Abstract
The production of miniaturized moulding tools or mould inserts of glass and sintered carbide is a field of research at the Institute of Machine Tools and Production Technology at the University of Braunschweig, Germany. The cost effective mass production of micro parts or micro structures by micro moulding is dependent upon the availability of high quality micro moulds. These moulding tools can be used for production of micro parts by hot embossing or micro injection moulding or micro forming processes.
Our challenge was to manufacture 3D structures in glass or sintered carbide with a smooth surface and as minimal edge chipping as possible. The technology of our choice was microgrinding, therefore this paper contributes to the understanding of a μ-grinding process technology, and its application for micro moulding tool production.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
Masuzawa, T.: State of the Art in Micromachining. Annals of the CIRP; Vol. 49/2, 2000, pp. 473–488
Hoffmeister H.-W., Wenda A., Herrmann H.: The fabrication and application of micro milling cutters. Proceedings (Volume 1) of the MICRO.tec 2000, VDE World Microtechnologies Congress, September 25th/27th 2000, EXPO, Germany, pp. 125–129
Klocke F., Rübenach O.: Ultrasonic assisted diamond turning of steel and glass. Proceedings of the international seminar on precision engineering and micro technology (EUSPEN); July 19th/20th 2000, Aachen, Germany, pp. 179–190
Takeuchi Y.: Developement of ultraprecision milling machine and its application to micromachining. Proceedings of the international seminar on precision engineering and micro technology (EUSPEN), July 19th/20th 2000, Aachen, Germany, pp. 3–12
Koch O., Wolf A., Ehrfeld W., Michel F., Gruber H.: Micro-electro discharge machining for mould inserts generation-application and technology. Proceedings (Volume 2) of the MICRO.tec 2000, VDE World Microtechnologies Congress, September 25th/27th 2000, Expo 2000, Hannover, Germany, pp. 19–24
Hoffmeister H.-W., Wenda A.: Novel grinding tools for machining precision micro parts of hard and brittle materials. Proceedings of the 15th annual meeting of the ASPE, October 22th/27th 2000, Scottsdale, Arizona, U.S.A., pp. 152–155
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2002 Kluwer Academic Publishers
About this chapter
Cite this chapter
Hoffmeister, H.W., Wenda, A. (2002). Precision Manufacturing of Micro Moulding Tools of Glass and Sintered Carbide. In: Inasaki, I. (eds) Initiatives of Precision Engineering at the Beginning of a Millennium. Springer, Boston, MA. https://doi.org/10.1007/0-306-47000-4_82
Download citation
DOI: https://doi.org/10.1007/0-306-47000-4_82
Publisher Name: Springer, Boston, MA
Print ISBN: 978-0-7923-7414-5
Online ISBN: 978-0-306-47000-4
eBook Packages: Springer Book Archive