Regular ArticleSynthesis of Iron Oxide Nanoparticles Used as MRI Contrast Agents: A Parametric Study☆
Abstract
Colloidal iron oxides play an important role as magnetic resonance imaging (MRI) contrast agents. The superparamagnetic particles actually used are constituted by solid cores (diameter of 5–15 nm), generally coated by a thick polysaccharidic layer (hydrodynamic radii of 30–100 nm), and formulated by direct coprecipitation of iron salts in the presence of polymeric material. To better control the synthesis, we attempted to formulate new stable uncoated superparamagnetic nanoparticles. Colloids were generated by coprecipitation of an aqueous solution of iron salts and tetramethylammonium hydroxide (TMAOH) solution. The influence of parameters such as media composition, iron media, injection fluxes, Fe and TMAOH concentrations, temperature, and oxygen on size, magnetic and magnetic resonance relaxometric properties, and colloidal stability of particles were evaluated. We have determined the relative importance of these parameters as well as the optimal conditions for obtaining uncoated stable particles with an average size of 5 nm and interesting relaxivities. The interpretation of the observed limits takes into account diffusibilities of reactants and product, feeding rates of reactants, and surface properties of nanoparticles. A model of synthesis, related to spontaneous emulsification of suspensions, is proposed.
References (20)
- C. Domingo et al.
Colloids Surf., A
(1993) - D. Pouliquen et al.
Magn. Reson. Imaging
(1991) - T. Sugimoto et al.
J. Colloid Interface Sci.
(1980) - C. Domingo et al.
Mater. Res. Bull.
(1991) - M. Gallardo et al.
Int. J. Pharm.
(1993) - B.E. Van Beers et al.
J. Radiol.
(1995) - C. Chouly et al.
J. Microencapsulation
(1996) - D. Pouliquen et al.
Magn. Reson. Med.
(1992) - J.P. Jolivet et al.
Clays Clay Miner.
(1992)
Cited by (528)
Stabilization of γ-Fe<inf>2</inf>O<inf>3</inf> nanoparticles to heat by doping Nb and its property studied by Mössbauer spectroscopy
2024, Journal of Magnetism and Magnetic MaterialsNb5+-doped γ-Fe2O3 was synthesized by sol–gel method followed by calcination at various temperatures from 200 to 700 °C, analyzed using Powder X-ray Diffraction (PXRD), Transmission Electron Microscopy (TEM), Energy Dispersive X-ray Spectroscopy (EDS) and Mössbauer Spectroscopy. PXRD results show the formation of γ-Fe2O3 at 300 °C and it begins to transform to α-Fe2O3 at 350 °C for pure and 2 at.% Nb-doped samples. As the Nb doping increases (≥3.8 at.%), the transformation was suppressed up to 600 °C. TEM EDS confirms the incorporation of Nb to γ-Fe2O3 lattice in 9.1 at.% Nb sample calcined at 500 °C. At elevated temperature of 700 °C, γ-Fe2O3 went through full transformation to α-Fe2O3 by expelling large amount of Nb to the surface forming FeNbO4. TEM EDS confirms the compositional change during this process with reduced Nb content in α-Fe2O3 and Nb-rich nanoparticle on the surface of α-Fe2O3. Superparamagnetic properties were observed for Mössbauer spectra when the Nb doping increased, which is caused by decreased particle size. The slight increase in internal magnetic field also indicated the transformation from γ-Fe2O3 to α-Fe2O3. High Nb doping with 20 and 40 at.% shows the formation of FeNbO4 at lower temperature where limited or almost no Nb substitution in α-Fe2O3 was detected by EDS.
Unveiling the formation mechanism of polydisperse iron oxide nanoparticles in coprecipitation route
2023, Journal of Crystal GrowthCoprecipitation is the simplest, fastest, and most inexpensive method for preparing metal oxide nanoparticles (NPs). It is considered one of the most convenient methods for simultaneously precipitating two or more aqueous metal salt precursors (such as chlorides, nitrates, oxychloride, etc.) into NPs in a basic solvent, yielding uniform composition. However, the main drawback of this route is the production of NPs with a broad size distribution (polydispersed particle formation), which limits their use in various applications. The present work addresses the experiments and formation mechanism of polydispersed iron oxide magnetite (Fe3O4) NPs using this route. Experiments involving the drop-wise addition of mixed ferric (Fe3+) and ferrous (Fe2+) chloride salt solutions to NaOH base solution at room temperature resulted in a polydispersed Fe3O4 NP system containing both large and small particles at the end of 30 min of the reaction. A mechanism is proposed to explain the formation of these polydispersed Fe3O4 NPs based on the time scales of different individual particle formation events and the experimental aging time. The mechanism elucidates that the time scales of events such as Fe3O4 nucleation, diffusional-limited and Ostwald ripening growth of small and large particles, and the coagulation of two small particles or a small particle with a large particle are smaller, and completed within the experimentally allowed aging time. Conversely, the coagulation time for two large particles exceeds the experimental time, preventing complete coagulation. As a result, incomplete coagulation of large particles and the completion of all other events lead to the formation of a polydispersed Fe3O4 NP system at the end of the synthesis. The combined experiments and time scale-based mechanism explain the polydispersed NP formation in the coprecipitation route, and the insights gained from this understanding can be beneficial for optimizing synthesis conditions to achieve a controlled size distribution of Fe3O4 and other NP systems.
