Deformation and fracture in microlaminates

doi:10.1016/S0040-6090(96)08905-5

Thin Solid Films

Volume 286, Issues 1–2, 30 September 1996, Pages 1-31

https://doi.org/10.1016/S0040-6090(96)08905-5 Get rights and content

Abstract

The utility of microlaminates in engineering applications depends ultimately on their strength and toughness. While the properties of monolithic films and coatings can be controlled through crystal structure and microstructure, the properties of microlaminates are a sensitive function of the interfaces. It is the large number of interfaces in a microlaminate that determines the unique behavior of this special type of composite. This review begins with a property-based definition of a microlaminate. The mechanisms by which microlaminates deform plastically are reviewed and evaluated in the context of data on metal-metal, metal-intermetallic, metal-ceramic and ceramic-ceramic systems. It is evident that in addition to layer geometry, the layer microstructure plays a major role in determining the operative deformation mechanism. The fracture processes in a microlaminate are examined in the context of the layer strength, microstructure, defects and crack-tip-dislocation processes. High toughnesses in microlaminate materials can be attained through a combination of mechanisms, and their effectiveness depends critically on the ability to affect the magnitude and shape of the stress field at the tip of the crack. The study of deformation and fracture in microlaminates is still a relatively young field in materials science. However, while our understanding of these processes is still quite incomplete, it is improving rapidly with advances in experiment, theory and modeling capability.

References (113)

M Murakami et al.
D.A Hardwick
Thin Solid Films
(1987)
A.G Evans et al.
Acta. Metall. Mater.
(1995)
J.D Embury et al.
Acta Metall. Mater.
(1994)
S.V Kamat et al.
Scr. Metall. Mater.
(1987)
P Anderson
Scr. Metall. Mater.
(1992)
P.M Anderson et al.
Nanostruct. Mater.
(1995)
C.S Pande et al.
Nanostruct. Mater.
(1993)
V.G Gryaznov et al.
Scr. Metall. Mater.
(1990)
T.G Nieh et al.
Scr. Metall. Mater.
(1991)

A.W Thompson

Acta Metall.

(1975)

C Kim et al.

Thin Solid Films

(1994)

R.F Bunshah et al.

Thin Solid Films

(1980)

C.A.O Henning et al.

Acta Metall.

(1975)

L.M Hsiung et al.

Scr. Metall. Mater.

(1993)

Y Ding et al.

Surf. Coat. Technol.

(1994)

R.F Bunshah et al.

Thin Solid Films

(1984)

R.W Springer et al.

Thin Solid Films

(1978)

R.F Bunshah et al.

Thin Solid Films

(1982)

B.A Movchan et al.

Thin Solid Films

(1982)

M Murakami

Thin Solid Films

(1979)

T Foecke et al.

Scr. Metall. Mater.

(1992)

R.R Oberle et al.

Scr. Metall. Mater.

(1995)

K.S Chan et al.

Acta. Metall. Mater.

(1995)

H Holleck et al.

Surf. Coat. Technol.

(1988)

M.R Hilton et al.

Surf. Coat. Technol.

(1992)

K.J Hsia et al.

J. Mech. Phys Solids

(1994)

G.R Odette et al.

Acta Metall. Mater.

(1992)

M.C Shaw et al.

Acta Metall. Mater.

(1993)

H.C Cao et al.

Acta Metall. Mater.

(1991)

R.M McMeeking

J. Mech. Phys. Solids

(1977)

R.O Ritchie et al.

J. Mech. Phys. Solids

(1973)

A.G Evans et al.

Acta Metall. Mater.

(1992)

A.G Evans et al.

Mater. Sci. Eng.

(1993)

A.G Varias et al.

J. Mech. Phys. Solids

(1991)

H Tada et al.

C Sans et al.

Thin Solid Films

(1983)

H Cao et al.

Mater. Sci. Eng.

(1994)

R.G Rowe et al.

Scr. Metall. Mater.

(1994)

T.P. Moffat, private communication...

J.C Williams

Philos. Trans. R. Soc. London, Ser. A

(1995)

J.D Currey

V.J Laraia et al.

J. Am. Ceram. Soc.

(1989)

W.D Nix

Metall. Trans. A

(1989)

M.F Doerner et al.

CRC Crit. Rev. Solid State Mater. Sci.

(1988)

J.W Hutchinson et al.

Adv. Appl. Mech.

(1992)

J.W Menter et al.

C.A Nugebauer

T. Foecke, unpublished results,...

R.R Keller et al.

