Abstract
Controlling the mixing field of turbulent jets is an important approach in optimizing practical combustion systems. The use of multi-lateral jets upstream from the nozzle exit to control mixing fields is one particular method. Existing studies have investigated jets into a confined cross-flow (JICCF) for dilution mixing, but there is a paucity of data available on the fundamentals for turbulent mixing capabilities of JICCF. The current study investigates the flow structures and Primary Reynolds number mixing characteristics within a round pipe flow modified by four equi-spaced, lateral side injectors. Experiments are conducted in a primary water jet flow that is modified with smaller jets located one central (axial) jet diameter upstream of the nozzle exit. Flow structures and mixing within the nozzle are non-intrusively characterized using simultaneous planar optical techniques. Planar laser-induced fluorescence is used to measure the scalar mixing of the side and axial jet streams, and particle imaging velocimetry is used to measure the planar velocities. Several cases are investigated with variable primary flow to explore the influence of cross-flow velocity on the induced mixing structures within the nozzle. By varying the momentum ratio, three characteristic flow modes are identified within the primary flow, namely streaming mode, impinging mode, and backflow mode. The impact of these modes on the flow and scalar fields is presented and discussed.
Similar content being viewed by others
References
Beer JM (2000) Combustion technology developments in power generation in response to environmental challenges. Prog Energy Combust Sci 26:301–327
Birzer CH, Kelso RM, Dally BB (2011) Flame structure of jets in confined cross-flows. In: Proceedings of the Australian combustion symposium
Doerr TH, Blomeyer M, Hennecke DK (1997) Optimization of multiple jets mixing with a confined crossflow. J Eng Gas Turbines Power 119:315–321
Goldstein RJ, Behbahani AI (1982) Impingement of a circular jet with and without cross flow. Int J Heat Mass Transf 25(9):1377–1382
Gosman AD, Simitovic R (1986) An experimental study of confined jet mixing. Chem Eng Sci 41:1853–1871
Holdemann JD, Liscinsky DS, Dechsle VL, Samuelsen GS, Smith CE (1997) Mixing of multiple jets with a confined subsonic crossflow: Part I—cylindrical duct. J Eng Gas Turbines Power 119(4):852–862
Hoult DP, Weil JC (1972) Turbulent plume in a laminar cross flow. Atmos Environ 6:513–531
Kalt PAM, Nathan GJ (2007) Corrections to facilitate planar imaging of particle concentration in particle-laden flows using Mie scattering. Part 2: diverging laser sheets. Appl Opt 46(29):7227–7236
Kalt PAM, Long M (2014) Oma for Mac OS X. www.oma-x.org
Kalt PAM, Birzer CH, Nathan GJ (2007) Corrections to facilitate planar imaging of particle concentration of particle-laden flows using Mie scattering. Part 1: collimated laser sheets. Appl Opt 46:5823–5834
Knowles K, Bray D (1993) Ground vortex formed by impinging jets in crossflow. J Aircr 30(6):872–878
Kroll JT, Sowa WA, Samuelsen GS (2000) Optimization of orifice geometry for crossflow mixing in a cylindrical duct. J Propuls Power 16(6):929–938
Landreth CC, Adrian RJ (1990) Impingement of a low reynolds number turbulent circular jet onto a flat plate at normal incidence. Exp Fluids 9:74–84
Leong MY, Samuelsen GS, Holdeman JD (1999) Mixing of jet air with a fuel-rich, reacting crossflow. J Propuls Power 15(5):617–622
Leong MY, Samuelsen GS, Holdeman JD (2000) Optimization of jet mixing into a rich, reacting crossflow. J Propuls Power 16(5):729–735
Liu RH, Stremler MA, Sharp KV, Olsen MG, Santiago JG, Adrian RJ, Aref H, Beebe DJ (2000) Passive mixing in a three-dimensional serpentine microchannel. J Microelectromech Syst 9:190–197
Nathan GJ, Kalt PAM, Alwahabi ZT, Dally B, Medwell P, Chan Q (2012) Recent advances in the measurement of strongly radiating, turbulent reacting flows. Prog Energy Combust Sci 38:41–61
Nguyen NT, Wu Z (2005) Micromixers—a review. J Micromech Microeng 15(2):R1–R16
Pitsch H, Steiner H (2000) Scalar mixing and dissipation rate in large eddy simulation of non premixed turbulent combustion. Proc Combust Inst 28:41–49
Saffman PG (1979) The approach of a vortex pair to a plane surface in inviscid fluid. J Fluid Mech 92(3):497–503
Shan JW, Lang DB, Dimotakis PE (2004) Scalar concentration measurements in liquid-phase flows with pulsed lasers. Exp Fluids 36:268–273
Sowa WA, Kroll JT, Samuelsen GS, Holdeman JD (1994) Optimisation of orifice geometry for crossflow mixing in a cylindrical duct. In: 32nd Aerospace Sciences Meeting and Exhibit
Tsunoda H, Saruta M (2002) PLIF study on the diffusion field of a passive scalar in a round jet issuing into a uniform counter-flow. In: Rodi W, Fueyo N (eds) Engineering turbulence modelling and experiments, vol 5. Elsevier, pp 505–514
Acknowledgments
The help of Mr Marc Simpson, Thebarton Lab Manager, in assisting with the setting up of the experiment is gratefully acknowledged.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Thong, C.X., Kalt, P.A.M., Dally, B.B. et al. Flow dynamics of multi-lateral jets injection into a round pipe flow. Exp Fluids 56, 15 (2015). https://doi.org/10.1007/s00348-014-1884-4
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1007/s00348-014-1884-4