Abstract
Active cold-formed steel research started in the early 70s at the University of Waterloo with Profs. N.C. Lind, A.N. Sherbourne, J. Roorda, and R.M. Schuster, and their respective graduate students. More recently, Prof. L. Xu and his graduate students have also contributed in this area of research. Numerous publications have been documented in National and International sources over the past 35 years. Presented in this paper are the many noteworthy contributions that have been made as a result of the cold-formed steel research activities at the University of Waterloo. What is of particular interest is the number of design recommendations that have been adopted by National and International coldformed steel design Standards and Specifications. With the recently formed Canadian Cold-Formed Steel Research Group, cold-formed steel research is very much alive at the University of Waterloo.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Lind, N.C., and D.K. Schroff: “Utilization of Cold Work in Light Gage Steel,” Proceedings of the 1st Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Aug. 1971.
Lind, N.C., M.K. Ravindra, and J. Power: “A Review of the Effective Width Formula,” Proceedings of the 1st Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Aug. 1971.
Venkataramaiah, K.R.: “Optimum Edge Stiffeners for Thin-Walled Structural Elements,” technical note 7, Solid Mechanics Division, University of Waterloo, Ont., Canada, July 1971.
Venkataramaiah, K.R.: “Ultimate Strength of Eccentrically Loaded Thin-Walled Open Channel Columns,” technical note 9, Solid Mechanics Division, University of Waterloo, Ont., Canada, August 1971.
Sherbourne, A.N., C. Marsh, and C.Y. Liaw: “Stiffened Plates in Uniaxial Compression,” International Association of Bridge and Structural Engineering, Vol. 31,Issue I, 1971
Sherbourne, A.N., and R.M. Korol: “Postbuckling of Axially Compressed Plates,” Journal of the Structural Division, ASCE Proceedings, Vol. 98, Oct. 1972.
Lind, N.C., and K.R. Venkataramaiah: “Compression in Thin-Walled Members,” Proceedings, Canadian Structural Engineering Conference, Montreal, 1972.
Schuster, R.M.: “Composite Steel-Deck Reinforced Concrete Systems Failing in Shear-Bond”, 9th Congress — International Association for Bridge and Structural Engineering, Amsterdam, Holland, May, 1972.
Lind, N.C.: “Strength, Deformation and Design of Cold Formed Steel Structures,”Design in Cold Formed Steel-Edited by R.M. Schuster, Solid Mechanics Division, University of Waterloo, Waterloo, Ont., Canada, 1974.
Lind, N.C.: “Design Procedures for Flexural Members,”Design in Cold Formed Steel-Edited by R.M. Schuster, Solid Mechanics Division, University of Waterloo, Waterloo, Ont., Canada, 1974.
Lind, N.C.: “Recent Developments in Cold Formed Steel Design Requirements,”Design in Cold Formed Steel-Edited by R.M. Schuster, Solid Mechanics Division, University of Waterloo, Waterloo, Ont., Canada, 1974.
Lind, N.C.: “Additional Design Examples,”Design in Cold Formed Steel-Edited by R.M. Schuster, Solid Mechanics Division, University of Waterloo, Waterloo, Ont., Canada, 1974.
Roorda, J.: “On the Buckling Behaviour and Design of Thin-Walled Beams and Columns,” Design in Cold Formed Steel-Edited by R.M. Schuster, Solid Mechanics Division, University of Waterloo, Waterloo, Ont., Canada, 1974.
Schuster, R.M.: “Composite Steel-Deck Reinforced Concrete Floor Systems,”Design in Cold Formed Steel-Edited by R.M. Schuster, Solid Mechanics Division, University of Waterloo, Waterloo, Ont., Canada, 1974.
Schuster, R.M.: “Current Design Criteria of Steel-Deck Reinforced Concrete Slabs,” Design in Cold Formed Steel-Edited by R.M. Schuster, Solid Mechanics Division, University of Waterloo, Waterloo, Ont., Canada, 1974.
Schuster, R.M.: “Proposed Ultimate Strength Design Criteria for Steel-Deck Reinforced Concrete Slabs,” Design in Cold Formed Steel-Edited by R.M. Schuster, Solid Mechanics Division, University of Waterloo, Waterloo, Ont., Canada, 1974.
