978-981-10-5768-7
eBook Packages: EngineeringEngineering (R0)