Open access peer-reviewed chapter

Fluorescent Markers in Water Treatment

Written By

Maxim Oshchepkov and Konstantin Popov

Submitted: 04 December 2017 Reviewed: 05 March 2018 Published: 19 September 2018

DOI: 10.5772/intechopen.76218

From the Edited Volume

Desalination and Water Treatment

Edited by Murat Eyvaz and Ebubekir Yüksel

Chapter metrics overview

1,431 Chapter Downloads

View Full Metrics

Abstract

Both phosphonate- and polymer-based scale inhibitors have a broad spectrum of applications in water treatment technologies. However, the “online” monitoring of antiscalant content in an aqueous phase is still a challenge for researchers. A possible solution is provided by the fluorescent markers added to the feeding water. These can be either an antiscalant tagged or may represent the independent species. The review summarizes both the advantages and the drawbacks of these approaches along with such markers’ classification, with a special emphasis on the novel fluorescent-tagged phosphonates. Besides, some unique opportunities provided by the fluorescent-tagged antiscalants for reverse osmosis membrane mapping, scale inhibition traceability, and a scale inhibitor localization in a circulation water facility are also considered and discussed.

Keywords

  • scale inhibition
  • fluorescent markers
  • water treatment

1. Introduction

Fluorescence is the emission of light by a substance that has absorbed light with a different wavelength or electromagnetic radiation. It has many practical and valuable applications, including in mineralogy, gemology, medicine, chemical sensors (fluorescence spectroscopy), fluorescent labeling, dyes, biological detectors, environmental monitoring, cosmic-ray detection, and, most commonly, fluorescent lamps [1, 2, 3, 4, 5]. However, in the field of water treatment, it has gained increasing interest mostly in the last decade [6, 7, 8]. The water treatment technologies use fluorescence phenomenon for the oil component control in wastewater [9], gaseous oxygen monitoring in wastewater [10], water leaks in industrial pipelines [11], for the total bacterial count [12], and for online scale inhibitors’ content monitoring [6, 7, 8, 13]. Besides, the problem of a scale inhibition mechanism is still actual and requires applications of fluorescent-tagged inhibitors [14]. All these applications are to be considered in a recent review.

Advertisement

2. Fluorescent monitoring of a scale inhibitor content

Scale formation in the upstream oil and gas industry, reverse osmosis desalination processes, steam generators, boilers, cooling water towers, and pipes is a serious problem, causing significant plugging of wells, pipelines, membranes, and increasing the production cost [15]. A widely used technique for controlling scale deposition is an application of chemical inhibitors [16, 17]. Commonly used commercial antiscalants are represented by chemical families: polyphosphates (hexametaphosphate (HMP), tripolyphosphate (TPP), etc.), organophosphonates (aminotris(methylenephosphonic acid), ATMP; 1-hydroxyethane-1,1-bis(phosphonic acid), HEDP; 2-phosphonobutane-1,2,4-tricarboxylic acid (PBTC); ethylenediaminetetra(methylenephosphonic acid), EDTPH, etc), and organic polyelectrolytes (polyacrylates (PA), polycarboxysulfonates, (PCS)). Among these, the organophosphonates are dominating the world market at present. At the same time, phosphorus-based inhibitors are hardly biodegradable and persist for many years after their disposal, which lead to eutrification problems. Phosphorus discharges are therefore regulated in many countries worldwide, and permissible limits are constantly decreasing [18].

Increasing environmental concerns and discharge limitations have forced the scale-inhibitor chemistry to move toward “green antiscalants,” that are readily biodegradable and have minimal environmental impact [17, 18]. Intensive efforts have been applied recently to develop the “green” alternatives to organophosphonates and nonbiodegradable polyacrylates. Among these novel inhibitors, such chemicals as polymaleates (PMAs), polyaspartates (PASPs), polyepoxysuccinates (PESAs), as well as their various derivatives, including co-polymers with PA, are worth mentioning [19, 20].

The concentration of polymeric antiscalants in the circulating system is usually changed by evaporation of water, reagent sorption on the pipe surfaces, and by a periodical discharge of the circulating water with some deposit. Therefore, an adequate monitoring of the polymer concentration is needed to minimize the consumptions of both scale inhibitor and water. Along with conventional monitoring methods based on UV–vis or potentiometry, the intensity of fluorescence emitted from either indifferent markers or a covalently bound to polymer tracer becomes a matter of choice [6].

The conventional monitoring methods for PA and for other polymeric antiscalants are classified into four groups [21]: (i) monitoring a spectral change caused by the interaction of PA with some metal-reagent complex (e.g., Fe3+− SCN [22], Hg+–diphenylcarbazide [21]);(ii) monitoring the concentration of an inert tracer added in proportion to PA by potentiometry or spectrophotometry (e.g., Li+, K+, Br, I, transition metal ion, dye) [23, 24, 25]; (iii) monitoring the intensity of fluorescence emitted from a tag covalently bound to PA [26, 27], and (iv) monitoring a change in spectroscopic characteristic on the interaction of PA with a metachromic or fluorochromic dye or a change in turbidity on the interaction of PA with a cationic surfactant [28, 29, 30, 31]. Each of the abovementioned approaches has both advantages and the drawbacks. Indeed, the light absorption of PA complexes can be masked by the corrosion byproducts (formation of iron and copper complexes), by water background cation (iron, calcium, magnesium, copper) complexes formation, as well as by calcium carbonate and calcium sulfate colloid formation. At the same time, the indifferent markers do not guarantee the correct PA concentration indication. Due to the differences in chemical properties of PA and a marker, the latter could have a different sorption ability relative to PA in a particular system. Therefore, the marker can provide either overestimation or an underestimation of PA content with a sequence of time. The PA-tagged fluorescent markers are treated as more reliable, although the more expensive solution [6]. Besides there is a risk of the PA antiscaling ability change due to the fluorescent fragment implementation. Thus, the chemical behavior of PA and of a corresponding PA-tagged fluorophore would be somehow different.

Recently, all the publications on the covalent binding of a fluorophore fragment to the antiscalant molecule are restricted by either the polyacrylate or polyaspartate moieties [6, 7, 8, 13, 32, 33, 34, 35, 36]. Any reports on the fluorescent-tagged phosphonate-based antiscalants are missing, although the online phosphonate monitoring is no less actual.