Mater. Sci. Eng. A

(1996)

J.S Koehler

Phys. Rev. B

(1970)

Cited by (266)

Effect of layer thickness on mechanical properties of Cu/CoCrFeNi nanolaminates: Implications from a quantitative flow stress model
2024, Journal of Materials Research and Technology
The excellent mechanical properties of metallic nanolaminates are closely related to the thickness of each individual layer (h). In this work, we comparatively investigated the effects of h on the mechanical properties of coherent Cu/CoCrFeNi and Cu/Ni nanolaminates under uniaxial compression using molecular dynamics simulations. It showed that with the decrease of h, the mechanical properties of the nanolaminates would be improved significantly. As h is decreased to a few nanometers, the flow stress of Cu/CoCrFeNi nanolaminates ascends to a plateau, while that of Cu/Ni nanolaminates descends. Two deformation mechanisms: dislocations slip constrained within layers and slip across interface, were revealed for the Cu/CoCrFeNi nanolaminates. Furthermore, the underlying mechanisms by which the Cu/CoCrFeNi and Cu/Ni nanolaminates exhibit different flow strength trends are revealed from the perspective of dislocation density. A model extended from the confined layer slip and interface barrier strength model was proposed to quantitatively estimate the flow stress of Cu/CoCrFeNi nanolaminates at different temperatures and strain rates. The results presented would be of great significance for the development and application of Cu/HEA nanolaminates.
The mechanical performance of optically tuned ceramic nanomultilayers
2023, Materials and Design
Multifunctional optical nanomultilayers (NMs) are needed for a wide array of applications, ranging from optical windows to electronic screens. Since the individual material constituents in optical coatings are often selected only for their desirable optical properties, mechanical characterization of the optical nanomultilayers is typically limited. Here, AlN/SiO₂, TiO₂/SiO₂, and AlN/Al₂O₃ nanomultilayers synthesized in non-optimized and optimized optical performance layer configurations are tested using microtensile, nanoindentation, and pillar splitting techniques to highlight the effects of optical optimization on mechanical performance. Trends within each type of test and across all deformation modes reveal that layer thickness, volume fraction, and interfacial crystallinity can be viewed as controlling features for optical and mechanical performance, although their correlation may vary. It was observed that both configurations of the AlN/Al₂O₃ NMs exhibit the highest mechanical performance across all three testing techniques with an average experimental transmittance of 93.8% for the optimized layer configuration. Overall, the results from this expanded view of mechanical properties in ceramic optical nanomultilayers suggest the possibility of tuning film characteristics for joint optimization of opto-mechanical nanomultilayered coatings.
Atomic-scale understanding of the structural evolution in TiN/AlN superlattice during nanoindentation—Part 2: Strengthening
2022, Acta Materialia
The mechanical properties of superlattice (SL) TMN (transition-metal nitrides) coatings with different as-deposited structures are often quite different. These differences in mechanical properties can be attributed to distinct deformation and strengthening mechanisms. Here, we discuss the strengthening mechanisms of single- and poly-crystalline SLs under nanoindentation loads. We observe that the dislocation behaviors during nanoindentation, such as dislocation accumulation and crossing interfaces, are responsible for the strengthening of single-crystalline SL coating, whereas no such pronounced strengthening is observed in the polycrystalline SL. We further reveal the monoclinic phase transformation occurring at the SL, solid solution zone, and crack tip region in the single-crystalline coating. Phase transformation alters the SL interface's structure, facilitating dislocation accumulation. Consequently, it raises the theoretical yield stress of single-crystalline coating. For polycrystalline coating, we observed a localized monoclinic phase present only near the crack tip. The current research unravels TMN SL strengthening mechanism at the atomic scale.
Strategies for damage tolerance enhancement in metal/ceramic thin films: Lessons learned from Ti/TiN
2022, Acta Materialia
Most functional microelectronic devices as well as hard coatings use brittle ceramics like Titanium Nitride (TiN) in nanostructured, thin film form. Damage tolerance is critical to their deployment in service, and life extension. In this study, we explore multilayering to enhance the damage tolerance of such material systems. Ti/TiN is a model metal/ceramic system with a strong interface, where elastic-plastic mismatch could potentially be used to modify the crack driving force. We carry out systematic numerical simulations of crack driving force in Ti/TiN multilayers with changing layer spacing. Micro-cantilever experiments are then carried out on a selected set of multilayers to determine the fracture toughness as a function of the number of interfaces. The 50 layer multilayer exhibits a fracture toughness that is 82% higher than the single layer TiN while maintaining a comparable hardness to the latter. The weak intercolumnar boundaries of sputtered films are found to be a limitation in fully exploiting the advantage of the shielding effect due to alternating stiff and compliant layers. The results are discussed in the context of design parameters for multilayering in metal/ceramic thin film systems in general.
Investigation on the incorporation of oxygen and thermal stability of HPPMS TiAlCrSiON nanolayer coatings
2021, Surface and Coatings Technology
Ternary hard coatings like TiAlN and CrAlN are used to improve the tool lifetime during cutting. The addition of silicon leads to a nanocomposite coating architecture with advantageous properties, like a higher oxidation stability and higher indentation hardness. The coating system TiAlCrSiON is a combination of TiAlN and CrAlN with added oxygen: This coating is not sufficiently studied yet. However, it has a great potential to improve the cutting performance and tool lifetime. In the current study, three different TiAlCrSiON nanolayer coatings were deposited by direct current magnetron sputtering/high power pulsed magnetron sputtering hybrid processes on an industrial coating unit using three different gas flow ratios of oxygen to nitrogen. Bases on these coatings the influence of the incorporation of oxygen into the TiAlCrSiON coatings on the coating process and properties as well as on the thermal and oxidation stability is studied. The morphology of the coatings was investigated by scanning electron microscopy and transmission electron microscopy. It becomes increasingly columnar, when oxygen is incorporated into the coating. The phase composition was examined by X-ray diffraction. The results indicate an incorporation of oxygen into the cubic crystal lattice. The coatings show a nanocomposite and a nanolayer coating architecture. The oxygen is distributed inhomogeneously over the coating thickness and homogeneously within the nanolayers. Moreover, the coatings were investigated by nanoindentation. When the oxygen content increases, the indentation hardness decreases from H_IT = (34 ± 2) GPa for the nitride Ti₂₁Al₁₇Cr₅Si₃N₅₄ coating to H_IT = (26 ± 2) GPa for the oxynitride Ti₂₃Al₁₃Cr₅Si₃O₂₁N₃₅ coating with a high oxygen content. The coatings show a high phase stability even at T = 1200 °C. The oxidation stability of the oxynitride coating with a high oxygen content is decreased T = 900 °C compared to the nitride coating.
Modeling the effects of individual layer thickness and orientation on the tribocorrosion behavior of Al/Cu nanostructured metallic multilayers
2021, Wear
Nanostructured metallic multilayers (NMMs) are emerging materials with excellent mechanical, tribological, and corrosion properties, making them ideal candidates to be used under extremely conditions. The high wear and corrosion resistance lead to enhanced tribocorrosion resistance of NMMs compared to many traditional metals and alloys. In this work, a multiphysics finite element model was developed to study the material deformation and degradation during tribocorrosion from wear, corrosion, as well as their synergy. Specifically, this model accounts for elastic-plastic mechanical deformation during wear and galvanic corrosion between exposed inner layers after wear. The effects of individual layer thickness (from 10 to 100 nm) and layer orientation (horizontally and vertically aligned) on the tribocorrosion behavior of Al/Cu NMMs was studied. Both factors were found to affect the subsurface stress and plastic strain distribution and localized surface corrosion kinetics, hence affecting the overall tribocorrosion rate. This model and the obtained understanding could shed light on future design and optimization strategies of NMMs against tribocorrosion.

