Abstract
Powders exhibit several kinds of bulk properties such as mechanical, thermal, electrical, magnetic, optical, acoustic, and surface physico-chemical properties. Among these, the rheological property of particles is widely investigated in the applied fields. It is closely related not only to the material properties of a single particle but also to the unit operations in powder technology. Included here are the most fundamental characteristics of deformation and flow of particulate solids, that is, packing, permeability and strength, mainly in the dry system. Thus, the bulk properties are essential for describing various rheological behaviors in powder handling processes, and constitute one of the current topics in the field of particle science.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
D. P. Haughey and G. S. G. Beveridge, Can. J. Chem. Eng. 47:130 (1969).
K. Kubo, E. Suito, Y. Nakagawa, and S. Hayakawa, Powder-Theory and Application, Maruzen, Tokyo, p. 208 (1962).
L. C. Graton and H. J. Fraser, J. Geol. 44:785 (1935).
T. Uematsu, K. Tsuchiya, and S. Okamura, J. Mech. Eng. Jpn. 17:12 (1951).
E. Manegold, R. Hofmann, and K. Solf, Kolloid Z. 56:142 (1931).
H. T. Horsfield, J. Soc. Ind. 53:108 (1934).
H. E. White and S. F. Walton, J. Am. Ceramic Soc. 20:155 (1937).
D. R. Hudson, J. Appl. Phys. 20:154 (1949).
A. E. R. Westman and H. R. Hugill, J. Am. Ceramic Soc. 13:767 (1930).
J. C. Macrae and W. A. Gray, Br. J. Appl. Phys. 22:164 (1961).
G. D. Scott, Nature 188:908 (1960).
T. G. Owe Berg, R. L. McDonald, and R. J. Trainor, Jr., Powder Technol. 3:183 (1969-1970).
W. O. Smith, P. D. Foote, and P. F. Busang, Phys. Rev. 34:1271 (1929).
W. O. Smith, Physics 4:425 (1933).
M. Suzuki, K. Makino, T. Tamamura, and K. Iinoya, Kagaku Kogaku Ronbunshu 5:616 (1979).
K. Gotoh, J. Soc. Powder Technol. Jpn., 16:709 (1979).
R. K. McGeary, J. Am. Ceramic Soc. 44:513 (1961).
M. Leva and M. Grummer, Ind. Eng. Chem. 40:415 (1948).
K. Ridgway and K. J. Tarbuck, Br. Chem. Eng. 12:384 (1967).
D. P. Haughey and G. G. Beveridge, Chem. Eng. Sci. 21:905 (1966).
J. D. Bernai and J. Mason, Nature 188:910 (1960).
L. H. S. Roblee and J. W. Tierney, AIChE J. 4:460 (1958).
R. F. Benenati and C. B. Brosilow, AIChE J. 8:359 (1962).
M. C. Thadani and F. N. Peebles, Ind. Eng. Chem. Proc. Des. Dev. 5:265 (1966).
K. Ridgway and K. J. Tarbuck, Chem. Eng. Sci. 23:1147 (1968).
G. D. Scott, Nature 194:956 (1962).
K. Gotoh, J. Soc. Powder Tech. Jpn. 15:223 (1978).
J. L. Finney, Proc. R. Soc. Lond. (A) 319:479 (1970).
E. M. Tory, B. H. Church, M. K. Tarn, and M. Ratner, Can. J. Chem. Eng. 51:484 (1973).
J. A. Barker and D. Henderson, Mol. Phys. 21:187 (1971).
G. D. Scott and D. L. Mader, Nature 201:382 (1964).
M. M. Levine and J. Chernick, Nature 208:68 (1965).
K. Gotoh, Nature Phys. Sci. 231:108 (1971).
K. Gotoh, Ind. Eng. Chem. Fundam. 10:161 (1971).
M. Alonso, M. Satoh, and K. Miyanami, Can. J. Chem. Eng. 70:28 (1992).
K. Shinohara and T. Murai, J. Ceramic Soc. Jpn. 101:1369 (1993).
R. Aoki, Handbook for Transport Engineering, edited by T. Uematsu, K. Ikemori, Y, Mori, and S. Itoh, Asakura Shoten, Tokyo, p. 34 (1966).
