Aluminothermic Reduction of Niobium Pentoxide in a Hydrogen Plasma Furnace

Marcio W.D. Mendes; António Carlos P. Santos; Francisca de Fatima P. Medeiros; Clodomiro Alves Jr.; A.G.P. Silva; Uilame Umbelino Gomes

doi:10.4028/www.scientific.net/MSF.514-516.599

Paper Titles

Application of Advanced Multiphase Steels in Crashworthiness Structures: Experimental Study and Constitutive Equations
p.579

Transverse Rupture Strength of M3:2 High Speed Steel Produced through Conventional Casting and Powder Metallurgy Techniques
p.584

Dislocation Microstructure in Copper Multicrystals Deformed under the Sequences: Rolling - Tension and Tension - Rolling
p.589

Magnesium Removal from TiC-TiB₂ SHS-Powders by Controlled Hot Acid Leaching
p.594

Aluminothermic Reduction of Niobium Pentoxide in a Hydrogen Plasma Furnace
p.599

Statistical Modelling of the Particle Size Composition of an Alumina Matrix for No-Cement Self-Flowing Refractory Castables
p.604

Formation of Ti-Matrix Composites for Lightweight Structural Components by Mechanical Alloying and Subsequent Annealing
p.609

Analyses of Composite Structures Behaviour with Embedded Bragg Grating Sensors
p.614

Mechanical Properties of Particle Reinforced Resin Composites
p.619

HomeMaterials Science ForumMaterials Science Forum Vols. 514-516Aluminothermic Reduction of Niobium Pentoxide in a...

Aluminothermic Reduction of Niobium Pentoxide in a Hydrogen Plasma Furnace

Abstract:

The aluminothermic reduction is a highly exothermal reaction between a metal oxide and aluminium. Conventionally this reaction is ignited by an electric resistance and the reaction products after cooling are in the form of a rigid block of mixed metal and aluminium oxide. In this work a new process of aluminothermic reduction is presented, in which the reaction is ignited by a hydrogen plasma. The niobium oxide and aluminium powders are high energy milled for six hours to form particles constituted of oxide and aluminum. Stoichiometric, substoichiometric and superstoichiometric mixtures were prepared. The mixture was placed in a stainless steel tube (the hollow cathode) inside the reactor chamber. The chamber was firstly evacuated. Then hydrogen at low pressure was introduced. In the following an electric discharge between the cathode and the anode localized just above the cathode ignites the plasma. The plasma heats the particles on the surface of the powder layer and starts the reaction that proceeds in each particle since the reactants are intimately mixed. The heat generated by the reaction propagates deeper in the layer until the whole mixture reacts. Substoichiometric mixtures can be used because hydrogen takes part of the reduction. The Nb2O5 – Al starting powder mixture and the products of the reaction are characterized by laser grain size measurement and X-Ray diffraction (XRD). The products are in form of powder or agglomerates of particles. Phases of reaction products was determined by XRD analysis and the particle size trough SEM.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Materials Science Forum (Volumes 514-516)

Pages:

599-603

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.514-516.599

Citation:

Cite this paper

Online since:

May 2006

Authors:

Marcio W.D. Mendes, António Carlos P. Santos, Francisca de Fatima P. Medeiros, Clodomiro Alves Jr., A.G.P. Silva, Uilame Umbelino Gomes

Keywords:

Aluminothermic Reduction, Niobium, Plasma

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] D. Lupton, F. Aldinger: Possible substitutes for tantalum in chemical plant handling mineral acids. In: Proceedings of the 10th Plansee Seminar, Reutte, Austria 1981; 1: 101-30.

Google Scholar

[2] I.G. Sharma, S.P. Chakraborty, D.K. Bose: Preparation of carbon incorporated Nb-A1 alloy and its subsequent conversion to pure niobium by electron beam melting. Journal of Alloys and Compounds 236 (1996) 216-223.

DOI: 10.1016/0925-8388(95)02088-8

Google Scholar

[3] J.R. Darnell, L.F. Yntema: The Element Columbium and Its Coumpounds. In: Technology of Columbium (Niobium) - Symposium on Columbium (Niobium) of the Electrothermics and Metallurgy Division of the Eletrochemical Socirety. Washington D. C., May 15 - 16, 1958, pp.1-9.

DOI: 10.4095/102452

Google Scholar

[4] H.R.Z. Sandim; D.G. Pinatti; C.A. Baldan; R.A. Conte; C.R. Dainesi; C.A. Nunes: Processamento do Nióbio e Suas Ligas Via Redução Aluminotérmica e Posterior Fusão e Refino por Feixe Eletrônico. In: Simpósio Anual da ACIESP Sobre Ciência e Tecnologia do Nióbio. São Paulo, 1995. Anais. São Paulo, FINEP / AIESP, 1995. pag. 1 - 9.

Google Scholar

[5] F. Habashi: Principles of Extractive Metallurgy. New York, Gordon and Breach, v. 3, 1986, p.19.

Google Scholar

[6] S. Gennari, F. Maglia, U. A. Tamburini, G. Spinolo: SHS (Self-sustained high-temperature synthesis) of intermetallic compounds: effect of process parameters by computer simulation. Intermetallics 11 (2003) 1355-1359, (2003).

DOI: 10.1016/s0966-9795(03)00179-1

Google Scholar

[7] S. M. Rossnagel, J. J. Cuomo, W. D. Westwood: Handbook of plasma processing technology - Fundamentals, etching, deposition and surface interaction. New Jersey, Noyes, 1989. 523 p. C. W. Balke, Trans. Electrochem. Soc., 85 (1944) 89.

Google Scholar