This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Rapid Prototyping Applied to Parts Used in Static Tests of Racks for Packing and Transporting Automobile Parts
Technical Paper
2007-01-2690
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This work was motivated by the specific needs of a materials flow and packing planning sector (PFME), within a manufacturing engineering department of a vehicle assembly company in Brazil. In this sector, there is a growing need to obtain prototype parts in the shortest time and at the lowest cost possible in order to carry out static prototype tests of the special packing and transportation racks used in this company, since these racks need to be ready to assist the preparation phase of the series production of the vehicle. The objective of this work is to survey the academic theory and the existing literature in order to find an application proposal of rapid prototyping (RP) techniques to make the parts used in the rack tests, thus reducing time and acquisition costs. For that purpose, some limiting conditions were considered: first, the application of the RP technique is limited to the external parts of the vehicle, such as doors, front and back hoods, and fenders; second, the consulted suppliers should be available in the domestic market. Finally, a proposal of work systematics for the assembly company is presented.
Authors
Topic
Citation
da Silva, G. and Kaminski, P., "Rapid Prototyping Applied to Parts Used in Static Tests of Racks for Packing and Transporting Automobile Parts," SAE Technical Paper 2007-01-2690, 2007, https://doi.org/10.4271/2007-01-2690.Also In
References
- Moura, R. A. Embalagem unitização e conteinerização São Paulo IMAM 1997
- Kruschwitz, R. Duske, J. Manual do Processo de Desenvolvimento do Produto Internal used document of the assembly company 2004
- Bowersox, J. D. David, J. C. Logistical management: the integrated supply chain process The McGraw-Hill Companies 1996
- Przysiezny, W. L. Distúrbios osteomusculares relacionados ao trabalho: um enfoque ergonômico Dynamis 8 31 19 34 abr. jun. 2000
- Volpato, N. et al. Prototipagem rápida: tecnologias e aplicações São Paulo Edgard Blücher 2007
- Pham, D. T. Gault, R. S. A Comparison of rapid prototyping technologies International Journal of Machine Tools & Manufacture 38 1257 1287 1998
- Chua, C. K. Chou, S. M. Wong, T. S. A study of the state-of-the-art rapid prototyping technologies Advanced Manufacturing Technology 14 146 152 1998
- Upcraft, S. Fletcher, R. The rapid prototyping technologies Rapid Prototyping Journal 23 4 318 330 2003
- GUITIÁN, R. Evolução dos conceitos de polímero e de polimerização São Paulo o 247 setembro 28 32 1994
- Kaminski, P. C. Desenvolvendo produtos com planejamento, criatividade e qualidade Rio de Janeiro LTC Editora 2000
- Wisner, A. A inteligência no trabalho: textos selecionados de ergonomia 1 São Paulo Fundacentro 1997
- Maeno, M. Lesões por esforços repetitivos - LER. Caderno de saúde do trabalhador São Paulo Kingraf - gráfica e editora 2001
- OBJET Tecnologia do processo de impressão a jato de tinta PolyJet http://www.2objet.com. 11 mai. 2007
- ROBTEC Processos de prototipagem rápida - representante da 3D Systems no Brasil 13 jun. 2007
- SISGRAPH Processos de prototipagem rápida - representante da empresa Stratasys no Brasil 13 jun. 2007
- Silva, G. C. Prototipagem rápida aplicada às peças utilizadas em ensaios estáticos de embalagens para acondicionamento e transporte de peças automotivas 2007