Conservative-Force-Controlled Feed Drive System for Down Milling

TADIC, Branko ;VUKELIC, Djordje ;HODOLIC, Janko ;MITROVIC, Slobodan ;ERIC, Milan .
Conservative-Force-Controlled Feed Drive System for Down Milling. 
Strojniški vestnik - Journal of Mechanical Engineering, [S.l.], v. 57, n.5, p. 425-439, june 2018. 
ISSN 0039-2480.
Available at: <https://www.sv-jme.eu/article/conservative-force-controlled-feed-drive-system-for-down-milling/>. Date accessed: 19 apr. 2024. 
doi:http://dx.doi.org/10.5545/sv-jme.2009.055.

Tadic, B., Vukelic, D., Hodolic, J., Mitrovic, S., & Eric, M.
(2011).
Conservative-Force-Controlled Feed Drive System for Down Milling.
Strojniški vestnik - Journal of Mechanical Engineering, 57(5), 425-439.
doi:http://dx.doi.org/10.5545/sv-jme.2009.055

@article{sv-jmesv-jme.2009.055,
	author = {Branko  Tadic and Djordje  Vukelic and Janko  Hodolic and Slobodan  Mitrovic and Milan  Eric},
	title = {Conservative-Force-Controlled Feed Drive System for Down Milling},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {57},
	number = {5},
	year = {2011},
	keywords = {down milling; special feed drive system; continuous feed speed control; damping},
	abstract = {Reviewed in this paper are the results of theoretical and experimental investigation of a novel down milling method. The method is based on controlling feed speed using conservative forces, where the active force which provides motion is the horizontal component of the cutting force. Feed motion is therefore realized without any active forces (active drive systems), while the feed speed is regulated by precision breaking of the workpiece, which is possible through hydraulic damping. In addition to the basic theoretical model of the feed drive system, the paper also presents the dynamic model of the drive system, taking into consideration fluid compressibility. Based on the model proposed, a physical instance of the feed drive system was designed, built and tested. The results of preliminary experimental investigation speak in favour of the proposed theoretical model, which enables practical application of this type of feed drive systems.},
	issn = {0039-2480},	pages = {425-439},	doi = {10.5545/sv-jme.2009.055},
	url = {https://www.sv-jme.eu/article/conservative-force-controlled-feed-drive-system-for-down-milling/}
}

Tadic, B.,Vukelic, D.,Hodolic, J.,Mitrovic, S.,Eric, M.
2011 June 57. Conservative-Force-Controlled Feed Drive System for Down Milling. Strojniški vestnik - Journal of Mechanical Engineering. [Online] 57:5

%A Tadic, Branko 
%A Vukelic, Djordje 
%A Hodolic, Janko 
%A Mitrovic, Slobodan 
%A Eric, Milan 
%D 2011
%T Conservative-Force-Controlled Feed Drive System for Down Milling
%B 2011
%9 down milling; special feed drive system; continuous feed speed control; damping
%! Conservative-Force-Controlled Feed Drive System for Down Milling
%K down milling; special feed drive system; continuous feed speed control; damping
%X Reviewed in this paper are the results of theoretical and experimental investigation of a novel down milling method. The method is based on controlling feed speed using conservative forces, where the active force which provides motion is the horizontal component of the cutting force. Feed motion is therefore realized without any active forces (active drive systems), while the feed speed is regulated by precision breaking of the workpiece, which is possible through hydraulic damping. In addition to the basic theoretical model of the feed drive system, the paper also presents the dynamic model of the drive system, taking into consideration fluid compressibility. Based on the model proposed, a physical instance of the feed drive system was designed, built and tested. The results of preliminary experimental investigation speak in favour of the proposed theoretical model, which enables practical application of this type of feed drive systems.
%U https://www.sv-jme.eu/article/conservative-force-controlled-feed-drive-system-for-down-milling/
%0 Journal Article
%R 10.5545/sv-jme.2009.055
%& 425
%P 15
%J Strojniški vestnik - Journal of Mechanical Engineering
%V 57
%N 5
%@ 0039-2480
%8 2018-06-28
%7 2018-06-28