Lind, N.C., and D.K. Schroff: “Utilization of Cold-Work in Cold Formed Steel,” Journal of the Structural Division, ASCE Proceedings, Vol. 101, Jan. 1975.
Lind, N.C., L.I. Knab, and W.B. Hall: “Economic Study of the Connection Safety Factor,” Proceedings of the 3 rd International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Nov. 1975.
Knab, L.I., and N.C. Lind: “Reliability Based Design Criteria for Temporary Cold-Formed Steel Buildings,” Proceedings of the 3rd International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Nov. 1975.
Schuster, R.M.: “Cold Formed Steel Design Manual,” Solid Mechanics Division, University of Waterloo, Waterloo, Ont., Canada, 1975.
Parimi, S.R., and N.C. Lind: “Limit States Basis for Cold Formed Steel Design,” Journal of the Structural Division, ASCE Proceedings, Vol. 102, March 1976.
Schuster, R.M.: “Composite Steel-Deck Concrete Floor Systems,” Journal of the Structural Division, ASCE Proceedings, Vol. 102, May 1976.
Lind, N.C., M.K. Ravindra, and G. Schorn: “Empirical Effective Width Formula,” Journal of the Structural Division, ASCE Proceedings, Vol. 102, Sept. 1976.
Lind, N.C.: “Numerical Buckling Analysis of Plate Assemblies,” Journal of the Structural Division, ASCE Proceedings, Vol. 104, Feb. 1978.
Schuster, R.M.: “Composite Steel Deck Concrete Floor Slabs,” Proceedings of the Cold-Formed Steel Structures Conference, University of Windsor, Ont., Canada, Apr. 1980.
Schuster, R.M., and W.C. Ling: “Mechanical Interlocking Capacity of Composite Slabs,” Proceedings of the 5th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Nov. 1980.
Venkataramaiah, K.R., J. Roorda, and K.R. Srinivasaiah: “Elastic Modulus of Cold-Formed Sheet Steel,” Proceedings of the 5th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Nov. 1980.
Wing, B.A., and R.M. Schuster: “Web Crippling and the Interaction of Bending and Web Crippling of Unreinforced Multi-Web Cold Formed Steel Sections,” University of Waterloo, Waterloo, Ont., Canada, 1981.
Wing, B.A., and R.M. Schuster: “Web Crippling of Decks Subjected to Two Flange Loading,” Proceedings of the 6th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Nov. 1982.
Schurter, P.G., R.M. Schuster, and A.S. Zakrzewski: “Combined Compression and Lateral Loads on Load-Bearing Steel Stud Walls,” Proceedings of the 6th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Nov. 1982.
Seleim, S.S., and R.M. Schuster: “Shear-Bond Capacity of Composite Slabs,” Proceedings of the 6th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Nov. 1982.
Queen, D.J., and N.C. Lind: “Interactive Buckling of Thin-Walled Compression Members,” Proceedings of the SSRC Annual Technical Session, 1985.
Seleim, S.S., and R.M. Schuster: “Shear-Bond Resistance of Composite Deck-Slabs” Canadian Journal of Civil Engineering, Vol. 12, Number 2, June 1985.
ing, B.A., and R.M. Schuster: “Web Crippling of Multi-Web Deck Sections Subjected to Interior One Flange Loading,” Proceedings of the 8th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Nov. 1986.
Schuster, R.M., S.R. Fox, and D.L. Tarlton: “An LRFD Standard for Cold Formed Steel Design,” Cold-Formed Steel, Workshop Proceedings of the 3rd International Conference on Tall Buildings, Jan. 1986.
Fox, S.R., R.M. Schuster, and D.L. Tarlton: “The Canadian LRFD Standard for Cold-Formed Steel Design,” Proceedings of the 8th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Nov. 1986.
Schurter, P.G., and R.M. Schuster: “Aluminum-Zinc Alloy Coated Steel for Composite Slabs,” Proceedings of the 8th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Nov. 1986.
Schuster, R.M., and R.E. Suleiman: “Composite Slabs Subjected to Repeated Point Loading,” Proceedings of the 8th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Nov. 1986.
Schuster, R.M.: “Excerpts From the New Canadian Cold Formed Steel Design Standard,” Proceedings of the International Conference on Steel and Aluminum Structures, Cardiff, Great Britain, 1987.
