Production and Mechanical Characterization of Ballistic Thermoplastic Composite Materials
Creators
Description
In this study, first thermoplastic composite materials
/plates that have high ballistic impact resistance were produced. For
this purpose, the thermoplastic prepreg and the vacuum bagging
technique were used to produce a composite material. Thermoplastic
prepregs (resin-impregnated fiber) that are supplied ready to be used,
namely high-density polyethylene (HDPE) was chosen as matrix and
unidirectional glass fiber was used as reinforcement. In order to
compare the fiber configuration effect on mechanical properties,
unidirectional and biaxial prepregs were used. Then the
microstructural properties of the composites were investigated with
scanning electron microscopy (SEM) analysis. Impact properties of
the composites were examined by Charpy impact test and tensile
mechanical tests and then the effects of ultraviolet irradiation were
investigated on mechanical performance.
Files
9999587.pdf
Files
(454.8 kB)
| Name | Size | Download all |
|---|---|---|
|
md5:5ca7bf06dd881990e55936e620b7679b
|
454.8 kB | Preview Download |
Additional details
References
- M. Sarikanat, "Experimental characterization and morphology investigation of composites based on high-density and low-density polyethylene reinforced with non-crimp-stitched glass fabrics," Polymer Composites, vol. 28, pp. 938-948, Aug. 2008.
- A. L. Andrady, "Effects of increased solar ultraviolet radiation on materials," Journal of Photochemistry and Photobiology, vol. Biology 46, pp. 96-103, Oct. 1998.
- M. Qiao, "Effect of environmental temperature on ultraviolet irradiated pp and its composite," Journal of Thermoplastic Composite Materials, vol. 23, pp. 137-148, Jan. 2010.
- R. A. Khan, "Mechanical, degradation, and interfacial properties of synthetic degradable fiber reinforced polypropylene composites," Journal of Reinforced Plastic and Composites, vol. 29, pp. 466-476, Mar. 2010.
- S. Pillay, "Effects of moisture and uv exposure on liquid molded carbon fabric reinforced nylon 6 composite laminates," Composite Science and Technology, vol. 69, pp. 839-846, 2009.
- N.K. Cuong, "Analytical methods for prediction of tensile properties of plain knitted fabric reinforced composites," Anvanced Composite Materials, vol. 6, pp. 123-151, 1997.
- J. Karger-Kocsis, "Textile fabric-reinforced thermoplastic polyester composites," in Handbook of Thermoplastic Polymers: Homopolymers, Copolymers, Blends, and Composites, Handbook of Thermoplastic Polymers: Homopolymers, Copolymers, Blends, and Composites, 1st. ed. ch. 24, S. Fakirov, Ed. Verlag GmbH, Weinheim, 2005, pp. 1133- 1171.
- J. Mayer, "Structure and mechanical properties of knitted carbon-fiberreinforced polyamide 12," Journal of Thermoplastic Composite Materials, vol. 12, pp. 317-334, Jul. 1999.
- M. G. Bader and R. M. Ellis, "The effect of notches and specimen geometry on the pendulum impact strength of uni-axial CFRP," Composites, vol. 6, pp. 253-258, 1974. [10] O. I. Okoli, "The effects of strain rate and failure modes on the failure energy of fiber reinforced composites," Journal of Composite Structure, vol. 54, pp. 299-303, Dec. 2001.