Abstract
For the past few years, In the research of intelligent monitoring of industrial equipment, deep learning is becoming a method that get the widespread concern of researchers. In general, the collection of a great quantity of typical data that has been labeled makes the deep learning approach a great success. However, it is often limited by real fault data samples, and the generalization ability of the established model is poor. A novel fault diagnostic method that we assemble data generation and fault diagnosis called ASM1D-GAN is proposed to address these problems. This method is composed of 1D convolutional neural network, Generative Adversarial Networks (GANs), and fault classifier. We assemble the data generation and fault diagnosis procedures together. Through a new antagonistic machine learning mechanism, the ASM1D-GAN model is optimized, so as to achieve higher sample quality and fault mode classification ability. This novel method can extract fault features from natural fault samples and generate effective new ones. The experimental results demonstrate the effective fault feature generation ability and the superior fault diagnostic ability of the proposed method.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
Change history
19 November 2019
The Publisher regrets an error on the printed front cover of the October 2019 issue. The issue numbers were incorrectly listed as Volume 91, Nos. 10-12, October 2019. The correct number should be: "Volume 91, No. 10, October 2019"
References
Liu, R., Yang, B., Zio, E., et al. (2018). Artificial intelligence for fault diagnosis of rotating machinery: A review[J]. Mechanical Systems and Signal Processing, 108, 33–47.
Luo B, Wang H, Liu H, et al. (2018). Early Fault Detection of Machine Tools Based on Deep Learning and Dynamic Identification[J]. IEEE Transactions on Industrial Electronics, PP(99):1–1.
Su, H., Qiu, M., & Wang, H. (2012). Secure wireless communication system for smart grid with rechargeable electric vehicles[J]. IEEE Communications Magazine, 50(8), 62–68.
Ya-Guo, L., & Zheng-Jia, H. (2011). Advances in applications of hybrid intelligent fault diagnosis and prognosis technique[j]. Journal of Vibration and Shock, 9, 030.
Cui, L., Huang, J., Zhang, F., & Chu, F. (2019). Hvsrms localization formula and localization law: Localization diagnosis of a ball bearing outer ring fault. Mechanical Systems and Signal Processing, 120, 608–629.
Hinton, G., Deng, L., Yu, D., Dahl, G. E., Mohamed, A. R., Jaitly, N., Senior, A., Vanhoucke, V., Nguyen, P., & Sainath, T. N. (2012). Deep neural networks for acoustic modeling in speech recognition: the shared views of four research groups. IEEE Signal Processing Magazine, 29, 82–97.
Jaitly, N., Hinton, G., (2011). Learning a better representation of speech soundwaves using restricted boltzmann machines, in: IEEE International Conference on Acoustics, Speech and Signal Processing, pp. 5884–5887.
Yin, W., Kann, K., Yu, M., et al. (2017). Comparative Study of CNN and RNN for Natural Language Processing[J].
Chen, K., Bui, T., Chen, F., et al. (2017). AMC: Attention guided Multi-modal Correlation Learning for Image Search[J].
Han, Q. I. U., Meikang, Q. I. U., Zhihui, L. U., et al. (2019). An efficient key distribution system for data fusion in V2X heterogeneous networks[J]. Information Fusion, 50, 212–220.
Russakovsky, O., Deng, J., Su, H., Krause, J., Satheesh, S., Ma, S., Huang, Z., Karpathy, A., Khosla, A., & Bernstein, M. (2015). ImageNet large scale visual recognition challenge. International Journal of Computer Vision, 115, 211–252.
Memisevic, R., Hinton, G., (2007). Unsupervised learning of image transformations, in: CVPR ‘07. IEEE Conference on computer vision and pattern recognition, pp. 1–8.
Shao, H., Jiang, H., Zhang, X., Niu, M., (2015). Rolling bearing fault diagnosis using an optimization deep belief network, Meas. Sci. Technol. 26 (11).
Shao, H., Jiang, H., Lin, Y., & Li, X. (2018). A novel method for intelligent fault diagnosis of rolling bearings using ensemble deep auto-encoders. Mechanical Systems and Signal Processing, 102, 278–297.