McCuaig, L.A., and R.M. Schuster: “Repeated Point Loading on Composite Slabs,” Proceedings of the 9th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Nov. 1988.
Schuster, R.M. et al., “Standard For Composite Steel Deck,” Canadian Sheet Steel Building Institute, CSSBI 12M-96, Cambridge, Ontario, October 1996.
McCuaig, L.A., and R.M. Schuster: “Safety Indexes for Shear-Bond Failure of Composite Slabs,” Proceedings of the 10th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Oct. 1990.
Schuster, R.M.: “The New Canadian Cold Formed Steel Design Standard,” Trends in Steel Structures for Mining and Building, Johannesburg, South Africa, 1991.
Schuster, R.M.: “Lightweight Steel Framing in the 90s,” Trends in Steel Structures for Mining and Building, Johannesburg, South Africa, 1991.
Dinovitzer, A.S., M. Sohrabpour, and R.M. Schuster: “Observations and Comments Pertaining to CAN/CSA-S136-M89,” Proceedings of the 11th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Oct. 1992.
Schuster R.M.: “The 1989 Edition of the Canadian Cold Formed Steel Design Standard,” Proceedings of the 11th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Oct. 1992.
Papazian, R.P., R.M. Schuster, and M. Sommerstein: “Multiple Stiffened Deck Profiles,” Proceedings of the 12th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Oct. 1994.
Schuster, R.M., C.A. Rogers, and A. Celli: “Research into Cold Formed Steel Perforated C-Sections in Shear,” Progress Report No. 1, CSSBI/IRAP Project, University of Waterloo, Waterloo, Ont., 1995.
Rogers, C.A., and R.M. Schuster: “Effective Width of a Single Edge Stiffener Subjected to a Stress Gradient,” Proceedings of the 13th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Oct. 1996.
Rogers, C.A., and R.M. Schuster: “Interaction of Flange/Edge-Stiffened Cold Formed Steel CSections,” Proceedings of the 13th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Oct. 1996.
Rogers, C.A., and R.M. Schuster: “Cold Formed Steel Flat Width Ratio Limits, d/t and di/w,” Proceedings of the 13th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Oct. 1996.
Hancock, G.J., C.A. Rogers, and R.M. Schuster: “Comparison of the Distortional Buckling Method for Flexural Members with Tests,” Proceedings of the 13th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Oct. 1996.
Rogers, C.A. and R.M. Schuster: “Test Results and Comparison of Cold Formed Steel Edge Stiffened C and Z-sections,” 1st CSCE Structural Specialty Conference, Edmonton, May 29 to June 1, 1996.
Rogers, C.A., and R.M. Schuster: “Flange/Web Distortional Buckling of Cold Formed Steel Sections in Bending,” Thin-Walled Structures Journal, Vol. 27 Number 1, Elsevier, January 1997.
Prabakaran, A., and R.M. Schuster: “Web Crippling Behavior of Cold Formed Steel Members,” Proceedings of the 14th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Oct. 1998.
Gerges, R.R., and R.M. Schuster: “Web Crippling of Single Web Cold Formed Steel Members Subjected to End-One-Flange Loading,” Proceedings of the 14th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Oct. 1998.
Acharya, V.V., and R.M. Schuster: “Bending Tests of Hat Sections with Multiple Longitudinal Stiffeners,” Proceedings of the 14th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Oct. 1998.
Acharya, V.V., and R.M. Schuster: “Analysis of Hat Sections with Multiple Intermediate Longitudinal Stiffeners,” Proceedings of the 14th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Oct. 1998.
Fox, S.R., and R.M. Schuster: “Testing of Cold Formed Steel Floor Joists with Bearing Stiffeners,” Proceedings of the 14th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Oct. 1998.
Schuster, R.M., “One North American Specification for the Design of Cold Formed Steel Structures,” XVI National Steel Conference, Buenos Aires, Argentina, Sept. 1998.
Schuster, R.M., “Cold Formed Steel-the Construction Material of the Future,” XVI National Steel Conference, Buenos Aires, Argentina, Sept. 1998.
Sloof, P.A., and R.M. Schuster: “Yield Strength Increase of Cold Formed Sections Due to Cold Work of Forming,” Proceedings of the 15th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Oct. 2000.