Targeted anticancer drug delivery via surface engineered iron oxide nanoparticles: A recent update
2023, Journal of Drug Delivery Science and TechnologyCancer treatment is a challenging task due to the complexity and variation of the disease, late diagnosis, and severe side effects of the antineoplastic agents. Targeted drug delivery via surface-engineered iron oxide nanoparticles (IONPs) can improve treatment effectiveness while reducing the severity of adverse effects. The effective size control capabilities and superparamagnetic behavior make IONPs a promising drug delivery system for cancer treatment. Their preparation methodologies should optimize essential attributes like size, shape, and superparamagnetic properties. Furthermore, their surface properties must enhance colloidal stability and half-life in the bloodstream. This review describes various surface coating agents currently employed to stabilize the IONPs and their recent uses in targeted drug administration. Surface modified IONPs can be cross-linked with tumor-targeting ligands (like monoclonal antibodies, peptides, and proteins) for their delivery to the cancer-targeted site with/without utilizing their magnetic properties. Their active targeting approach can reduce the dosage requirement for efficient drug binding. On the contrary, the passive delivery of IONPs is influenced by their physicochemical properties and particle size. Surface modification with biopolymers can minimize blood protein opsonization, extending blood circulation and sustaining drug release at the cancer site. On the other hand, metal and metal oxide are employed as doping agents on the surface of IONPs to provide good physical and biological strength. Surface functionalized IONPs may become the next generation cancer treatment strategy; however, more study into their clinical applicability and commercialization is required.
Faraday rotation enhancement due to proximity effect of surface plasmon resonance in magnetoplasmonic colloidal mixtures
2023, Journal of Molecular LiquidsThe modification of Magneto-optic Faraday Rotation (MFR) based on Surface Plasmon Resonance (SPR) of noble metal nanoparticles (NP) has been an exciting field of research. The underlying physical mechanisms are intriguing and correspond to various observation patterns in composite magnetoplasmonic systems. Exploiting the immense potential of SPR phenomenon for excellent electromagnetic field confinement and energy transfer to a wide variety of dimensionally different nanostructures, we report MFR measurements in typical magnetoplasmonic colloidal mixtures of separately synthesized cobalt ferrite (CoFe2O4) and gold (Au) NP at wavelength of 532 nm where we have observed a spectacular possibility for “proximity effect” based plasmonic enhancement of MFR, for the very first time. The Langevin-type MFR patterns show a strong dependence on the concentrations of participating systems, where a typical optimum concentration produced a significant enhancement in MFR. For both the entities present in the liquid, a mutually dependent optimum concentration was necessary to obtain the Langevin pattern as well as MFR enhancement, confirming the influence from SPR due to the proximity effect. The observations open up exciting possibilities to apply SPR to discover novel magnetoplasmonic phenomena underlined by proximity effects, in addition to eluding constrained procedures to synthesize composite magnetoplasmonic systems.
Comparison study of iron and iron-oxide nanoparticles for thermoplasmonic applications
2023, Materials Today CommunicationsThe plasmonic nanoparticles have the properties of surface plasmon resonance (SPR) that can be used to heat up the surrounding by absorbing maximum light from an irradiated beam. Therefore, the present study reveals the photothermal effect of iron and iron-oxide nanosphere in different ambient environments with varying radii from 20 nm to 60 nm. Based on Mie’s theory, PyMieLab_V1.0 software is used to calculate the size-dependent absorption cross-section of spherical nanoparticles. The absorption spectra at λmax have been tuned from the UV to Infrared region of Fe nanoparticles in different surrounding environments while for Fe2O3 NPs, it reveals in the UV region. As the nanoparticle size increases, the absorption peak position of Fe and Fe2O3 NPs shifts towards the longer wavelength regime on the electromagnetic spectrum. It has been observed that the heat generation rate and the maximum temperature gradually increase with particle sizes and a 60 nm particle’s size has maximum heat generated as well as a maximum temperature increase further, iron NPs are more dominant than iron oxide NPs. At the resonance wavelength, the near-field enhancement is observed with the nanosphere's radii, but with variation in the value of refractive indices, it decreases. Thus, this simulated work opens potential applications in a newly emerging field like thermo-plasmonic and thermo-optic.
Microbial synthesis of magnetic nanoparticles for plant science and agriculture
2023, Plant Nano BiologyEnormous usage of nanoparticles (NPs) has transformed several societal arenas including health care and agriculture indicating their great demand and production at a high scale. In this context, magnetic nanoparticles (MNPs) have attracted a great deal of attention in the last ten years. Due to the distinctive characteristics and captivating prospective usage demonstrated in a variety of domains, many methods for synthesis of MNPs have lately risen to the forefront. Out of many, microbial synthesis of MNPs is safer and cost-effective. Microorganisms, showing a great deal of biodiversity, provide a range of options to manufacture MNPs. Moreover, MNPs could be produced by microbes in vast quantities and at a low cost. It has also been shown that by employing microbial processes, it is possible to produce both NPs of crystalline pure magnetite as well as magnetite with some of the Fe replaced by Co, Ni, Cr, Mn, Zn, or the rare earths. Additionally, biological methods for producing MNPs are eco-friendly and present chances for industrialization. This review discusses methods for producing MNPs by microbial synthesis and their potential applications in agriculture along with the constraints in their synthesis and usage.
- ☆
D. LasicF. Martin
- 1
To whom correspondence should be addressed. E-mail:[email protected].