[1]
|
T. Von Karman, “On the Theory of Rolling,” Zeitschrift für Angewandte Mathematik und Mechanik, Vol. 5, 1925, pp. 130-141.
|
[2]
|
E. Orowan, “The Calculation of Roll Pressure in Hot and Cold Flat Rolling,” Proceedings of the Institue of Me- chanical Engineering, Vol. 150, 1943, pp. 140-167.
|
[3]
|
A. Nadal, “The Force Required for Rolling Steel Strip under Tension,” Journal of Applied Mechanics ASME, Vol. 61, 1939, A54-A62.
|
[4]
|
D. R. Bland and H. Ford, “The Calculation of Roll Force and Torque in Cold Strip Rolling with Tensions,” Proceedings of the Institute of Mechanical Enigineering, Vol. 159, No. 1, 1948, pp. 144-163.
doi:10.1243/PIME_PROC_1948_159_015_02
|
[5]
|
R. B. Sims, “The Calculation of Roll Force and Torque in Hot Rolling Process,” Proceedings of the Institue of Mechanical Engineering, Vol. 168, No. 1, 1954, pp. 191-200.
doi:10.1243/PIME_PROC_1954_168_023_02
|
[6]
|
J. M. Alexander, “A Slip Line Field for Hot Rolling Process,” Proceedings of the Institute of Mechanical Engineering, Vol. 169, No. 1, 1955, pp. 1021-1030.
doi:10.1243/PIME_PROC_1955_169_103_02
|
[7]
|
T. C. Firbank and P. R. Lancaster, “A suggested slip- line field for cold rolling with slipping friction,” Interna- tional Journal of Mechanics of Science, Vol. 7, No. 12, 1965, pp. 847-852.
|
[8]
|
T. C. Firbank and P. R. Lancaster, “A Suggested Slip-Line Field for Lubricated Cold Rolling,” International Journal of Mechanics of Science, Vol. 9, No. 2, 1967, pp. 65-67.
doi:10.1016/0020-7403(67)90044-6
|
[9]
|
I. F. Collins, “Slip Line Field Solutions for Compression and Rolling with Slipping Friction,” International Journal of Mechanics of Science, Vol. 11, No. 12, 1969, pp. 971-978. doi:10.1016/0020-7403(69)90009-5
|
[10]
|
P. Dewhurst and I. F. Collins, “A Matrix Technique for Constructing Slip-Line Field Solutions to a Class of Plane Strain Plasticity Problems,” International Journal for Nu- merical Methods in Engineering, Vol. 7, No. 3, 1973, pp. 357-378. doi:10.1002/nme.1620070312
|
[11]
|
M. Salimi and M. Kadkhodaei, “Slab Analysis of Asymmetrical Sheet Rolling,” Journal of Materials Processing Technology, Vol. 150, No. 3, 2004, pp. 215-222.
doi:10.1016/j.jmatprotec.2004.01.011
|
[12]
|
R. Hill, “The Mathematical Theory of Plasticity,” 1st Edition, Oxford University press, Oxford, 1950.
|
[13]
|
B. Avitzur, “Metal Forming: The Application of Limit Analysis,” Marcel Dekker, Inc. New York, 1980.
|
[14]
|
N. R. Chitkara and M. A. Butt, “Combined Rod and Tube Extrusion: Numerical Solution of Axi-Symmetric Slip- Line Fields and Associated Velocity Fields,” International Journal of Mechanical Sciences, Vol. 39, No. 4, 1997, pp. 435-454. doi:10.1016/S0020-7403(96)00038-0
|
[15]
|
N. Fang and P. Dewhurst, “Slip-Line Modeling of Built-Up Edge Formation in Machining,” International Jour- nal of Mechanical Sciences, Vol. 47, No. 7, 2005, pp. 1079-1098. doi:10.1016/j.ijmecsci.2005.02.008
|
[16]
|
W. S. Weroński, A. Gontarz and Z. B. Pater, “Analysis of the Drop Forging of a Piston Using Slip-Line Fields and FEM,” International Journal of Mechanical Sciences, Vol. 39, No. 2, 1997, pp. 211-213, 215-220.
doi:10.1016/0020-7403(96)00055-0
|
[17]
|
K. Mori, K. Osakada and T. Oda, “Simulation of Plane-Strain Rolling by the Rigid-Plastic Finite Element Method,” International Journal of Mechanical Sciences, Vol. 24, No. 9, 1982, pp. 519-527.
doi:10.1016/0020-7403(82)90044-3
|
[18]
|
J. Synka and A. Kainz, “A Novel Mixed Eulerian-La- grangian Finite-Element Method for Steady-State Hot Rolling Processes,” International Journal of Mechanical Sciences, Vol. 45, No. 12, 2003, pp. 2043-2060.
doi:10.1016/j.ijmecsci.2003.12.008
|
[19]
|
J. Chakrabaty, “Theory of Plasticity,” 3rd Edition, Elsevier, Butterworth-Heinemann, Oxford, 2006.
|
[20]
|
M. Konyaeva, “Fundamentals of the Theory of Plasticity,” 1st Edition, Mir Publishers Moscow, Moscow, 1974.
|