2.1. Inert tracers added to polymeric antiscalants

Irrespective of a broad spectrum of the commercially available fluorescent dyes, the number of reagents that have a high quantum yield in an aqueous medium is relatively small [37]. It should be noted that the fluorescence intensity strongly depends on pH, background cation concentration, and bioimpurities, normally present in the circulating systems. Besides, some dyes may change the color of industrial water. Therefore, it is desirable to use those reagents that have maximal light absorption in the ultraviolet spectral range, while the emission spectrum is likely to correspond to the visible blue light.

Usually the fluorescent marker molecules combine sulfo-1,8-naphtalimide with some carboxylate or sulfo-groups to provide an aqueous solubility (fluorescein, rhodamine, sodium 1,3,6,8-pyrenetetrasulfate) [38, 39, 40]. These reagents have high quantum yield, chemical, and photostability [11, 41] as shown in Table 1. Besides, Kurita Water Industries Ltd. offers a 2-phenylbenzimidazole as a marker [42], while Kemira Oyj proposes a lanthanoid-based tracer [43].

Table 1.

The excitation and emission properties of fluorescein and of 1,3,6,8-pyrene tetrasulfonic acid tetrasodium salt [11, 41].

2.2. Fluorescent-tagged scale inhibitors

An antiscaling ability of fluorophore-tagged polymers relative to their non-tagged analogues was reported in a very few studies [6, 44, 45, 46], as shown in Table 2. Usually the implementation of a fluorophore fragment either does not change the inhibitor efficacy or even provides some enhancement.

Fluorescent-tagged scale inhibitors *Concentration scale inhibitors, mg·dm−3Inhibitor efficacy, %Reference
CaCO3scale
PA-F11049 ± 3[6]
PA-F21051 ± 2[6]
MA-AA-F11044 ± 2[6]
MA-AA-F21054 ± 2[6]
PA1070 ± 2[6]
FPASP690[44]
PASP670[44]
CaSO4scale
PA-F11073 ± 3[6]
PA-F21078 ± 2[6]
MA-AA-F11061 ± 2[6]
MA-AA-F21065 ± 2[6]
PA1058 ± 2[6]
AA–APEM–APTA996[45]
AA–APEM995[45]
PAA985[45]
Ca3(PO4)2scale
FPASP1295[46]
PASP1230[46]

Table 2.

An antiscaling ability of fluorophore-tagged polymers relative to their non-tagged analogues.

PA-F1: co-polymer acrylic acid–N-allyl-4-methoxy-1,8-naphtalimide. PA-F2: co-polymer acrylic acid–N-allyl-2-(6-hydroxy-3-oxo-3H-xanthen-9-yl)benzamide (N-allylamidefluorescein). MA-AA-F1: co-polymer acrylic acid–fumaric acids–N-allyl-4-methoxy-1,8-naphtalimide. MA-AA-F2: co-polymer acrylic acid–fumaric acids–N-allyl-2-(6-hydroxy-3-oxo-3H-xanthen-9-yl)benzamide (N-allylamidefluorescein). PA: Na-salt of polyacrylic acid (Shandong TaiHe Water Treatment Co.Ltd.). FPASP: fluorescent polyaspartic acid was synthesized with partially ethanolamine-modified polysuccinimide, p-toluenesulfonyl chloride and 3-amino-9-ethyl carbazole. AA–APEM–APTA: co-polymer acrylic acid–oxalic acid–allylpolyethoxy carboxylate–8-hydroxy-1,3,6-pyrene trisulfonic acid trisodium salt (pyranine). AA–APEM: co-polymer acrylic acid–oxalic acid–allylpolyethoxy carboxylate. PAA: poly(acrylic acid), MW 1800 Da.

However some more experimental work has to be done in this field to make the situation clear.

Only a single paper reports on the influence of the background cations on the quantum yield of an antiscalant [6], as shown in Table 3. The corresponding data clearly indicate that cations can either increase or sufficiently diminish the fluorescence intensity of some reagents, while some others stay insensitive to this influence. Anyhow this property has to be taken into account for any particular application of a tracer.

Inhibitor, 10 mg·dm3Cation
Ca2+Mg2+Zn2+Сu2+Fe3+
Cation concentration, mg·dm−3
20200101002200.550.33
Fluorescence intensity change relative to the cation-free solution, %
PA-F1100 ± 193 ± 1100 ± 1100 ± 197 ± 196 ± 191 ± 174 ± 199 ± 194 ± 1
PA-F258 ± 143 ± 166 ± 162 ± 185 ± 142 ± 196 ± 148 ± 1108 ± 194 ± 1
MA-AA-F181 ± 171 ± 191 ± 184 ± 193 ± 185 ± 190 ± 174 ± 194 ± 162 ± 1
MA-AA-F287 ± 181 ± 1100 ± 1138 ± 193 ± 190 ± 188 ± 169 ± 192 ± 160 ± 1

Table 3.

The dependence of inhibitor fluorescence intensity on inorganic cation concentration (pH 8.0, 25°C) [6].

A covalent implementation of the fluorescent fragment into the polymer moiety can be performed in two ways. The first one assumes an attachment along with the polymer formation process. Another one is based on the fluorophore binding to the readymade polymer matrix. The first approach is used for the radical involved synthesis of co-polymers bearing carboxylate, sulfonic, or polyalkylenoxyde groups (acrylic, methacrylic, or maleic acids) and the dyes with an active double bond. The reaction runs in an aqueous solution being initiated by persulfates, by H2O2, benzoylperoxide, or by 2,2′-azobisisobutyronitrile (0.1–1.0%, mass). Also, such molecular mass regulators as sulfur compounds [47] or sodium hypophosphite are used [48]. These regulators keep the molecular masses within 2000–200,000 Da. The low molecular mass Mw of a polymer (1000 Da < Mw < 10,000 Da) is known to provide the most effective scale inhibition.

Generally, the fluorescent markers should meet the following requirements: (i) synthetic availability of the dyes capable for polymerization; (ii) a dye chemical stability during polymerization; (iii) a minimal influence of a dye on the polymer structure and on its Mw; (iv) the polymer structure, which should not affect the optical properties of a marker.

