Paper Titles

Scaling of Minor Hysteresis Loops in Soft Magnetic Amorphous Alloy
p.3

Effect of Base Strip Temperature on Bonding of Three-Layer Clad Strip Cast by a Vertical-Type Tandem Twin Roll Caster
p.8

Numerical and Experimental Study of Quenching and Tempering Process of AISI 4130 Steel for Rocket Components
p.16

The Effect of Shaft Diameter on Hardness Distribution and Case Harden Depth of AISI4130 Alloy Steel after Quenching
p.23

Influence of Furnace-Induction Heating on Hardness Distribution and Retained Austenite in JIS SUJ2 Bearing Steel
p.30

Fabrication of Aluminum Alloy Rods Using a Single Wheel Caster with Rotating Side Dam Plates and Pool-Less Pouring
p.35

Effects of Process Parameters on the Shape Changes of a Micro Cementite Band during Macro Drawing of a Pearlitic Steel Wire
p.41

Variable Thickness Rolling - A New Process for Rolled Profile Strips
p.47

HomeKey Engineering MaterialsKey Engineering Materials Vol. 792Scaling of Minor Hysteresis Loops in Soft Magnetic...

Scaling of Minor Hysteresis Loops in Soft Magnetic Amorphous Alloy

Article Preview

Abstract:

Scaling of minor hysteresis loops in the amorphous alloy Co₆₆Fe₃Cr₃Si₁₅B₁₃ with a very high initial permeability (more than 150000) and low coercivity (about 0.1 А/m) has been studied. In weak magnetic fields and in the region of maximal growth of permeability a similarity of minor loops was detected. Analytical expressions for hysteresis losses are derived which provide a good accordance of calculations with the results of measurements.

You might also be interested in these eBooks

Engineering and Innovative Materials VII

Info:

Periodical:

Key Engineering Materials (Volume 792)

Pages:

3-7

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.792.3

Citation:

Cite this paper

Online since:

December 2018

Authors:

Vladimir S. Tsepelev*, Yuri N. Starodubtsev, Nadezhda P. Tsepeleva, Kai Ming Wu, Ke Lin Zhang, Meng Qi Huang

Keywords:

Amorphous Alloy, Coercive Force, Hysteresis Loop, Hysteresis Losses, Scaling

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

[1] Y. Sakaki, and T. Matsuoka, IEEE Trans. Magn. Vol. 22 (1986), p.623.

[2] Y.-L. He, and G. C. Wang, Phys. Rev. Lett. Vol. 70 (1993) p.2336.

[3] S. Takahashi, S. Kobayashi, Y. Kamada, H. Kikuchi, L. Zhang, and K. Ara, Phys. B Vol. 372 (2006) p.190.

[4] S. Kobayashi, T. Fujiwara, S. Takahashi, H. Kikuchi, Y. Kamada, K. Ara, and T. Shishido, Phil. Mag. Vol. 89 (2009) p.651.

[5] S. Kobayashi, S. Takahashi, T. Shishido, Y. Kamada, and H. Kikuchi, J. Appl. Phys. Vol. 107 (2009) 023908.

[6] S. Kobayashi, S. Takahashi, H. Kikuchi, and Y. Kamada, J. Phys.: Conf. Ser. Vol. 266 (2011) 012015.

[7] V. S. Tsepelev, Yu. N. Starodubtsev, and N. P. Tsepeleva, AIP Advances Vol. 8 (2018) 047707.

[8] Rayleigh Lord, Phil. Mag. Vol. 23 (1887) p.225.

[9] C. Borderon, R. Renoud, M. Ragheb, and H. W. Gundel, Appl. Phys. Lett. Vol. 98 (2011) 112903.

DOI: 10.1063/1.3567777

[10] Z. Luo, X. Lou, F. Zhang, Y. Liu, D. Chang, C. Liu, Q. Liu, B. Dkhil, M. Zhang, X. Ren, and H. He, Appl. Phys. Lett. Vol. 104 (2014) 142904.

DOI: 10.1063/1.4870992

[11] R. E. Eitel, T. R. Shrout, and C. A. Randall, J. Appl. Phys. Vol. 99 (2006) 124110.

[12] O. Boser J. Appl. Phys. Vol. 54 (1983) p.2338.

[13] C.P. Steinmetz, Proc. IEEE Vol. 72 (1989) p.197, preprinted from the Amer. Inst. Electr. Eng. Trans. Vol. 9 (1892) p.3.

[14] Yu.N. Starodubtsev, and V.A. Kataev, Phys. Met. Metallogr. Vol. 64 (1987) p.1076.

[15] V. Tsepelev, Yu. Starodubtsev, V. Zelenin, V. Belozerov, and V. Konashkov, J. Alloys Comp. Vol. 643 (2015) p. S280.

DOI: 10.1016/j.jallcom.2014.12.236

[16] S. Tumanski, Handbook of magnetic measurements, CRC Press, Taylor&Francis Group (2011).

[17] S. Chikazumi, Physics of ferromagnetism, Oxford University Press, New York (1997).

[18] C. Heck, Magnetic materials and their applications, Batterworths, London (1974).

[19] M. Kersten, Z. angew. Phys. Vol. 8 (1956) p.313.

[20] Yu. N. Starodubtsev, V. A. Kataev, and V. S. Tsepelev: J. Magn. Magn. Mater Vol. 460 (2018) p.146.