Development of Superplastic Dieless Drawing Apparatus for 3Y-TZP Zirconia Ceramic Tube

Tsuyoshi Furushima; Yutaro Hirose; Kazuo Tada; Ken-Ichi Manabe

doi:10.4028/www.scientific.net/MSF.838-839.597

Paper Titles

Production of a Superplastic Vibration-Damping Steel Sheet Composite Using Friction Stir Forming
p.574

Topology Optimization and Process Validation of a SPF/DB Cylinder Structure
p.581

The Influence of Ti-6-4 Alloy Interlayer on Ti3Al Alloy DB Quality and Interface Mechanical Properties
p.586

Superplasticity Effect Demonstrated by Gas Forming Hot Bent AA5XXX Sheets into V-Shaped Trough Containing Uneven Concavities
p.592

Development of Superplastic Dieless Drawing Apparatus for 3Y-TZP Zirconia Ceramic Tube
p.597

Innovative Methods for Investigating Key Process Variables in the Manufacture of Superplastically Formed Aero-Engine Components
p.603

Promises of Low-Temperature Superplasticity for the Enhanced Production of Hollow Titanium Components
p.610

New Technologies Development and Equipment for Local Shape-Forming of the Complicated Parts Made of Heat-Resistant Alloys under Superplastic Deformation Conditions
p.615

Finite Element Analysis and Validation of the Superplastic Forming of Multi-Sheet Structures
p.621

HomeMaterials Science ForumMaterials Science Forum Vols. 838-839Development of Superplastic Dieless Drawing...

Development of Superplastic Dieless Drawing Apparatus for 3Y-TZP Zirconia Ceramic Tube

Abstract:

A novel superplastic dieless drawing technique with local heating and tensile deformation has been focused on for fabrication of zirconia ceramic tube. In this study, 3Y-TZP zirconia ceramic tube with outer diameter of 6mm and inner diameter of 4mm as a superplastic material is used experimentally. An apparatus of superplastic dieless drawing with rotary stage for circumferential uniform heating and acetylene burner for high temperature of 1700°C is developed. The superplastiac dieless drawing experiment is carried out to investigate the effect of the ratio of drawing speed to feeding speed on the flexible controllability of diameter after drawing process. As a result, the reduction in area after drawing process can be controlled by the ratio of drawing speed to feeding speed. In addition, a maximum reduction in area of 79.2% can be realized in this process. Consequently, the validity of developed apparatus of superplastic dieless drawing for Zirconia ceramic tube can be demonstrated.

You might also be interested in these eBooks

Superplasticity in Advanced Materials - ICSAM 2015

View Preview

Info:

Periodical:

Materials Science Forum (Volumes 838-839)

Pages:

597-602

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.838-839.597

Citation:

Cite this paper

Online since:

January 2016

Authors:

Tsuyoshi Furushima*, Yutaro Hirose, Kazuo Tada, Ken-Ichi Manabe

Keywords:

Ceramic Tube, Dieless Drawing, Superplasticity

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] S. Hashimoto, Y. Liu, M. Mori, Y. Funahashi, Y. Fujishiro, Study of steam electrolysis using a microtubular ceramic reactor, Int. J. Hydrogen Energy. 34 (2009) 1159–1165.

DOI: 10.1016/j.ijhydene.2008.11.037

Google Scholar

[2] F. Wakai, S. Sakaguchi, Y. Matsuno, Superplasticity of yttria-stabilized tetragonal ZrO2 polycrystals, Adv. Ceram. Mater. 1 (1986) 259-263.

DOI: 10.1111/j.1551-2916.1986.tb00026.x

Google Scholar

[3] V. Weiss, R.A. Kot, Dieless Wire Drawing with Transformation Plasticity, Wire Journal,. 9 (1969) 182–189.

Google Scholar

[4] T. Furushima, K. Manabe, Experimental study on multi-pass dieless drawing process of superplastic Zn–22%Al alloy microtubes, J. Mater. Process. Technol. 187-188 (2007) 236–240.

DOI: 10.1016/j.jmatprotec.2006.11.204

Google Scholar

[5] T. Furushima, K. Manabe, Experimental and numerical study on deformation behavior in dieless drawing process of superplastic microtubes, J. Mater. Process. Technol. 191 (2007) 59–63.

DOI: 10.1016/j.jmatprotec.2007.03.084

Google Scholar

[6] T. Furushima, K. Manabe, FE analysis of size effect on deformation and heat transfer behavior in microtube dieless drawing, J. Mater. Process. Technol. 201 (2008) 123–127.

DOI: 10.1016/j.jmatprotec.2007.11.229

Google Scholar

[7] T. Furushima, T. Shimizu, K. Manabe, Grain Refinement by Combined ECAE/Extrusion and Dieless Drawing Processes for AZ31 Magnesium Alloy Tubes, Mater. Sci. Forum. 654-656 (2010) 735–738.

DOI: 10.4028/www.scientific.net/msf.654-656.735

Google Scholar

[8] T. Furushima, A. Shirasaki, K. Manabe, Fabrication of noncircular multicore microtubes by superplastic dieless drawing process, J. Mater. Process. Technol. 214 (2014) 29–35.

DOI: 10.1016/j.jmatprotec.2013.07.005

Google Scholar