Fluorescent monomers used for a scale inhibitor implementation could be classified into three main categories: (i) aromatic hydrocarbons and their derivatives, for example, polyphenilic hydrocarbons, hydrocarbons with arylethylene or arylacetylene groups, and so on; (ii) heterocyclic monomers; and (iii)monomers with a carbonyl group.

Polyphenylhydrocarbons demonstrate an intensive fluorescence within a violet-to-blue visible spectrum region. Among these there are vinylanthracene (Rhodia Operations) [49], potassium 2-alkyloxonaphtyl-6,8-disulfonate (China National Offshore Oil Corp.) [50], 2-allyldibenzosuberenol, and 9-allyl-9-hydroxyanthrene (Kurita Water Industries Ltd.) [51], as shown in Figure 1.

Figure 1.

9-vinyl anthracene (a), 2-allyldibenzosuberenol (b), and 8-(allyloxy)-1,3,6-pyrene trisulfonic acid (c) chemical structures.

Numerous research groups synthesize a marker monomer via the 8-hydroxypyrene-1,3,6-trisulfonic acid (pyranine) interaction with allylchloride (Figure 1c) [52, 53]. Such a monomer reveals an intensive fluorescence with a maximum at 431 nm. Quantum yield is high. It depends on pH and varies within 80–90%. Then, these fluorescent monomers are co-polymerized (radical polymerization) with an antiscalant-forming monomers, for example, acrylic acid and so on. (Scheme 1) [8].

Scheme 1

Preparation of co-polymer acrylic acid-oxalic acid-allylpolyethoxy carboxylate-8-hydroxy-1,3,6-pyrene trisulfonic acid trisodium salt.

A co-polymerization of the pyranine-based monomers with maleic anhydride is also possible [35, 53, 54, 55, 56]. The fluorescence intensity of an antiscalant correlates well with the fluorophore content in the scale inhibitor (R~0.99), while the detection limit ranges from 1 to 2 mg·dm3 [35, 53, 54, 55, 56]. Among the numerous water treatment reagents developed by Nalco Chemical Co. there are two fluorescent monomers of the pyranine group [57], as shown in Figure 2.

Figure 2.

Nalco fluorofores for a covalent attachment to the scale inhibitors [57]; M = H+, NH4+, K+, Na+, Cs+, Rb+, Li+; n = 1, 2, 3, 4, 6 or 9.

Besides antiscalants, these monomers can also be implemented into some biocides. However, the Nalco Chemical Co. also uses some inert tracers along with the polymer-tagged ones.

Another important group of fluorophore monomers is represented by 5- and 6-member heterocycles [44, 49], particularly by a vinylimidazolic monomer [58], as shown in Figure 3.

Figure 3.

Vinylimidazolic monomer structure; R, R1, and R2 are denoted as H, alkyl, aryl, phosphate, nitrate, or sulfate groups.

Among the fluorophores with a carbonyl group, it is reasonable to mention an inhibitor with a fluorescence fragment dimethyl-(4-(7-methoxylcoumarin))-methyl-(acryloyloxy)-ethyl-ammonium bromide [59], as shown in Figure 4. It reveals the maximal fluorescence intensity at 390 nm.

Figure 4.

An antiscalant with a dimethyl-(4-(7-methoxylcoumarin))-methyl-(acryloyloxy)-ethyl-ammonium bromide fragment [59].

Several publications report on the naphthalic acid-based markers for biochemical analysis application [60, 61]. An interest in these reagents is associated with both synthetic availability of some valuable 1,8-naphthalimide derivatives and with promising optical properties [62, 63, 64]. Ecolab Inc. (USA) has proposed fluorescent monomers derived from 3,4-7H-benzo[d,e] anthracenedicarboxylic acid for the antiscalant labeling [65]. Among these N-(3-N′,N′-Dimethylaminopropyl)benzo(k,l)xanthene-3,4-dicarboxylic imide of 2-hydroxy-3-allyloxypropyl quaternary salt seems to be the most interesting, as shown in Figure 5.

Figure 5.

N-(3-N′,N′-Dimethylaminopropyl)benzo(k,l)xanthene-3,4-dicarboxylic imide of 2-hydroxy-3-allyloxypropyl quaternary salt [65].

A considerable attention is paid to the 1,8-naphthalimide derivatives in relevance to the desalination processes (reverse osmosis) [66, 67, 68], as shown in Figures 6 and 7.

Figure 6.

Some 1,8-naphthalimide-tagged antiscalants [66, 67].

Figure 7.

Some 1,8-naphthalimide-based fluorophore monomers developed by Nalco for antiscalant labeling [68].

An implementation of a fluorophore into a PASP molecule is normally performed not via co-polymerization but by its attachment the already formed polymer molecule [46, 69, 70]. Some authors propose 3-amino-9-ethylcarbazole [71] or N-(2,3-epoxypropyl)carbazole [72] for the PASP molecule labeling, as shown in Figure 8.

Figure 8.

3-amino-9-ethylcarbazole (a) and N-(2,3-epoxypropyl)carbazole (b) fluorophore structures.

A special attention has to be paid to the communication, where a fluorescence of the inhibitor itself (carboxymethyl ammonium olygochitosan) is reported [73]. This antiscalant does not need any fluorescent marker attachment. The corresponding synthetic method is presented in Scheme 2.

Scheme 2.

Carboxymethyl quaternary ammonium oligochitosan synthesis.

It was found that the fluorescence intensity increases under acidic conditions. Thus, the hydrogen bonding and the electrostatic repulsion provide a rigid and densely stabilized structure formation, which is necessary for inducing fluorescence. Hence, the fluorescence of carboxymethyl quaternary ammonium oligochitosan may have been caused by the effect of the n → π* transition between -C=O- and -NH- and the special rigid structure formed by hydrogen bonding and a charge–charge repulsion [73]. The fluorescence maximum corresponds to 460 nm, while the detection limit at pH 5–9 is within 0.61 mg·dm3.

