Abstract
This paper addresses the problem of designing an artificial finger with variable stiffness in its joints. Our approach is based on the principle of combining different means of actuation. Two different versions of variable-stiffness joints are presented and used in the design and manufacturing of three prototypes of gripper fingers. Diverse material configurations are used in order to determine which are the distinctive capabilities of each one and how they differ. In order to test the fingers we built a test bench that allows us to measure the movement of the tendon-driven actuation, the pressure of air actuation and the force that is deployed in the tip of the finger. Several tests are made to measure the relation between the actuation input and the force exerted by the fingertips. Our results suggest that the best mechanism to achieve variable stiffness in the joints is a soft-rigid hybrid finger.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Al Abeach, L.A.T., Nefti-Meziani, S., Davis S.: Design of a variable stiffness soft dexterous gripper. Soft Robot. J. 4(3), 274–284 (2017)
Pfeifer, R., Lungarella, M., Iida, F.: The challenges ahead for bio-inspired soft robotics Commun. ACM 55(11), 76 (2012)
Laschi, C., Rossiter, J., Iida, F., Cianchetti, M., Margheri, L.: Soft Robotics: Trends, Applications and Challenges Biosystems & Biorobotics, vol. 17. Springer (2017)
Hughes J., Culha U., Giardina F., Guenther F., Rosendo A., Iida, F.: Soft manipulators and grippers: a review. Front. Robot. AI 3, 69 (2016)
Rus D., Tolley T.: Design, fabrication and control of soft robots. Nature 521(7553), 467–475 (2015)
Culha, U., Hughes, J., Rosendo, A.L., Giardina, F., Iida, F.: Design principles for soft-rigid hybrid manipulators. Biosyst. Biorobotics 17, 87–94 (2017)
Yufei, H., Tianmiao, W., Xi, F., Kang, Y., Ling, M., Juan, G., Li, W.: A variable stiffness soft robotic gripper with low-melting-point alloy. In: Proceedings of the 36th Chinese Control Conference, pp. 6781–6786 (2017)
Yang, Y., Chen, Y.: 3D printing of smart materials for robotics with variable stiffness and position feedback. In: IEEE/ASME International Conference Advanced Intelligent Mechatronics, AIM, pp. 418–423 (2017)
Memar, A.H., Mastronarde, N., Esfahani, E.T., Design of a novel variable stiffness gripper using permanent magnets. In: IEEE International Conference Robotics and Automation, pp. 2818–2823 (2017)
Li, Y., Chen, Y., Yang, Y., Wei, Y.: Passive particle jamming and its stiffening of soft robotic grippers. IEEE Trans. Robot. 33(2), 446–455 (2017)
Firouzeh, A., Paik, J.: An under-actuated origami gripper with adjustable stiffness joints for multiple grasp modes. Smart Mater. Struct. 26(5), 055035 (2017)
Manti, M., Cacucciolo, V., Cianchetti, M.: Stiffening in soft robotics: a review of the state of the art. IEEE Robot. Automat. Mag. 23, 93–106 (2016)
Hogan, N.: Adaptive control of mechanical impedance by coactivation of antagonist muscles. IEEE Trans. Automat. Control 29(8), 681–690 (1984)
Migliore, S., Brown, E., DeWeerth, S.: Biologically inspired joint stiffness control. In: IEEE International Conference on Robotics and Automation, pp. 4508–4513 (2005)
arduino.cc, December 2017
Townsend, W.T.: The Barrett Hand grasper-programmably flexible part handling and assembly. Ind. Robot Int. J. 10(3), 181–188 (2010)
Acknowledgement
This paper describes research done at UJI RobInLab. Support for this research was provided by Ministerio de Economa y Competitividad (DPI2015-69041-R).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Cardin-Catalan, D., del Pobil, A.P., Morales, A. (2019). Analysis of Variable-Stiffness Soft Finger Joints. In: Strand, M., Dillmann, R., Menegatti, E., Ghidoni, S. (eds) Intelligent Autonomous Systems 15. IAS 2018. Advances in Intelligent Systems and Computing, vol 867. Springer, Cham. https://doi.org/10.1007/978-3-030-01370-7_27
Download citation
DOI: https://doi.org/10.1007/978-3-030-01370-7_27
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-01369-1
Online ISBN: 978-3-030-01370-7
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)