Abstract
High Speed Machining (HSM) is a new technology used to reduce the time and cost of producing parts in several sectors. Among the main components of the HSM is the spindle. It is usually supported by Active Magnetic Bearings (AMBs), in order to achieve high speeds without affecting the dynamic characteristics of the machine. In this paper, an electromagnetic spindle supported by two AMBs is modeled and simulated using the interval calculation technique in order to assure successfully the preliminary design process. The behavior of the system is evaluated and studied with the consideration of uncertainty. The uncertainties are taken into account for the different design parameters that define the dynamic model of the spindle.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Auchet S, Chevrier P, Lacour M, Lipinski P (2004) A new method of cutting force measurement based on command voltages of active electro-magnetic bearings. Int J Mach Tools Manuf 44:1441–1449. https://doi.org/10.1016/j.ijmachtools.2004.05.009
Bouaziz S, Messaoud NB, Mataar M, Fakhfakh T, Haddar M (2011) A theoretical model for analyzing the dynamic behavior of a misaligned rotor with active magnetic bearings. Mechatronics 21:899–907. https://doi.org/10.1016/j.mechatronics.2011.05.001
Chen M, Knospe CR (2007) Control approaches to the suppression of machining chatter using active magnetic bearings. IEEE Trans Control Syst Technol 15:220–232. https://doi.org/10.1109/TCST.2006.886419
Chiba A, Fukao T, Ichikawa O, Oshima M, Takemoto M, Dorrell D (2005) Magnetic bearings and bearingless drives. Elsevier. https://doi.org/10.1016/b978-0-7506-5727-3.x5000-7
Faroughi S, Lee J (2015) Analysis of tensegrity structures subject to dynamic loading using a Newmark approach. J Building Eng 2:1–8. https://doi.org/10.1016/j.jobe.2015.03.005
Gourc E, Seguy S, Arnaud L (2011) Chatter milling modeling of magnetic bearing spindle in high speed domain. Int J Mach Tools Manuf 51:928–936. https://doi.org/10.1016/j.ijmachtools.2011.08.008
Gościniak I, Gdawiec K (2019) Control of dynamics of the modified Newton-Raphson algorithm. Commun Nonlinear Sci Numer Simul 67:76–99. https://doi.org/10.1016/j.cnsns.2018.07.010
Hentati T, Bouaziz A, Bouaziz S, Choley JY, Haddar M (2013) Dynamic behaviour of active magnetic bearings spindle in high-speed domain. Int J Mechatron Manuf Syst 6:474–492. https://doi.org/10.1504/IJMMS.2013.058527
Kimman MH, Langen HH, Munning Schmidt RH (2010) A miniature milling spindle with active magnetic bearings. Mechatronics 20:224–235. https://doi.org/10.1016/j.mechatronics.2009.11.010
Knospe CR (2007) Active magnetic bearings for machining applications. Control Eng Prac 15:307–313. https://doi.org/10.1016/j.conengprac.2005.12.002
Kyung JH, Lee CW (2003) Controller design for a magnetically suspended milling spindle based on chatter stability analysis. JSME Int J Ser C-Mech Syst Mach Elem Manuf Jpn Soc Mech Eng 46:416–422. https://doi.org/10.1299/jsmec.46.416
Sawicki JT, Maslen EH, Biscof KR (2007) Modeling and performance evaluation of machining spindle with active magnetic bearing. J Mech Sci Technol 21:847–850. https://doi.org/10.1007/BF03027055
Schweitzer G, Bleuler H, Cole M, Keogh P, Larsonneur R, Malsen E, Nordmann R, Okada Y, Traxler A (2009) Magnetic bearings: theory, design, and application to rotating machinery. Springer. https://doi.org/10.1007/978-3-642-00497-1
Trabelsi H, Guizani A, Tounsi D, Hammadi M, Barkallah M, Haddar M (2019) Consideration of uncertainties in the preliminary design case of an electromagnetic spindle. J Theor Appl Mech 57:821–832. https://doi.org/10.15632/jtam-pl/111913
Tsai NC, Lee RM (2011) Regulation of spindle position by magnetic actuator array. Int J Adv Manuf Technol 53:93–104. https://doi.org/10.1007/s00170-010-2830-0
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Guizani, A., Trabelsi, H., Barkallah, M., Hammadi, M., Choley, J.Y., Haddar, M. (2020). Dimensioning of an Electromagnetic Spindle with Interval Computation Technique. In: Barkallah, M., Choley, JY., Louati, J., Ayadi, O., Chaari, F., Haddar, M. (eds) Mechatronics 4.0. MECHATRONICS 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-46729-6_7
Download citation
DOI: https://doi.org/10.1007/978-3-030-46729-6_7
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-46728-9
Online ISBN: 978-3-030-46729-6
eBook Packages: EngineeringEngineering (R0)