Tadic, Branko, Djordje  Vukelic, Janko  Hodolic, Slobodan  Mitrovic, & Milan  Eric.
"Conservative-Force-Controlled Feed Drive System for Down Milling." Strojniški vestnik - Journal of Mechanical Engineering [Online], 57.5 (2011): 425-439. Web.  19 Apr. 2024

TY  - JOUR
AU  - Tadic, Branko 
AU  - Vukelic, Djordje 
AU  - Hodolic, Janko 
AU  - Mitrovic, Slobodan 
AU  - Eric, Milan 
PY  - 2011
TI  - Conservative-Force-Controlled Feed Drive System for Down Milling
JF  - Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2009.055
KW  - down milling; special feed drive system; continuous feed speed control; damping
N2  - Reviewed in this paper are the results of theoretical and experimental investigation of a novel down milling method. The method is based on controlling feed speed using conservative forces, where the active force which provides motion is the horizontal component of the cutting force. Feed motion is therefore realized without any active forces (active drive systems), while the feed speed is regulated by precision breaking of the workpiece, which is possible through hydraulic damping. In addition to the basic theoretical model of the feed drive system, the paper also presents the dynamic model of the drive system, taking into consideration fluid compressibility. Based on the model proposed, a physical instance of the feed drive system was designed, built and tested. The results of preliminary experimental investigation speak in favour of the proposed theoretical model, which enables practical application of this type of feed drive systems.
UR  - https://www.sv-jme.eu/article/conservative-force-controlled-feed-drive-system-for-down-milling/

@article{{sv-jme}{sv-jme.2009.055},
	author = {Tadic, B., Vukelic, D., Hodolic, J., Mitrovic, S., Eric, M.},
	title = {Conservative-Force-Controlled Feed Drive System for Down Milling},
	journal = {Strojniški vestnik - Journal of Mechanical Engineering},
	volume = {57},
	number = {5},
	year = {2011},
	doi = {10.5545/sv-jme.2009.055},
	url = {https://www.sv-jme.eu/article/conservative-force-controlled-feed-drive-system-for-down-milling/}
}

TY  - JOUR
AU  - Tadic, Branko 
AU  - Vukelic, Djordje 
AU  - Hodolic, Janko 
AU  - Mitrovic, Slobodan 
AU  - Eric, Milan 
PY  - 2018/06/28
TI  - Conservative-Force-Controlled Feed Drive System for Down Milling
JF  - Strojniški vestnik - Journal of Mechanical Engineering; Vol 57, No 5 (2011): Strojniški vestnik - Journal of Mechanical Engineering
DO  - 10.5545/sv-jme.2009.055
KW  - down milling, special feed drive system, continuous feed speed control, damping
N2  - Reviewed in this paper are the results of theoretical and experimental investigation of a novel down milling method. The method is based on controlling feed speed using conservative forces, where the active force which provides motion is the horizontal component of the cutting force. Feed motion is therefore realized without any active forces (active drive systems), while the feed speed is regulated by precision breaking of the workpiece, which is possible through hydraulic damping. In addition to the basic theoretical model of the feed drive system, the paper also presents the dynamic model of the drive system, taking into consideration fluid compressibility. Based on the model proposed, a physical instance of the feed drive system was designed, built and tested. The results of preliminary experimental investigation speak in favour of the proposed theoretical model, which enables practical application of this type of feed drive systems.
UR  - https://www.sv-jme.eu/article/conservative-force-controlled-feed-drive-system-for-down-milling/

Tadic, Branko, Vukelic, Djordje, Hodolic, Janko, Mitrovic, Slobodan, AND Eric, Milan.
"Conservative-Force-Controlled Feed Drive System for Down Milling" Strojniški vestnik - Journal of Mechanical Engineering [Online], Volume 57 Number 5 (28 June 2018)