2.3. Visualization of scale inhibition mechanisms

Irrespective of the broad, successful, and long-term antiscalant applications, the mechanisms of scale inhibition still appear in the matter of discussions [14, 74, 75, 76, 77, 78, 79, 80, 81]. In this sense, the fluorophore-tagged antiscalants can provide the unique and amazing opportunities to get a deep insight of the scale inhibition mechanisms. As far as we know, recently, such reports on the scale inhibition visualization are missing. However, our research group managed to synthesize a conjugate of 1,8-naphthalimide and HEDP: 1-hydroxy-7-(6-methoxy-1,3-dioxo-1H-benzo[de]isoquinolin-2(3H)-yl)heptane-1,1-diyldi(phosphonic acid), (HEDP-F), as shown in Figure 9a. This reagent was tested as an antiscalant in gypsum scale formation experiments performed according to NACE protocol [82]. According to this protocol, a calcium-containing brine and a sulfate-containing brine are mixed to form a supersaturated gypsum aqueous solution in the presence of 0.5–15 mg·dm3 of an inhibitor at ambient temperature. Then, this solution is kept for 24 h at 71°C, cooled, and analyzed for residual calcium content by EDTA titration. In a parallel run, the gypsum crystals have been isolated and analyzed with a fluorescence scanning microscope, as shown in Figure 9b.

Figure 9.

HEDP-F (a) and an image of a Gypsum crystal, isolated in presence of HEDP-F (b); laser scanning microscope LSM-710 Carl Zeiss, lambda mode with 458 nm excitation; 26.10.2017. Data presented by Semen Kamagurov, Sergey Tkachenko and Maxim Oshchepkov.

Unlike the scanning electron microscopy, the fluorescence provides a unique possibility to look inside the crystal. Therefore, all the steps of crystal formation become visible. One can see that the bright crystal rod (“lightsaber”), initially formed by nanoparticles, is completely covered with HEDP-F. Then, this rod becomes the center of gypsum layers’ growth without any resistance or involvement of a HEDP-F antiscalant (massive dark layer). Finally, after the gypsum crystal formation is finished, the residual HEDP-F molecules get adsorbed on its surface, particularly at the edges of a crystal lattice, forming the outer layer. This is indicated by green spots and stripes1. Evidently, these data reveal a mechanism, significantly different from the conventional ones [74, 75, 76, 77, 78, 79, 80, 81]. By all means the visualization of scale inhibition mechanisms by fluorescent-tagged antiscalants seems to become a very promising tool of the scale inhibition theory development.

Besides, these reagents can provide some unique opportunities for reverse osmosis membrane mapping, scale inhibition traceability in the pipes, and a scale inhibitor localization in a circulation water facility.

Advertisement

3. Gaseous oxygen monitoring in wastewater

Biological treatment of wastewater includes activated sludge aeration. This in turn raises a problem of the gaseous oxygen content monitoring. One of the most promising solutions here is the fiber-optic oxygen sensor application. This method is based on the ability of oxygen molecules to suppress the luminescence of some luminofores [10, 83]. A fruitful application of some pyrene- or decacylene-based fluorophores along with some ruthenium complexe is reported: (Ru(bpy)3, Ru(phen)3, [Ru(dpp)2Phen]2+ (dpp = 4, 7-diphenyl-1,10-phenanthroline, Phen = 1,10-phenanthroline) [84], as shown in Figure 10. Also some terbium(III) complexes have been immobilized on aluminum oxide (Tb(acac)3phen), where acac-acetylacetone [85], as shown in Figure 11, as well as some porphyrin complexes of Pt and Pd [86], is worth mentioning.

Figure 10.

Structure of [Ru(dpp)2Phen]2+.

Figure 11.

Structure of Tb(acac)3phen.

The emitted blue light (~ 475 nm) of a photogenerator excites the fluorescence of a specially selected chemical complex, placed at the end of a fiber-optic oxygen sensor (sol–gel matrix). The exited complex generates fluorescence with a wavelength which is around 600 nm. This fluorescence gets suppressed by the oxygen present in a sample [87, 88, 89]. This provides an effective oxygen concentration measurement in water within the range from 0 to 40.7 ppm [90].

Advertisement

4. Fluorescent total ATP count in wastewaters

The total bacterial count in wastewater is based on bioluminescence. Normally it is used for the industrial and wastewater quality assessment, while for the drinking water it is not so common. The method is known since 1947, when McElroy has demonstrated that bioluminescence of a glowworm is closely associated with adenosine triphosphate (ATP) content [91]. Thus, the measurement of ATP provides an efficient indication of bacterial pollution of water according to Scheme 3 [12]:

Scheme 3.

Bioluminescent reaction catalyzed by firefly luciferase.

Analysis involves the firefly luciferase-luciferin system. Its contact with ATP molecules generates the “cold” light, counted by a luminometer within 15–20 s. The sensitivity of analysis is very high. It provides detection of 10–17 ATP moles per liter. Recently, there have been some standard solutions for luminometers present at the market: EnSURE™, SystemSURE Plus™ Clean Trace™, NovaLum™, Firefly 2™, Accupoint™, russian-made LYUM-1, Lumitester PD-20™ etc. [92].

Advertisement

5. Other applications

Some water treatment facilities require the oil component control in wastewater [9, 93]. Organic pollutants can occur in the cooling water, in the technical-use water, in a boiler-feeding water, and due to the leaks of oils into the steam condensate. For online pollutants’ monitoring, the fluorescent sensors are broadly used. The method is highly sensitive. Depending on the type of oil, the detection limits may vary from 1 to 100 ppm. Most of the oils contain some polycyclic aromatic hydrocarbons (PAHs) [94], capable of generating blue or violet fluorescence being exposed to UV irradiation. Usually the excitation light wavelength corresponds to 254 nm, while the detection operates in a 360 nm spectrum range.

Finally, one of the first known applications of fluorophores in water treatment should be mentioned. It is associated with water leaks detection in industrial pipelines. To solve this problem, some fluorescent indicators, for example fluorescein, have been merely added to the circulating water [11].

Advertisement

6. Conclusions

The fluorescent markers added to the circulating water or wastewaters find a broad spectrum of analytical applications for online quality monitoring. The most promising and a fast-developing field is a scale inhibitor concentration detection via antiscalant-tagged reagents. At the same time the visualization of scale inhibition mechanisms by the fluorescent-tagged antiscalants is a very promising tool of the scale inhibition theory development. Besides, these reagents can provide some unique opportunities for reverse osmosis membrane mapping, scale inhibition traceability, and a scale inhibitor localization in a circulation water facility.

Advertisement

Acknowledgments

The authors would like to thank the Russian Foundation for Basic Research (Project No. 17–08-00061).