Guo, L., Li, N., Jia, F., Lei, Y., Lin, J., (2017). A recurrent neural network based health indicator for remaining useful life prediction of bearings, Neurocomputing 240 (C) 98–109.
Lei, J., Liu, C., & Jiang, D. (2019). Fault diagnosis of wind turbine based on Long Short-term memory networks. Renewable Energy, 133, 422–432.
Verstraete, D., Ferrada, A., Droguett, E. L., Meruane, V., & Modarres, M. (2017). Deep learning enabled fault diagnosis using time-frequency image analysis of rolling element bearings. Shock and Vibration, 2017, 1–17.
Si, J., Li, Y., & Ma, S. (2018). Intelligent fault diagnosis for industrial big data[J]. Journal of Signal Processing Systems, 90(8–9), 1221–1233.
Zhang, W., Peng, G., Li, C., Chen, Y., & Zhang, Z. (2017). A new deep learning model for fault diagnosis with good anti-noise and domain adaptation ability on raw vibration signals. Sensors, 17(2), 425.
Qiu, H., Noura, H., Qiu, M., et al. A User-Centric Data Protection Method for Cloud Storage Based on Invertible DWT[J]. IEEE Transactions on Cloud Computing, PP(99):1–1.
Liu, R., Meng, G., Yang, B., et al. (2017). Dislocated Time Series Convolutional Neural Architecture: An Intelligent Fault Diagnosis Approach for Electric Machine[J]. IEEE Transactions on Industrial Informatics, 13(3), 1310–1320.
Pan, J., Zi, Y., Chen, J., et al. (2017). LiftingNet: A Novel Deep Learning Network with Layerwise Feature Learning from Noisy Mechanical Data for Fault Classification[J]. IEEE Transactions on Industrial Electronics, 1–1.
Liao, L., Jin, W., & Pavel, R. (2016). Enhanced Restricted Boltzmann Machine With Prognosability Regularization for Prognostics and Health Assessment[J]. IEEE Transactions on Industrial Electronics, 63(11), 7076–7083.
Ince, T., Kiranyaz, S., Eren, L., et al. (2016). Real-Time Motor Fault Detection by 1D Convolutional Neural Networks[J]. IEEE Transactions on Industrial Electronics, 1–1.
Zhang, B., Li, W., Hao, J., et al. (2018). Adversarial adaptive 1-D convolutional neural networks for bearing fault diagnosis under varying working condition[J].
Chen, Y., Peng, G., Xie, C., et al. (2018). ACDIN: Bridging the gap between artificial and real bearing damages for bearing fault diagnosis[J]. Neurocomputing, S092523121830300X.
Goodfellow, I. J., Pouget-Abadie, J., Mirza, M., et al. (2014) Generative adversarial nets[C]// International Conference on Neural Information Processing Systems.
Radford, A., Metz, L. and Chintala, S., (2015). Unsupervised representation learning with deep convolutional Generative Adversarial Networks. arXiv preprint arXiv:1511. 06434.
Odena, A., Olah, C. and Shlens, J., (2016). Conditional image synthesis with auxiliary classifier GANs. arXiv preprint arXiv:1610.09585.
Lee, Y. O., Jo, J., Hwang, J., (2017). Application of deep neural network and generative adversarial network to industrial maintenance: A case study of induction motor fault detection[C]// 2017 IEEE International Conference on Big Data (Big Data). IEEE.
Lessmeier, C., Kimotho, J. K., Zimmer, D., et al. (2016). Condition Monitoring of Bearing Damage in Electromechanical Drive Systems by Using Motor Current Signals of Electric Motors: A Benchmark Data Set for Data-Driven Classification[C] //Proceedings of the European Conference of the Prognostics and Health Management Society. 05–08.07.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Gao, S., Wang, X., Miao, X. et al. ASM1D-GAN: An Intelligent Fault Diagnosis Method Based on Assembled 1D Convolutional Neural Network and Generative Adversarial Networks. J Sign Process Syst 91, 1237–1247 (2019). https://doi.org/10.1007/s11265-019-01463-8
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11265-019-01463-8