Calcium Behaviors in MnZn Ferrite at Different Temperatures

Ya Qiu Cai; Yang Yi Lin; X. Li; Jin Tao Huang; Takuya Aoki

doi:10.4028/www.scientific.net/KEM.512-515.1412

Paper Titles

Synthesis of Single-Crystalline Plate-Shaped K_0.5Na_0.5NbO₃ Particles by Multi-Step Molten Salt Method
p.1395

Influence of Ta⁵⁺ Doping on the Piezoelectric Properties of KNN Ceramics
p.1399

Study on the Pressureless Sintering and Properties of (K_0.5Na_0.5)_1-xLi_xNb_1-yTa_yO₃ Lead-Free Piezoelectric Ceramics
p.1403

Doping Effect of W⁶⁺ Ions on Microstructural and Magnetic Properties of Mn-Zn Ferrites
p.1408

Calcium Behaviors in MnZn Ferrite at Different Temperatures
p.1412

Effects of Eu³⁺ Substitution on Nanosized Mn-Zn Ferrite Powders Synthesized by Combustion Processing
p.1416

Molten Salt Synthesis of Ni_0.5Zn_0.5Fe₂O₄ Ferrites
p.1420

Effect of SiO₂ Content on the Electromagnetic Properties of CoZn-Z Type Barium Ferrite Prepared with Ferrous Micro-Beads
p.1424

Fabrication of Iron Carbide and Nitride Ceramics with Controlled Magnetic Properties by the Non-Oxide Sol-Gel Process
p.1429

HomeKey Engineering MaterialsKey Engineering Materials Vols. 512-515Calcium Behaviors in MnZn Ferrite at Different...

Calcium Behaviors in MnZn Ferrite at Different Temperatures

Abstract:

MnZn ferrites have been widely used as magnetic core materials. It is well known that Ca addition is effective to obtain homogeneous microstructure of fine grains and highly resistive grain boundaries. However, the behaviors of calcium as one of the main additives at different temperature ranges during sintering process are not completely understood yet. In this study, the influence of CaCO3 content and sintering temperature on the microstructure was investigated in 1473-1623 K. It was found that there existed a critical temperature around 1550 K. The grain size decreased with the increase of Ca content when the sintering temperature was lower than the critical temperature, but completely opposite result was observed at higher temperatures range. Possible mechanisms were discussed. When the sintering temperature was lower than the critical temperature, Ca content greatly affected the grain boundary mobility and dominated the grain growth. At higher temperatures, however, formation of liquid phases might be the main cause for the grain growth.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Key Engineering Materials (Volumes 512-515)

Pages:

1412-1415

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.512-515.1412

Citation:

Cite this paper

Online since:

June 2012

Authors:

Ya Qiu Cai, Yang Yi Lin, X. Li, Jin Tao Huang, Takuya Aoki

Keywords:

Calcium, Grain Boundary, Liquid Phase, MnZn Ferrite

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] I. Barin, Thermochemical Data of Pure Substances, 2nd ed., VCH Verlags, Gesellschaft, Weinheim, 1993.

Google Scholar

[2] H. Shokrollahi, Magnetic properties and densification of Manganese-Zinc soft ferrites (Mn1-xZnxFe2O4) doped with low melting point oxides, J. Magn. Magn. Mater. 320(2008) 463-474.

DOI: 10.1016/j.jmmm.2007.07.003

Google Scholar

[3] T. Akashi, Effect of the addition of CaO and SiO2 on the magnetic characteristics and microstructures of Manganese-Zinc Ferrites (Mn0.68Zn0.21Fe2.11O4+d), Trans. Jpn. Inst. Metals. 2(1961) 171-176.

Google Scholar

[4] G.Jeong, J.Choi,S.Kim,Abnormal grain growth and magnetic loss in Mn-Zn Ferrites containing CaO and SiO2, J. IEEE Transaction on Magnetics. 36(2000) 3405-3407.

DOI: 10.1109/20.908841

Google Scholar

[5] ASTM international, E112-96 (Reapproved 2004)

Google Scholar

[6] Information on http://www.crct.polymtl.ca/FACT/documentation/TDNucl/

Google Scholar

[7] T. Chiba, E. Otsuki, T. Otsuka, et al., Effect of sintering process on nanostructure and magnetic properties of Mn-Zn Ferrites, J. Tokin Technical Review. 21 (1994) 12-16.

Google Scholar

[8] S. Che, M. Watanabe, K. Mori, et al., Dissolution-segregation behavior of Ca during the sintering process of MnZn Ferrite, J. Jpn Soc Powder Powder Metallurgy. 56(3)(2009) 111-115.

DOI: 10.2497/jjspm.56.111

Google Scholar

[9] B.S. Boyanov, Solid state interactions in the systems CaO(CaCO3)-Fe2O3 and CuFe2O4-CaO, J. Mining and Metallurgy. 41B(2005) 67-77.

DOI: 10.2298/jmmb0501067b

Google Scholar

[10] Y. Bando, T. Kato, Y. Ikeda, T. Takada, Phase equilibria in the system Calcium Oxide-Manganese Zinc Ferrite, Bull. Institute for Chemical Research. 46(6) (1968) 289-294.

Google Scholar