Advertisement

Conflict of interest

For the present study, no economic interest or any conflict of interest exists.

References

  1. 1. Duval R, Duplais C. Fluorescent natural products as probes and tracers in biology. Natural Product Reports. 2017;34:161-193. DOI: 10.1039/C6NP00111D
  2. 2. Drummen GPC. Fluorescent probes and fluorescence (microscopy) techniques — Illuminating biological and biomedical research. Molecules. 2012;17:14067-14090. DOI: 10.3390/molecules171214067
  3. 3. Lange J, Olsson O, Sweeney B, Herbstritt B, Reich M, Alvarez-Zaldivar P, Payraudeau S, Imfeld G. Fluorescent tracers to evaluate pesticide dissipation and transformation in agricultural soils. Science of the Total Environment. 2018;619-620:1682-1689. DOI: 10.1016/j.scitotenv.2017.10.132
  4. 4. Arenas-Vivo A, Beltran FR, Alcazar V, de la Orden MU, Martinez UJ. Fluorescence labeling of high density polyethylene for identification and separation of selected containers in plastics waste streams. Comparison of thermal and photochemical stability of different fluorescent tracers. Materials Today Communications. 2017;12:125-132. DOI: 10.1016/j.mtcomm.2017.07.008
  5. 5. Jiangli F, Suzhen W, Wen S, Shigang G, Yao K, Jianjun D, Xiaojun P. Anticancer drug delivery systems based on inorganic nanocarriers with fluorescent tracers. American Institute of Chemical Engineers Journal Ahead of Print. 2017. DOI: 10.1002/aic.15976
  6. 6. Popov K, Oshchepkov M, Kamagurov S, Tkachenko S, Dikareva Y, Rudakova G. Synthesis and properties of novel fluorescent-tagged polyacrylate-based scale inhibitors. Journal of Applied Polymer Science. 2017;134:45017. DOI: 10.1002/APP.45017
  7. 7. Zhenling S, Xin Z, Puyu Z. Preparation of fluorescent polyaspartic acid and evaluation of its scale inhibition for CaCO3 and CaSO4. Polymers for Advanced Technologies. 2017;28:367-372. DOI: 10.1002/pat.3897
  8. 8. Guangqing L, Xue M, Yuming Z. Fluorescent-tagged block copolymer as an effective and green inhibitor for calcium sulfate scales. Russian Journal of Applied Chemistry. 2016;89:1861-1868. DOI: 10.1134/S1070427216110185
  9. 9. Ruhala SS, Zarnetske JP. Using in-situ optical sensors to study dissolved organic carbon dynamics of streams and watersheds: A review. Science of the Total Environment. 2017;575:713-723. DOI: 10.1016/j.scitotenv.2016.09.113
  10. 10. Allen CB, Schneider BK, White CJ. Limitations to oxygen diffusion in in vitro cell exposure systems in hyperoxia and hypoxia J. American Journal of Physiology-Lung Cellular and Molecular Physiology. 2001;281:L1021-L1027. DOI: 10.1152/ajplung.2001.281.4.L1021
  11. 11. Sabnis RW. Handbook of Fluorescent Dyes and Probes. 1st ed. Hoboken, NJ, USA: John Wiley & Sons, Inc; 2015. DOI: 10.1002/9781119007104
  12. 12. Guardigli M, Lundin A, Roda A. “Classical” applications of Chemiluminescence and bioluminescence. In: Roda A, editor. Chemiluminescence and Bioluminescence: Past, Present and Future. Royal Society of Chemistry; 2010. pp. 143-190. DOI: 10.1039/9781849732024-00141
  13. 13. Jiao CL, Wu YF, Hou CY, Cheng GC, Wu DX, Xu X, Yin JH. Determine the consumption of fluorescent scale inhibitor SC260 using Dibenzofuran-2-sulfonic acid hydrate. Advanced Materials Research. 2014;997:247-250. DOI: 10.4028/www.scientific.net/AMR.997.247
  14. 14. Popov KI, Oshchepkov MS, Shabanova NA, Dikareva YM, Larchenko VE, Koltinova EY. DLS study of a phosphonate induced gypsum scale inhibition mechanism using indifferent nanodispersions as the standards of a light scattering intensity comparison. International Journal of Corrosion and Scale Inhibition. 2018;7:9-24. DOI: 10.17675/2305-6894-2018-7-1-2
  15. 15. Amjad Z, editor. The Science and Technology of Industrial Water Treatment. Boca Raton Florida: CRS Press; 2010. p. 530
  16. 16. MacAdam J, Parsons SA. Calcium carbonate scale formation and control. Reviews in Environmental Science and Biotechnology. 2004;3:159-169. DOI: 10.1007/s11157-004-3849-1
  17. 17. Popov KI, Kovaleva NE, Rudakova GY, Kombarova SP, Larchenko VE. Recent state-of-the-art of biodegradable scale inhibitors for cooling water treatment applications (review). Thermal Engineering. 2016;63:122-129. DOI: 10.1134/S0040601516010092
  18. 18. Hasson D, Shemer H, Sher A. State of the art of friendly “green” scale inhibitors: A review article. Industrial and Engineering Chemistry Research. 2011;50:7601-7607. DOI: 10.1021/ie200370v
  19. 19. Popov K, Rudakova G, Larchenko V, Tusheva M, Afanas’eva E, Kombarova S, Kamagurov S, Kovaleva N. A comparative performance ranking of some phosphonates and environmentally friendly polymers on CaCO3 scaling inhibition by NACE protocol. Desalination and Water Treatment. 2017;69:163-172. DOI: 10.5004/dwt.2016.0336
  20. 20. Pervov A, Andrianov A, Rudakova G, Popov K. A comparative study of some novel “green” and traditional antiscalants efficiency for the reverse osmotic Black Sea water desalination. Desalination and Water Treatment. 2017;73:11-21. DOI: 10.5004/dwt.2017.20363
  21. 21. Yuchi A, Gotoh Y, Itoh S. Potentiometry of effective concentration of polyacrylate as scale inhibitor. Analytica Chimica Acta. 2007;594:199-203. DOI: 10.1016/j.aca.2007.05.049
