Abstract
A large eddy simulation (LES) of turbulent flow around a stationary rectangular cylinder at high Reynolds number of 2.2 × 104 is conducted as the first step to prove the applicability of LES to practical engineering problems. Time-averaged and phase-averaged velocities and turbulent stresses are obtained and they are compared with the experimental data. To investigate mesh dependence on computational results of the LES, two kinds of grid resolution are used. In addition, the effect of a second-order upwind scheme QUICK for convection terms is also investigated due to its dependence on grid resolution. The drag coefficients, the base pressure coefficients and Strouhal numbers are in fairly good agreement with the experimental results, while the computational results show that the artificial dissipative and dispersive effect of QUICK is large in the vicinity of the cylinder in our computation. Thus, it is necessary to use higher-order upwind schemes to reduce the numerical errors, since it is effective in applying LES to practical engineering problems with complicated geometry.