Abstract
As part of the study of compensation methods for the main sources of error in measuring systems that use a digital camera equipped with an entocetric fixed focal lens as a recording device for measuring information, a method is proposed to improve the accuracy of determining the main shaping dimensions of axisymmetric products of transport engineering, due to position control test object when calibrating the system. A design scheme and measurement ratios for determining the angular position of the test object are presented. The article presents the results of experimental studies, confirming the significance of the considered source of error for measurements with an accuracy of more than 0.1% and showing the possibility of determining the position of the test object with an error of less than 0.2%. The paper provides recommendations for the implementation of the considered methodology. The proposed method can be used both to correct the position of the test object before calibration and to introduce corrections to the measurement result.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Gavrilin, L.M., Sotnikov V.I., Skhirtladze, A.G., Kharlamov, G.L.: Machine-tool equipment of machine-building industries: a textbook for universities: in 2 h StaryOskol: TNT. Part I 416 p. (2012)
Khalimonenko, A.D., Pompeev, K.P., Timofeev, D.Y.: Method of calculating intermediate diametral sizes and allowances for designing technology of manufacture of details. AERAdv. Eng. Res. 133(1), 312–317 (2017)
Khalimonenko, A.D., Timofeev, D.Y., Pompeev, K.P.: Dimensional analysis of the manufacturing processes of axisymmetric parts. IOP Conf. Ser.: Mater. Sci. Eng. 560(1), 12144–12144 (2019)
Solomentsev, Yu.M., Basin, A.M.: Technique of optimization of the technological process of processing parts on machine tools. Vestnik Mech. Eng. 6, 62–66 (1974)
Rubashkin, I.B., Aleshin, A.A.: Microprocessor control of metal working regime 160 p. Mechanical Engineering. Leningrad. department (1989)
Andreev, A.A., Shevchenko, V.V.: An adaptive control system for the processing of instrument parts in automated production, Modern scientific research and innovations, 6, Part 1 (2015)
Maksarov, V.V., Olt, J.: Dynamic stabilization of machining process based on local metastability in controlled robotic systems of CNC machines. J. Mining Inst. 226, 446–451 (2017)
Adaptive machining from Delcamplc as the integration of machining and precision control of product manufacturing.: https://sapr.ru/article/19015, Last Accessed 31 Aug 2020
Sensors and software for machine tools.: https://www.renishaw.ru/ru/machine-tool-probes-and-software--6073, Last Accessed 17 Jan 2021
Potapov, A.I., Makhov, V.E., Smorodinskii, Y.G., Manevich, E.Y.: Smart-camera-based linear sizing. Russian J. Nondestruct. Test. 55(7), 524–532 (2019)
Optical measurement [Electronic resource].: https://www.vicivision.com/optical-measuring-machines-for-turned-parts, Last Accessed 31 Aug 2020
Zhidelev, S.: A new look at the control of bodies of revolution. VECTOR High Technol. 7(20), 34–38 (2015)
Optical micrometers [Electronic resource].: https://riftek.com/ru/products/~show/sensors/optical-micrometers, Last Accessed 31 Aug 2020
Soroka, M.: Telecentric optics: improving the accuracy of optimal instrumentation. Control Eng. Russia 4(64), 100–102 (2016)
Brown, D.C.: Close-range camera calibration. Photogramm. Eng. 37(8), 855–866 (1971)
Levina, A.I., Dubgorn, A.S., Iliashenko, O.Y.: Internet of things within the service architecture of intelligent transport systems. In: Proceedings—2017 European Conference on Electrical Engineering and Computer Science, EECS 2017, pp. 351–355 (2018). https://doi.org/10.1109/EECS.2017.72
Zhang, Z.: A flexible new technique for camera calibration. IEEE Trans. Pattern Anal. Mach. Intell. 22(11), 1330–1334 (2000)
Liu, Z., Qun, Wu., Chen, Xu., Yin, Y.: High-accuracy calibration of low-cost camera using image disturbance factor. Opt. Express 24(21), 24321–24336 (2016)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Kulchitskiy, A., Zubareva, A. (2022). Reduction of Measurement Error of Axisymmetric Parts with an Optical System. In: Beskopylny, A., Shamtsyan, M. (eds) XIV International Scientific Conference “INTERAGROMASH 2021". Lecture Notes in Networks and Systems, vol 246. Springer, Cham. https://doi.org/10.1007/978-3-030-81619-3_88
Download citation
DOI: https://doi.org/10.1007/978-3-030-81619-3_88
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-81618-6
Online ISBN: 978-3-030-81619-3
eBook Packages: EngineeringEngineering (R0)