  22. 22. Glukhova LY, Perov PA. Spectrophotometric method for the determination of an acrylic acid-acrylamide copolymer in highly mineralized waters. Khimiya i Tekhnologiya Vody. Soviet Journal of Water Chemistry and Technology. 1981;3:236-237. ISSN: 0204-3556
  23. 23. Hoots JE, Hunt BE. Monitoring chemical treatment with fluorescent tracers. U.S. Patent. US4783314 A 19881108; 1988
  24. 24. Hoots JE, Banks RH, Johnson DA. Transition metals as chemical tracers in aqueous systems. U.S. Patent. US4966711 A 19890227; 1990
  25. 25. Yoshimura S, Kuzumaki S, Imahama T. Method for controlling concentration of chemicals added to industrial water. JPN Patent. JP2788354B2; 1991
  26. 26. Myers RR, Fink JE. Method for the colorimetric determination of polycarboxylates in aqueous systems. U.S. Patent. US4894346A; 1990
  27. 27. Hoots JE, Pierce CC, Kugel RW. Monitoring and in-system concentration control of polyelectrolytes in waters using fluorochromatic dyes. U.S. Patent. US5389548A; 1995
  28. 28. Ma J, Sun Y, Yu Z. High-efficiency phosphorus-free corrosion and scale inhibition dispersion agent, preparation method thereof and application thereof. PRC Patent. CN102139967B; 2012
  29. 29. Tong Z, Chu C, Fan E, Sha Z. High-efficiency low-phosphorus corrosion and scale inhibiting dispersant and its preparation method. PRC Patent. CN102745825A; 2012
  30. 30. Fong DW, Hoots JE. Fluorescent group-tagged acrylic polymers and their synthesis by post-polymerization (trans)amidation. U.S. Patent. US5128419; 1992
  31. 31. Kira M, Kobayashi N. Agent for water treatment containing a polymer for water treatment and a process for producing said polymer. U.S. Patent. US5635575; 1997
  32. 32. Hoots J, Burkart C, Paulson S. Tracing process problems. Chemical Engineering Progress. 2002;98:66-70
  33. 33. Zeiner KEH, Ho B, Williams KD. Novel antiscalant dosing control. Desalination. 2003;157:209-216. DOI: 10.1016/S0011-9164(03)00400-4
  34. 34. Vazques O, Mackay E, Tjomsland T, Nygard O, Storas E. Use of tracers to evaluate and optimize scale squeeze treatment design in the Norne field. SPE Production and Operations. 2014;29:5-13. DOI: 10.2118/164114-PA
  35. 35. Wu K, Chen F, Liu Y, Luo J. Preparation and properties of β-cyclodextrins polymer used as calcium carbonate scale inhibitor containing fluorescent groups. Research on Chemical Intermediates. 2014;41:7617-7630. DOI: 10.1007/s11164-014-1847-7
  36. 36. Wang J, Peng Y, Guo W, Ji R, Zhao L, Jia Y, Gao C. Characterization of Tinopal CBS-X as a fluorescent tracer in cooling water. Instrumentation Science and Technology. 2016;45:301-311. DOI: 10.1080/10739149.2016.1237367
  37. 37. Lakowitz JR. Principles of Fluorescence Spectroscopy. 3rd ed. New York: Springer; 2006
  38. 38. Feng H, Luo R, Shang W, Zhang L, Zhang W. Phosphorus-free corrosion and scale inhibitor. PRC Patent. CN101767885B; 2011
  39. 39. Ito M, Ichikawa S, Kashimura H. Method For Stabilizing Fluorescence Intensity Of Rhodamine-Based Fluorescent Material. JPN Patent. JP5297851B2; 2013
  40. 40. Xu Guangming, Chen Jun, Lv Zhen, Chen Bo, He Gongzhe, Shi Yadong, Zhang Feiyan, Zhu Di, Guan Yuntao, He Kai. Scale and corrosion inhibitor. PRC Patent. CN103319010A; 2013
  41. 41. Tran-Thi T-H, Prayer C, Millie P, Uznanski P, Hynes JT. Substituent and solvent effects on the nature of the transitions of pyrenol and pyranine. Identification of an intermediate in the excited-state proton-transfer reaction. The Journal of Physical Chemistry. 2002;106:2244-2255. DOI: 10.1021/jp0125606
  42. 42. Hajime I, Mayumi K, Kanji N. Concentration control method for water-based additive. Jpn patent. JPH09178662A; 1997
  43. 43. Nuutinen V, Toivonen S, Johnstone J, Harma H, Lehmusto M, Tiittanen S, Vaisanen P, Siivonen J, Mundill P. Method for analyzing a sample comprising at least a first and a second oil field scale inhibitor. (2015). PCT Int. Appl. WO2015075309A1
  44. 44. Kamagurov SD, Kovaleva NE, Oshchepkov MS, Popov KI, Tkachenko SV, Starkova ES. Fluorophor and method for obtaining salt inhibitor containing fluorofor as fluorescent mark. Russ. Patent. RU 2640339 C2 20171227; 2017
  45. 45. Wang H, Zhou Y, Yao Q, Sun W. Calcium sulfate precipitation studies with fluorescent-tagged scale inhibitor for cooling water systems. Polymer Bulletin. 2015;72:2171-2188. DOI: 10.1007/s00289-015-1396-2
  46. 46. Feng J, Gao L, Wen R, Deng Y, Wu X, Deng S. Fluorescent polyaspartic acid with an enhanced inhibition performance against calcium phosphate. Desalination. 2014;345:72-76. DOI: 10.1016/j.desal.2014.04.019
  47. 47. Detering J, Urtel B, Weber H, Ettl R, Gaedt T, Heintz E, Bastigkeit T, Eiting T, Sendor-Mueller D. Copolymers containing carboxylic acid groups, sulphonic acid groups and polyalkylene oxide groups as anti-scaling additive to washing and cleaning agents. Russ. Patent RU2574395; 2016
  48. 48. Detering J, Urtel B, Nied S, Heintz E. Low-Molecular, Phosphorus-containing polyacrylic acids and use thereof as scale inhibitors in water supply systems. Russ. Patent. RU2593591C2; 2016
  49. 49. Hills E, Touzet S, Langlois B. Stimulating Oilfields Using Different Scale-Inhibitors. U.S. Patent. US7703516B2; 2007
