[1]
|
A. S. Edelstein and R. C. Cammarata, “Nanomaterials: Synthesis, Properties and Applications,” Institute of Physics Publication, Bristol, 1996.
|
[2]
|
K. C. Patil, S. T. Aruna and T. Mimani, “Combustion Synthesis: An Update,” Current Opinion in Solid State & Materials Science, Vol. 6, No. 6, 2002, pp. 507-512.
doi:10.1016/S1359-0286(02)00123-7
|
[3]
|
S. R. Jain, K. C. Adiga and V. R. Pai Verneker, “A New Approach to Thermochemical Calculations of Condensed Fuel-Oxidizer Mixtures,” Combustion and Flame, Vol. 40, No. 6, 1981, pp. 71-79.
doi:10.1016/0010-2180(81)90111-5
|
[4]
|
K. C. Patil, “Advanced Ceramics: Combustion Synthesis and Properties,” Bulletin of Material Science, Vol. 16, No. 6, 1993, pp. 533-541. doi:10.1007/BF02757654
|
[5]
|
M. Marinsek, K. Zupan and J. Maèek, “Ni-YSZ Cermet Anodes Prepared by Citrate/Nitrate Combustion Synthesis” Journal of Power Sources, Vol. 106, No. 1-2, 2002, pp. 178-188. doi:10.1016/S0378-7753(01)01056-4
|
[6]
|
A. Chakroborty, A. Das Sharma, B. Maiti and H. S. Maiti, “Preparation of Low-Temperature Sinterable BaCe0.8-Sm0.2O3 Powder by Autoignition Technique,” Materials Letters, Vol. 57, No. 4, 2002, pp. 862-867.
doi:10.1016/S0167-577X(02)00886-8
|
[7]
|
A. Mali and A. Ataie, “Influence of the Metal Nitrates to Citric Acid Molar Ratio on the Combustion Process and Phase Constitution of Barium Hexaferrite Particles PrepaRed by So-Gel Combustion Method,” Ceramics International, Vol. 30, No. 7, 2004, pp. 1979-1983.
doi:10.1016/j.ceramint.2003.12.178
|
[8]
|
B. J. Hwang, R. Santhanam and D. G. Liu, “Effect of Various Synthetic Parameters on Purity of LiMn2O4 Spinel Synthesized by a Sol-Gel Method at Low Temperature,” Journal of Power Sources, Vol. 101, No. 1, 2001, pp. 86-89. doi:10.1016/S0378-7753(01)00657-7
|
[9]
|
T. Peng, X. Liu, K. Dai, J. Xiao and H. Song, “Effect of Acidity on the Glycine-Nitrate Combustion Synthesis of Nanocrystalline Alumina Powder,” Materials Research Bulletin, Vol. 41, No. 9, 2006, pp. 1638-1645.
doi:10.1016/j.materresbull.2006.02.026
|
[10]
|
O. Burgos-Montes, R. Moreno, M. T. Colomer and J. C. Fari?nas, “Influence of Combustion Aids on Suspension Combustion Synthesis of Mullite Powders,” Journal of the European Ceramic Society, Vol. 26, No. 15, 2006, pp. 3365-3372. doi:10.1016/j.jeurceramsoc.2005.08.006
|
[11]
|
S. Biamino and C. Badini, “Combustion Synthesis of Lanthanum Chromite Starting from Water Solutions: Investigation of Process Mechanism By DTATGA-MS,” Journal of the European Ceramic Society, Vol. 24, No. 10-11, 2004, pp. 3021-3024.
doi:10.1016/j.jeurceramsoc.2003.10.005
|
[12]
|
C.-C. Hwang, T.-H. Huang, J.-S. Tsai, C.-S. Lin and C.-H. Peng, “Combustion Synthesis of Nanocrystalline Ceria (CeO2) Powders by a Dry Route,” Materials Science and Engineering: B, Vol. 132, No. 3, 2006, pp. 229-238.
doi:10.1016/j.mseb.2006.01.021
|
[13]
|
A. S. Mukasyan, P. Epstein and P. Dinka, “Solution Combustion Synthesis of Nanomaterials,” Proceedings of the Combustion Institute, Vol. 31, No. 2, 2007, pp. 1789-1795. doi:10.1016/j.proci.2006.07.052
|
[14]
|
V. Chandramouli, S. Anthonysamy and P. R. Vasudeva Rao, “Combustion Synthesis of Thoria a Feasibility Study,” Journal of Nuclear Materials, Vol. 265, No. 3, 1999, pp. 255-261. doi:10.1016/S0022-3115(98)00688-6
|
[15]
|
J. Poth, R. Haberkorn and H. P. Beck, “Combustion-Synthesis of SrTiO3. Part I. Synthesis and Properties of the Ignition Products,” Journal of the European Ceramic Society, Vol. 20, 2000, pp. 707-713.
|
[16]
|
M. Biswas, K. Shashidhara, P. K. Ojha and T. K. Chongdar, “Linear Combination of Atomic Orbitals Approximation in Nanocrystalline Yittria-Stabilized Zirconia Synthesized by Citrate-Nitrate Gel Combustion Process,” Journal of the American Ceramic Society, Vol. 91, No. 3, 2008, pp. 934-937.
doi:10.1111/j.1551-2916.2007.02218.x
|
[17]
|
B. D. Culity, “Elements of X-Ray Diffraction,” AddisonWesley, Reading, 1978.
|
[18]
|
R. E. Juarez, D. G. Lamas, G. E. Lascalea and N. E. Walsoe de Reca, “Synthesis of Nanocrystalline Zirconia Powders for TZP Ceramics by a Nitrate-Citrate Combustion Route,” Journal of the European Ceramic Society, Vol. 20, No. 2, 2000, pp. 133-138.
doi:10.1016/S0955-2219(99)00146-6
|
[19]
|
K. A. Singh, L. C. Pathak and S. K. Roy, “Effect of Citric Acid on the Synthesis of Nano-Crystalline Yttria Stabilized Zirconia Powders by Nitrate-Citrate,” Ceramics International, Vol. 33, No. 8, 2007, pp. 1463-1468.
doi:10.1016/j.ceramint.2006.05.021
|
[20]
|
L. C. Pathak, T. B. Singh, S. Das, A. K. Verma and P. Ramachandrarao, “Effect of pH on the Combustion Synthesis of Nano-Crystalline Alumina Powder,” Materials Letters, Vol. 57, No. 2, 2002, pp. 380-385.
doi:10.1016/S0167-577X(02)00796-6
|
[21]
|
M. Bhagwat, P. Shah and V. Ramaswamy, “Synthesis of Nanocrystalline SnO2 Powder by Amorphous Citrate Route,” Materials Letters, Vol. 57, No. 9-10, 2003, pp. 1604-1611. doi:10.1016/S0167-577X(02)01040-6
|
[22]
|
R. D. Purohit, S. Saha and A. K. Tyagi, “Combustion Synthesis of Nanocrystalline ZrO2 Powder: XRD, Raman Spectroscopy and TEM Studies,” Materials Science and Engineering: B, Vol. 130, No. 1-3, 2006, pp. 57-60.
doi:10.1016/j.mseb.2006.02.041
|