G. G. Brown, Unit Operations, John Wiley & Sons, New York, p. 214 (1950).
E. J. Crosby, Kagaku Kogaku 25:124 (1961).
P. S. Roller, Ind. Eng. Chem. 22:1206 (1930).
I. Shapiro and I. M. Kolthoff, J. Phys. Colloid Chem. 52:1020 (1948).
R. Sakata, Oyo-butsuri 21:24 (1952).
C. C. Furnas, Bur. Mines Bull. 307:74 (1929).
K. Shinohara and T. Tanaka, Kagaku Kogaku 32:88 (1968).
K. Shinohara and T. Tanaka, J. Chem. Eng. Jpn. 8:50 (1975).
H. Rumpf, Chem. Ing. Techn. 30:144 (1958).
W. Pietsch and H. Rumpf, Chem. Ing. Techn. 39:885 (1967).
N. Ouchiyama and T. Tanaka, Ing. Eng. Chem. Fundam. 19:338 (1980).
C. C. Furnas, Ind. Eng. Chem. 23:1052 (1931).
N. Ouchiyama and T. Tanaka, Ind. Eng. Chem. Fundam. 23:490 (1984); 25:125 (1986).
M. Suzuki, A. Yagi, T. Watanabe, and T. Oshima, Kagaku Kogaku Ronbunshu 10:121 (1984).
M. Suzuki and T. Oshima, Powder Technol. 43:147 (1985).
M. Cross, W. H. Douglass, and R. P. Fields, Powder Technol. 43:27 (1985).
D. Train and C. J. Lewis, Trans. Instn. Chem. Eng. 40:235 (1962).
E. Shotton and D. Grauderton, J. Pharm. Pharmacol. 22:87T (1960).
B. E. Kurtz, Chem. Eng. Progr. 56:67 (1960).
K. Kawakita and K. H. Ludde, Powder Technol. 4:61 (1970/71).
K. Kawakita and S. Taneya, Powder Technol., Plant Kogaku Sha, Tokyo, p. 71 (1967).
T. Wakabayashi, Powder Metal. Jpn. 10:83 (1963).
A. Watanabe and K. Umeya, Zairyo 13:237 (1964).
T. Mogami, Trans. Jpn. Soc. Civil Eng. 129:39 (1966).
H. Kuno, Proc. Fac. Eng. Keioh Univ. 11(41):1 (1958).
M. Arakawa, T. Okada, and E. Suito, Zairyo 15:151 (1966).
K. Kawakita, Zairyo 19:514 (1970); 19:579 (1970).
M. Arakawa, T. Okada, and E. Suito, Zairyo 14:764 (1965).
T. Kohata, K. Gotoh, and T. Tanaka, Kagaku Kogaku 31:55 (1967).
A. Suzuki, H. Takahashi, and T. Tanka, Powder Technol. 2:72 (1969).
K. Shinohara, K. Tamura, K. Gotoh, and T. Tanaka, Kagaku Kogaku 31:287 (1967).
H. A. Janssen, VDI. Z 39:1045 (1895).
J. H. Shaxby and J. C. Evans, Proc. R. Instrum. 19:742 (1910).
K. Shinohara and T. Tanaka, Chem. Eng. Sci. 29:1977 (1974).
K. Shinohara and T. Tanaka, Ind. Eng. Chem. Proc. Des. Dev. 14:1 (1975).
K. Shinohara and T. Tanaka, Chem. Eng. Sci. 30:369 (1975).
S. Ergun, Chem. Eng. Progr. 48:89 (1952).
K. Shinohara and T. Murai, Kagaku Kogaku Ronbunshu 20 198 (1994).
K. Shinohara and M. Kudo, J. Soc. Mater. Eng. Res. Jpn. 5:22 (1992).
K. Shinohara, J. Soc. Mater. Eng. Res. Jpn. 3:19 (1990).
N. Soda, Friction and Lubrication, Iwanami Shoten, Tokyo, p. 40 (1953).
J. Th. Overbeek, Colloid Science, Vol. 1, Elsevier, Amsterdam, p. 245 (1952).
H. Rumpf, J. Res. Assoc. Powder Techn. Jpn. 9:3 (Special autumn issue, 1972).
R. S. Bradley, Trans. Faraday Soc. 32:1088 (1936).
J. Overbeek and M. J. Sparney, Disc. Faraday Soc. 18:12 (1954).
J. Czarnecki and T. Dabros, J. Colloid Interface Sci. 78:25 (1980).
B. Derjaguin, Kolloid Z. 69:155 (1934).
R. Hogg, T. W. Healy, and D. W. Fuersteau, Trans. Faraday Soc. 62:1638 (1966).
N. Kudoh, M. Kuramae, and T. Tanaka, Kagaku Kogaku Ronbunshu 2:625 (1976).
K. Iinoya and H. Muramoto, Zairyo 16:70 (1967).
H. Tsunakawa and R. Aoki, Kagaku Kogaku 36:281 (1972).
M. Corn, J. Air Poll. Contr. Assoc. 11:528 (1961); 11:566 (1961).
K. Hotta, K. Takeda, and K. Iinoya, Powder Technol. 10:231 (1974).
M. Arakawa and S. Yasuda, Preprint of 37th Symposium by Tokai Branch or Society of Chemical Engineers of Japan, p. 7 (1977).