  50. 50. Shuzhong H, Weisheng Z,Yu R, Houkai T, Xiangyan M, Longxin Y, Wu X, Wang J. Preparation method of acrylic polymer with fluorescence characteristic. PRC Patent. CN103242476B; 2015
  51. 51. Mayumi K, Norimasa K. Agent for water treatment containing a polymer for water treatment and a process for producing said polymer. U.S. Patent (1997). US5635575A
  52. 52. Liu G, Huang J, Zhou Y, Yao Q, Wang H, Ling L, Zhang P, Ke C, Liu Y, Wendao W, Sun W.Carboxylate-terminated double-hydrophilic block copolymer containing fluorescent groups: An effective and environmentally friendly inhibitor for calcium carbonate scales. International Journal of Polymeric Materials and Polymeric Biomaterials. 2013;62:678-685. DOI: 10.1080/00914037.2013.769226
  53. 53. Kun D, Zhou Y, Dai L, Wang Y. Preparation and properties of polyether scale inhibitor containing fluorescent groups. International Journal of Polymeric Materials and Polymeric Biomaterials. 2008;57:785-796. DOI: 10.1080/00914030801962988
  54. 54. Kun D, Zhou Y, Wang L, Wang Y. Fluorescent-tagged no phosphate and nitrogen free calcium phosphate scale inhibitor for cooling water systems. Journal of Applied Polymer Science. 2009;113:1966-1974. DOI: 10.1002/app.30213
  55. 55. Huang G, Zhou J, Yao Y, Ling Q, Zhang L, Wang P, Cao H, Liu K, Wu Y, Sun W, Hu W, Zhengjun. Fluorescent-tagged double-hydrophilic block copolymer as a green inhibitor for calcium carbonate scales. Tenside Surfactants Detergents. 2012;49:404-412. DOI: 10.3139/113.110210
  56. 56. Wang H, Zhou Y, Yao Q, Ma S, Wendao W, Sun W. Synthesis of fluorescent-tagged scale inhibitor and evaluation of its calcium carbonate precipitation performance. Desalination. 2014;340:1-10. DOI: 10.1016/j.desal.2014.02.015
  57. 57. Moriarty Barbara E, Wei Mingli, Hoots John E, Workman David P, Rasimas Jeffrey P. Fluorescent monomers and polymers containing same for use in industrial water systems. U.S. Patent (2001). US6312644B1
  58. 58. Moore L, Clapp L. Tagged scale inhibitor compositions and methods of inhibiting scale. U.S. Patent. US8980123B2;2015
  59. 59. Ying W, Peng L, Jiajun F, Xiaodong L, Zhuo L, Xuelong L. Fluorescence-trace water processing agent containing coumarins derivative groups and preparation method thereof. PRC Patent. CN103482777B; 2015
  60. 60. Mittapalli RR, Namashivaya SSR, Oshchepkov AS, Kuczyńska E, Kataev EA. Design of anion-selective PET probes based on azacryptands: The effect of pH on binding and fluorescence properties. Chemical Communications. 2017;53:4822-4825. DOI: 10.1039/C7CC01255A
  61. 61. Oshchepkov AS, Mittapalli RR, Fedorova OA, Kataev EA. Naphthalimide-based polyammonium chemosensors for anions: Study of binding properties and sensing mechanisms. Chemistry - A European Journal. 2017;23:9657-9665. DOI: 10.1002/chem.201701515
  62. 62. Oshchepkov AS, Oshchepkov MS, Arkhipova AN, Panchenko PA, Fedorova OA. Synthesis of 4-nitro-N-phenyl-1,8-naphthalimide annulated to thia- and azacrown ether moieties. Synthesis-Stuttgart. 2017;49:2231-2240. DOI: 10.1055/s-0036-1588712
  63. 63. Oshchepkova MV, Oshchepkov MS, Fedorova OA, Fedorov YV, Lozinskii VI. New copolymer gels based on N,N-dimethylacrylamide and crown-containing allyl derivative of 1,8-naphthalimide as optical sensors for metal cations in an organic medium. Doklady Physical Chemistry. 2017;476:181-185. DOI: 10.1134/S0012501617100050
  64. 64. Oshchepkova MV, Oshchepkov AS, Zaborina OE, Fedorova OA, Fedorov YV, Lozinsky VI. Fluorescent cryogels based on copolymers of N,N-dimethylacrylamide and allyl derivatives of 1,8-naphthalimide. Polymer Science Series B. 2015;57:631-637. DOI: 10.1134/S1560090415060159
  65. 65. Atkins JM, Moriarty BE, Zinn PJ. Fluorescent monomers and tagged treatment polymers containing same for use in industrial water systems. U.S. Patent. US2014183140A1; 2014
  66. 66. Zhang Y, Zhang Q, Shi Y, Lei W, Xia M, Wang F. Fluorescence labeling acrylic acid-sodium acrylic sulphonate co-polymer water treatment agent and preparation method thereof. PRC Patent. CN101381168B; 2010
  67. 67. Lei XM. Methoxy group naphthyl fluorescence marked water treating agent and its preparing method. PRC Patent. CN1781857A; 2006
  68. 68. Morris JD, Moriarty BE, Wei Mingli, Murray PG, Reddinger JL. Fluorescent Monomers and Tagged Treatment Polymers Containing Same for Use in Industrial Water Systems. 2001. PCT Int. Appl. WO 2001081654 A1 20011101
  69. 69. Zhang B, Zhou D, Lu X, Xu Y, Ciu Y. Synthesis of polyaspartic acid/3-amino-1H-1,2,4-triazole-5-carboxylic acid graft copolymer and evaluation of its corrosion inhibition and scale inhibition performance. Desalination. 2013;327:32-38. DOI: 10.1016/j.desal.2013.08.005
  70. 70. Xu Y, Zhang B, Zhao L, Ciu Y. Synthesis of polyaspartic acid/3-aminoorotic acid graft copolymer and evaluation of its scale inhibition and corrosion inhibition performance. Desalination. 2013;311:156-161. DOI: 10.1016/j.desal.2012.11.026
  71. 71. Gao L-J, Feng J-Y, Jin B, Zhang Q-N, Liu T-Q, Lun Y-Q, Wu Z-J. Carbazole and hydroxy groups-tagged poly(aspartic acid) scale inhibitor for cooling water system. Chemistry Letters. 2011;40:1392-1394. DOI: 10.1246/cl.2011.1392