View all citing articles on Scopus

View full text

Invited reviewDeformation and fracture in microlaminates

Abstract

Thin Solid Films

Acta. Metall. Mater.

Acta Metall. Mater.

Scr. Metall. Mater.

Scr. Metall. Mater.

Nanostruct. Mater.

Nanostruct. Mater.

Scr. Metall. Mater.

Scr. Metall. Mater.

Acta Metall.

Thin Solid Films

Thin Solid Films

Acta Metall.

Scr. Metall. Mater.

Surf. Coat. Technol.

Thin Solid Films

Thin Solid Films

Thin Solid Films

Thin Solid Films

Thin Solid Films

Scr. Metall. Mater.

Scr. Metall. Mater.

Acta. Metall. Mater.

Surf. Coat. Technol.

Surf. Coat. Technol.

J. Mech. Phys Solids

Acta Metall. Mater.

Acta Metall. Mater.

Acta Metall. Mater.

J. Mech. Phys. Solids

J. Mech. Phys. Solids

Acta Metall. Mater.

Mater. Sci. Eng.

J. Mech. Phys. Solids

Thin Solid Films

Mater. Sci. Eng.

Scr. Metall. Mater.

Philos. Trans. R. Soc. London, Ser. A

J. Am. Ceram. Soc.

Metall. Trans. A

CRC Crit. Rev. Solid State Mater. Sci.

Adv. Appl. Mech.

Mater. Sci. Eng. A

Phys. Rev. B

Invited review
Deformation and fracture in microlaminates