M. Chikazawa, W. Nakajima, and T. Kanazawa, J. Res. Assoc. Powder Tech. Jpn. 14:18 (1977).
H. Schubert, Chem. Ing. Techn. 40:745 (1968).
M. S. Kordecki and C. Orr, Arch. Environ. Health 1:1 (1960).
G. Boehme, H. Krupp, H. Rabenhort, and G. Sandstede, Trans. Instn. Chem. Eng. 40:252 (1962).
B. V. Deryagin and A. D. Zimon, Kolloid. Z 23:544 (1961).
H. Emi, S. Endoh, C. Kanaoka, and S. Kawai, Kagaku Kogaku Ronbunshu 3:580 (1977).
S. Asakawa and G. Jimbo, Zairyo 16:358 (1967).
Y. Kousaka, S. Endoh, T. Horiuchi, and T. Araida, Kagaku Kogaku Ronbunshu 18:223 (1992).
H. Schubert, W. Herrman, and H. Rumpf, Powder Technol 11:121 (1975).
K. Shinohara and T. Takaka, Preprint of Third Congress CHISA, Marianske Lazne, 1969; J. Chem. Eng. Jpn. 8:46 (1975).
H. Rumpf, in Agglomeration, edited by W. A. Knepper, Interscience, New York, p. 379 (1962).
G. A. Turner, M. Balasubramanian, and L. Otten, Powder Technol. 15:97 (1976).
W. Pietsch, E. Hoffman, and H. Rumpf, Ind. Eng. Chem. Prod. Res. Dev. 8:58 (1969).
M. D. Ashton, R. Farley, and H. H. Valentin, J. Sci. Instrum. 41:763 (1964).
H. Schubert and I. W. Wibowo, Chem. Ing. Techn. 42:541 (1970).
R. Farley and F. H. H. Valentin, Trans. Instn. Chem. Eng. 43:T193 (1965).
J. T. Fell and J. M. Newton, J. Pharm. Sci. 59:688 (1970).
K. Shinohara, H. Kobayashi, K. Gotoh, and T. Tanaka, J. Res. Assoc. Powder Tech. Jpn. 2:352 (1965).
R. M. Griffith, Chem. Eng. Sci. 20:1015 (1965).
H. Schubert, Powder Technol. 11:107 (1975).
R. Aoki and H. Tsunakawa, Zairyo 18:497 (1969).
H. Rumpf, Chem. Ing. Techn. 42:538 (1970).
G. Jimbo, S. Asakawa, and N. Soga, Zairyo 17:540 (1968).
H. Schubert, K. Sommer, and H. Rumpf, Chem. Ing. Techn. 48:716 (1976).
T. Nagao, Bull. JSME 10:775 (1967); Kikai Gakkai Ronbunshu (2) 33:229 (1967).
J. Tsubaki and G. Jimbo, Powder Technol. 37:219 (1984).
D. C. H. Cheng, Chem. Eng. Sci. 23:1405 (1968).
S. Kocova and P. Pilpel, Powder Technol. 7:51 (1973).
M. D. Ashton, D. C. H. Cheng, R. Farley, and F. H. H. Valentin, Rheol. Acta 4:206 (1965).
W. Pietsch, Nature 217:736 (1968).
K. Shinohara and C. E. Capes, Powder Technol. 24:179 (1979).
K. Shinohara, C. E. Capes, and A. Fouda, Powder Technol. 32:163 (1982).
R. Aoki and K. Yamahuji, J. Res. Assoc. Powder Tech. Jpn. Special Issue, p. 33 (Feb. 1966).
K. Umeya, N. Kitamori, M. Araki, and H. Miwa, Zairyo 15:166 (1966).
J. F. Carr and D. M. Walker, Powder Technol. 1:369 (1967/68).
S. Kocova and N. Pilpel, Powder Technol. 5:329 (1971/71).
H. Tsunakawa and R. Aoki, Powder Technol. 33:249 (1982).
K. Matsumoto, M. Yoshida, A. Suganuma, R. Aoki, and H. Murata, J. Jpn. Soc. Powder Powder Metal. 19:653 (1982).
G. G. Enstad, Proc. Eur. Symp. Part. Technol. B 997 (1980).
M. Hirota, T. Oshima, and M. Naito, J. Soc. Powder Technol. Jpn. 19:337 (1982).
M. Suzuki, K. Makino, K. Iinoya, and K. Watanabe, J. Soc. Powder Technol. Jpn. 17:559 (1980).
A. Gotoh, M. Kawamura, H. Matsushima, and H. Tsunakawa, J. Soc. Powder Technol. Jpn. 21:131 (1984).
M. Yamada, K. Kuramitsu, and K. Makino, Kagaku Kogaku Ronbunshu 12:408 (1986).
R. Aoki, Methods of Measuring Powder Properties, edited by S. Hayakawa, Asakura Shoten, Tokyo, p. 85 (1973).
J. R. F. Arthur and G. G. Enstad, Int. J. Bulk Solids Storage Silos 1:7 (1985).
T. Ohtsubo, J. Res. Assoc. Powder Tech. Jpn. 1:97 (1964).
Editor information
Rights and permissions
Copyright information
© 1997 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Shinohara, K. (1997). Fundamental and Rheological Properties of Powders. In: Fayed, M.E., Otten, L. (eds) Handbook of Powder Science & Technology. Springer, Boston, MA. https://doi.org/10.1007/978-1-4615-6373-0_4
Download citation
DOI: https://doi.org/10.1007/978-1-4615-6373-0_4
Publisher Name: Springer, Boston, MA
Print ISBN: 978-0-412-99621-4
Online ISBN: 978-1-4615-6373-0
eBook Packages: Springer Book Archive