  72. 72. Lijun G, Jiuying F. Fluorescent labeling polyaspartic acid scale inhibitor and preparation method thereof. PRC Patent. CN102910746B; 2013
  73. 73. Huixin Z, Zhiyue C, Xiuhong J, Dongxue S, Dongdong W, Tingru Y, Jie Z, Xu H. Preparation of modified oligochitosan and evaluation of its scale inhibition and fluorescence properties. Journal of Applied Polymer Science. 2015;132:42518. DOI: 10.1002/app.42518
  74. 74. Elliott MN. Scale control by threshold treatment. Desalination. 1970;8:221-236. DOI: 10.1016/S0011-9164(00)80231-3
  75. 75. Reddy MM, Nancollas GH. Calcite crystal growth inhibition by phosphonates. Desalination. 1973;12:61-73. DOI: 10.1016/S0011-9164(00)80175-7
  76. 76. Tomson BM, Fu G, Watson MA, Kan AT. Mechanisms of mineral scale inhibition. SPE Production & Facilities. 2003;18:192-199. DOI: 10.2118/84958-PA
  77. 77. GuiCai Z, JiJiang G, MingQin S, BinLin P, Tao M, ZhaoZheng S. Investigation of scale inhibition mechanisms based on the effect of scale inhibitor on calcium carbonate crystal forms. Science in China, Series B Chemistry. 2007;50:114-120. DOI: 10.1007/s11426-007-0010-3
  78. 78. Lixiu L, Aijiang H. Research progress of scale inhibition mechanism. Advanced Materials Research. 2014;955-959:2411-2414. DOI: 10.4028/5].scientific.net/AMR.955-959.2411
  79. 79. Al-Roomi YM, Hussain KF. Potential kinetic model for scaling and scale inhibition mechanism. Desalination. 2016;393:186-195. DOI: 10.1016/j.desal.2015.07.025
  80. 80. Ji-jiang G, Wang Y, Gui-cai Z, Jiang P, Mingqin S. Investigation of scale inhibition mechanis based on the effect of HEDP on surface charge of calcium carbonate. Tenside, Surfactants, Detergents. 2016;53:29-36. DOI: 10.3139/113.110407
  81. 81. Hoang TA. Mechanisms of scale formation and inhibition. In: Amjad Z, Demadis K, editors. Mineral Scales and Deposits, Scientific and Technological Approaches. 1st ed. Elsevier; 2015. pp. 47-83
  82. 82. NACE Standard TM0374-2007 (formerly TM0374-2001) Laboratory Screening Tests to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Calcium Sulfate and Calcium Carbonate from Solution (for Oil and Gas Production Systems). Item No. 21208. 2007
  83. 83. Krihak M, Murtaugh MT, Shahriari MR. Fiber Optic Oxygen Sensors Based on the Sol-Gel Coating Technique. Proc. SPIE-The International Society for Optical Engineering (Chemical, Biochemical and Environmental Fiber Sensors VIII). Vol. 28361996. pp. 105-115. DOI: 10.1117/12.260583
  84. 84. Lei B, Li B, Zhang H, Zhang L, Li W. Synthesis, characterization, and oxygen sensing properties of functionalized Mesoporous SBA-15 and MCM-41 with a covalently linked ruthenium(II) complex. Journal of Physical Chemistry C. 2007;111:11291-11301. DOI: 10.1021/jp070008w
  85. 85. Li S, Song H, Li W, Ren X, Lu S, Pan G, Fan L, Yu H, Zhang H, Qin R, Dai QL, Wang T. Improved photoluminescence properties of ternary terbium complexes in Mesoporous molecule sieves. The Journal of Physical Chemistry. B. 2006;110:23164-23169. DOI: 10.1021/jp064509d
  86. 86. Papkovskij DB, Ponomarev GV, Kurochkin IN, Chernov SF. Metal complexes of porphyrin-ketones, sensitive member for oxygen optical assay in liquid or gaseous medium and a method of oxygen determination. Russ. Patent. RU2064948C1; 1996
  87. 87. Krihak M, Shahriari MR. A highly sensitive, all solid state Fiber optic oxygen sensor based on the sol-gel coating technique. Electronic Letters. 1996;32:240-242. DOI: 10.1049/el:19960104
  88. 88. Shahriari MR, Murtaugh MT, Kwon HC. Ormosil Thin Films for Chemical Sensing Platforms. Proc. SPIE-The International Society for Optical Engineering (Chemical, Biochemical and Environmental Fiber Sensors IX). Vol. 31051997. pp. 40-51. DOI: 10.1117/12.276133
  89. 89. Wang W, Reimers CE, Wainright SC, Shahriari MR, Morris MJ. Applying Fiber-optic sensors for monitoring dissolved oxygen. Sea Technology. 1999;40:69-74
  90. 90. Weiwei F, Na Z, Lingxin C, Bowei L. An optical sensor for monitoring of dissolved oxygen based on phase detection. Journal of Optics. 2013;15:055502/1-005502/7. DOI: 10.1088/2040-8978/15/5/055502
  91. 91. McElroy WD. The energy source for bioluminescence in an isolated system. Proceedings of the National Academy of Sciences of the United States of America. 1947;33:342-345. DOI: 10.1073/pnas.33.11.342
  92. 92. Björkman KM, Karl DM. A novel method for the measurement of dissolved adenosine and guanosine triphosphate in aquatic habitats: Applications to marine microbial ecology. Journal of Microbiological Methods. 2001;47:159-167. DOI: 10.1016/S0167-7012(01)00301-3
  93. 93. Han TN, Hao NH, Taro U, Yew-Hoong GK. A critical review on characterization strategies of organic matter for wastewater and water treatment processes. Bioresource Technology. 2015;193:523-533. DOI: 10.1016/j.biortech.2015.06.091
  94. 94. Carstea EM, Bridgeman J, Baker A, Reynolds DM. Fluorescence spectroscopy for wastewater monitoring: A review. Water Research. 2016;95:205-219. DOI: 10.1016/j.watres.2016.03.021

Notes

  • A full-scale publication is under in preparation

Written By

Maxim Oshchepkov and Konstantin Popov

Submitted: 04 December 2017 Reviewed: 05 March 2018 Published: 19 September 2018