1 Setup of Rotating Regenerator Systems
The previous section dealt with regenerators with non-moving heat storage media, where hot and cold gas alternately flow through the static regenerator. The outlet temperatures of both media vary during the operation (during the heating and cooling phases). For a continuous operation, two parallel devices are required. Each of the devices is passed through by the hot and the cold gas flux alternately.
The regenerators with moving heat storage medium, considered in this section, show a relative movement of the heat storage medium in relation to the gas fluxes. The first type of these regenerators consists of a rotating heat storage medium, while the inlet of the hot and cold gas is static (Ljungström system, see Fig. 1). The second type consists of a static heat storage medium while the gas inlet and outlet distributors rotate synchronously (Rothemühle system).
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
8 Bibliography
Hausen H (1976) Wärmeübertragung im Gegenstrom, Gleichstrom und Kreuzstrom. 2. Aufl. Springer-Verlag, Berlin
Allgäuer G, Dietrich K (2000) Regenerative Wärmetauscher zur Luftvorwärmung und zur Wiederaufheizung von Abgasen: Luvo, REA- und DENOX-Gavo. In: Podhorky M, Krips H (eds) Vulkan-Verlag, Wärmetauscher, pp 436–451
Company Brochure ABB Abgastechnik
Company Brochure Kraftanlagen Heidelberg, now ABB-Abgastechnik
Kumpf T (1992) Untersuchung von Wärme-/ Stoffübergang, Druckverlust und Strömungsvorgänge in Regeneratorstrukturen, Diplomarbeit. Institut für Chemische Verfahrenstechnik, Universität Stuttgart
Company Brochure GEA-Rototherm
Beckert J, Dehli F (1973) Hygienische Beurteilung regenerativer Wärmeaustauscher. HLH 24(2):55–58
Dehli F (1970) Übertragungsrate zwischen Fortluft und Außenluft bei Regenerativ-Wärmeaustauschern zur Wärmerückgewinnung. HLH 21(7):235–238
Desicool-Adsorptionskühlung, Company Brochure Fa. Munters
Nußelt W (1927) Die Theorie des Winderhitzers. VDI-Z 71:85–91
Nußelt W (1928) Der Beharrungszustand des Winderhitzers. VDI-Z 72:1052–1054
Hausen H (1929) Über die Theorie des Wärmeaustausches in Regeneratoren. Z Angew Math Mechan 9:173–200
Hausen H (1931) Näherungsverfahren zur Berechnung des Wärmeaustausches in Regeneratoren. Z Angew Math Mechan 11(2):105–114
Hausen H (1942) Vervollständigte Berechnung des Wärmeaustausches in Regeneratoren. VDI-Beiheft “Verfahrenstechnik” 2:31–43
Willmott AJ (1964) Digital computer simulation of a thermal regenerator. Int J Heat Mass Trans 7:1291–1303
Willmott AJ (1968) Simulation of a thermal regenerator under conditions of variable mass flow. Int J Heat Mass Trans 11:1105–1116
Vortmeyer D, Le Mong S (1976) Anwendung des Äquivalenzprinzipes zwischen Ein- und Zweiphasenmodellen auf die Lösung der Regeneratorgleichungen. Wärme und Stoffübertragung 9:29–37
Hausen H (1964) Berechnung der Wärmeübertragung in Regeneratoren bei temperaturabhängigen Stoffwerten und Wärmeübergangszahlen. Int J Heat Mass Trans 7:112–123
Hausen H (1970) Berechnung der Wärmeübertragung bei zeitlich veränderlichem Mengenstrom. Int J Heat Mass Trans 7:1753–1766
Kuhn P, Sucker D (1984) Anwendung eines neuen mathematischen Modells zur Ermittlung der energetisch günstigsten Betriebsweise von Winderhitzern. Stahl und Eisen 104(11):545–550
Bahnke GD, Howard CP (1964) The effect of longitudinal heat conduction on periodic flow heat exchanger perfomance. Trans ASME, J Engng Pwr 86:105–120
Hausen H (1937) Feuchtigkeitsablagerungen in Regeneratoren. Z VDI-Beiheft Verfahrenstechnik 2:62–67
Kruse H, Vauth R (1976) Betriebsgrenzen und Übertragungsverhalten im Winter von Regenerativ-Wärmetauschern mit metallischer Speichermasse. HLH 27(4):114–121
Vauth D (1979) Wärme- und Stoffaustausch in Regenerativ-Wärmeaustauschern mit nicht-absorbierenden Speichermassen. Dissertation, Universität Hannover
Holmberg RB (1977) Heat and mass transfer in rotary heat exchangers with nonhygroscopic rotor materials. Trans ASME 99:196–202
van Leersum JG, vanBanks PJ (1977) Equilibrium heat and mass transfer in regenerators in which condensation occurs. Int J Heat Mass Trans 20:927–934
Klein H (1988) Heat and mass transfer in regenerative enthalpy exchangers. MSc thesis, University of Wisconsin, Madison
Frauhammer J, Klein H, Eigenberger G, Nowak U (1998) Solving moving boundary problems with an adaptive moving grid method: rotary heat exchangers with condensation and evaporation. Chem Eng Sci 53(19):3393–3411
Spahn H, Gnielinski V (1971) Wärme- und Stoffaustausch in einem Sorptionsregenerator. Verfahrenstechnik 5(4):143–149
Maclaine-Cross IL, Banks PJ (1972) Coupled heat and mass transfer in regenerators – prediction using an analogy with heat transfer. Int J Heat Mass Trans 15:1225–1242
Holmberg RB (1979) Heat and mass transfer in rotary heat exchangers with hygroscopic rotor materials. Trans ASME 101(5):205–210
Gutermuth W (1980) Untersuchung der gekoppelten Wärme- und Stoffübertragung in Sorptionsregeneratoren. Dissertation, Technische Hochschule Darmstadt
Martin H (1988) Thieme Verlag, Wärmeübertrager
Shah RK, London AL (1978) Laminar flow forced convection in ducts. Academic Press, New York.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2010 Springer-Verlag
About this entry
Cite this entry
Gaiser, G. (2010). N2 Combined Heat and Mass Transfer in Rotating Regenerators. In: VDI Heat Atlas. VDI-Buch. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-77877-6_105
Download citation
DOI: https://doi.org/10.1007/978-3-540-77877-6_105
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-77876-9
Online ISBN: 978-3-540-77877-6
eBook Packages: EngineeringReference Module Computer Science and Engineering