Title

Thermal and bifurcation characteristics of heat-recirculating conversion of gaseous fuels

Journal title

Archives of Thermodynamics

Yearbook

2010

Issue

No 2 July

Authors

Budzianowski, Wojciech

Keywords

Heat-recirculating system ; Conversion of gaseous fuels ; Thermal integration

Divisions of PAS

Nauki Techniczne

Coverage

63-75

Publisher

The Committee of Thermodynamics and Combustion of the Polish Academy of Sciences and The Institute of Fluid-Flow Machinery Polish Academy of Sciences

Date

2010

Type

Artykuły / Articles

Identifier

DOI: 10.2478/v10173-010-0009-6

Source

Archives of Thermodynamics; 2010; No 2 July; 63-75

References

Budzianowski W. (2009), Towards improvements in thermal efficiency and reduced harmful emissions of combustion processes by using recirculation of heat and mass: A review, Recent Patents on Mechanical Engineering, 2, 228. ; Cho J. (2009), Demonstration of an external combustion micro-heat engine, Proceeding of the Combustion Institute, 32, 3099. ; Budzianowski W. (2008), Auto-thermal combustion of lean gaseous fuels utilizing a recuperative annular double-layer catalytic converter, Canadian Journal of Chemical Engineering, 86, 778. ; Kotowicz J. (2009), Biomass gasification in a fixed-bed gasifier, Rynek Energii, 81, 2, 52. ; Chmielniak T. (2003), Co-gasification of biomass and coal for methanol synthesis, Applied Energy, 74, 393. ; Pizza G. (2008), Dynamics of premixed hydrogen/air flames in microchannels, Combustion and Flame, 152, 433. ; Budzianowski W. (2009), Superadiabatic lean catalytic combustion in a high-pressure reactor, International Journal of Chemical Reactor Engineering, 7. ; Kandlikar S. (2003), Evolution of microchannel flow passages - Termohydraulic performance and fabrication technology, Heat Transfer Engineering, 24, 3. ; Mikielewicz D. (2008), Cogenerative micro power plants - a new direction for development of power engineering?, Archives of Thermodynamics, 29, 109. ; Budzianowski W. (2009), Design of dynamics of a recuperative catalytic combustor: enhancement in operation and control, Chemical Product and Process Modeling, 4, 2. ; Milewski J. (2007), Off-design analysis of SOFC hybrid system, International Journal of Hydrogen Energy, 32, 687. ; Kowalczyk S. (2006), Analysis of thermodynamic and material properties assumptions for three-dimensional SOFC modelling, Archives of Thermodynamics, 27, 21. ; Budzianowski W. (2010), An oxy-fuel mass-recirculating process for H2 production with CO₂ capture by autothermal catalytic oxyforming of methane, International Journal of Hydrogen Energy, 35, 7454. ; Kee R. (2008), Solid oxide fuel cells: operating principles, current challenges, and the role of syngas, Combustion Science and Technology, 180, 1207. ; Ordorica-garcia G. (2006), Technoeconomic evaluation of IGCC power plants for CO₂ avoidance, Energy Conversion and Management, 47, 2250. ; Budzianowski W. (2010), Mass-recirculating systems in CO₂ capture technologies: A review, Recent Patents on Engineering, 4, 15. ; Budzianowski W. (2009), A rate-based method for design of reactive gas-liquid systems, Rynek Energii, 83, 4, 21. ; Parizek T. (2008), Persistent pollutants emission abatement in waste-to-energy systems, Clean Technologies and Environmental Policy, 10, 2, 147.

Editorial Board

International Advisory Board

J. Bataille, Ecole Central de Lyon, Ecully, France

A. Bejan, Duke University, Durham, USA

W. Blasiak, Royal Institute of Technology, Stockholm, Sweden

G. P. Celata, ENEA, Rome, Italy

L.M. Cheng, Zhejiang University, Hangzhou, China

M. Colaco, Federal University of Rio de Janeiro, Brazil

J. M. Delhaye, CEA, Grenoble, France

M. Giot, Université Catholique de Louvain, Belgium

K. Hooman, University of Queensland, Australia

D. Jackson, University of Manchester, UK

D.F. Li, Kunming University of Science and Technology, Kunming, China

K. Kuwagi, Okayama University of Science, Japan

J. P. Meyer, University of Pretoria, South Africa

S. Michaelides, Texas Christian University, Fort Worth Texas, USA

M. Moran, Ohio State University, Columbus, USA

W. Muschik, Technische Universität Berlin, Germany

I. Müller, Technische Universität Berlin, Germany

H. Nakayama, Japanese Atomic Energy Agency, Japan

A. Nenarokomov, Moscow Aviation Institute, Russia

S. Nizetic, University of Split, Croatia

H. Orlande, Federal University of Rio de Janeiro, Brazil

M. Podowski, Rensselaer Polytechnic Institute, Troy, USA

A. Rusanov, Institute for Mechanical Engineering Problems NAS, Kharkiv, Ukraine

M. R. von Spakovsky, Virginia Polytechnic Institute and State University, Blacksburg, USA

A. Vallati, Sapienza University of Rome, Italy

H.R. Yang, Tsinghua University, Beijing, China