Beshara, B., and R.M. Schuster: “Web Crippling of Cold Formed Steel Members,” Proceedings of the 15th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Oct. 2000.
Fox, S.R., and R.M. Schuster: “Strength of Bearing Stiffeners in Cold Formed C-Sections,” Proceedings of the 15th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Oct. 2000.
Craig, B., and R.M. Schuster: “Calibration of Cold Formed Steel Shear Equations,” Proceedings of the 15th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Oct. 2000.
Fox, S.R., and R.M. Schuster: “Lateral Strength of Wind Load Bearing Wall Stud-to-Track Connection,” Proceedings of the 15th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Oct. 2000.
Xu, L., H. Min, and R.M. Schuster: “Optimum Design of Cold Formed Steel Residential Roof Trusses,” Proceedings of the 15th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Oct. 2000.
Xu, L., Z. Ling, W.-C. Xie, and R.M. Schuster: “Dynamic Behaviour of Floors with Cold-Formed Steel Joists,” Proceedings of the 15th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Oct. 2000.
Yu, W.W.: Cold-Formed Steel Design, 3rd Edition, John Wiley & Sons, Inc. New York, NY., 2000.
Xu, L., and J. Cui: “Connection Flexibility of C-Shape Cold Formed Steel Connections,” Proceedings of the 6th Pacific Steel Structures Conference, Beijing, China, Oct. 2002.
Xu, L., Y. Gong, and P. Guo: “Compressive Tests of Cold Formed Steel Curved Panels,” Journal of Constructional Steel Research, 57, 2001.
Schuster, R.M., and T. Trestain: “Criteria for the Testing of Composite Slabs,” Canadian Sheet Steel Building Institute, CSSBI S2-2002, Cambridge, Ontario, March 2002.
Beshara, B., and R.M. Schuster: “Web Crippling of Cold Formed Steel Members,” Proceedings of the 16th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Oct. 2002.
Tangorra, F.M., R.M. Schuster, and R.A. LaBoube: “Calibrations of Cold-Formed Steel Welded Connections,” Proceedings of the 16th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Oct. 2002.
Wallace, J.A., and R.M. Schuster: “Testing of Bolted Cold Formed Steel Connections in Bearing (With and Without Washers),” Proceedings of the 16th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Oct. 2002.
Wallace, J.A., R.M. Schuster, and R.A. LaBoube: “Calibrations of Bolted Cold Formed Steel Connections in Bearing (With and Without Washers),” Proceedings of the 16th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Oct. 2002.
Wallace, J.A., R.M. Schuster, and R.A. LaBoube: “Bending and Web Crippling Interaction of Cold-Formed Steel Members,” Proceedings of the 16th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Oct. 2002.
Fox, S.R., and R.M. Schuster: “Bearing Stiffeners in Cold-Formed Steel C-Sections,” International Conference on Advances in Structures, Sidney, Australia, 2003.
Schuster, R.M., and T. Trestain: “Criteria for the Design of Composite Slabs” Canadian Sheet Steel Building Institute, CSSBI S3-2002, Cambridge, Ontario, September 2003.
Wallace, J.A., and R.M. Schuster: “Web Crippling of Cold Formed Steel Multi-Web Deck Sections Subjected to End One-Flange Loading,” Proceedings of the 17th International Specialty Conference on Cold-Formed Steel Structures, University of Missouri-Rolla, Nov. 2004.
Xu, L.: “Vibration Evaluation of Lightweight Floors Supported by Cold Formed Steel Joists,” Proceedings of the 4th International Conference on Advances in Steel Structures, Shanghai, June, 2005.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2006 Springer
About this paper
Cite this paper
Schuster, R.M. (2006). Cold-formed Steel Research at The University of Waterloo. In: Pandey, M., Xie, WC., Xu, L. (eds) Advances in Engineering Structures, Mechanics & Construction. Solid Mechanics and Its Applications, vol 140. Springer, Dordrecht. https://doi.org/10.1007/1-4020-4891-2_3
Download citation
DOI: https://doi.org/10.1007/1-4020-4891-2_3
Publisher Name: Springer, Dordrecht
Print ISBN: 978-1-4020-4890-6
Online ISBN: 978-1-4020-4891-3
eBook Packages: EngineeringEngineering (R0)