[1]
D. Broek, Elementary Engineering fracture mechanics, Martinus Nijhoff Publishers, (1987).
Google Scholar
[2]
G.P. Carman, R.C. Averill, K.L. Reifsnider, and J.N. Reddy, Optimization of fiber coatings to minimize stress concentrations in composite materials, J. Comp. Mater, 27(1993), pp.589-611.
DOI: 10.1177/002199839302700603
Google Scholar
[3]
T.J. Copponnex, M. Desaeger, I. Verpoest, Determination of the interfacial fracture toughness of composites by the use of the fragmentation test., Proc. of ECCM-7, Woodhead Publishing, London, UK, Vol. 2, (1996) pp.23-28.
Google Scholar
[4]
J.H. Giovanola, S.W. Kirkpatrick, Using the local approach to investigate scaling effects in ductile fracture, Int. J. of Fracture, Vol. 92, No. 2 (1998) pp.101-107.
Google Scholar
[5]
B.S. Holmes, S.W. Kirkpatrick, J.W. Simons, J.H. Giovanola, L. Seaman, Modeling the process of failure in structures, Structural Crashworthiness and Failure, Elsevier Publishing Co. (1993).
Google Scholar
[6]
E. Jacobs, I. Verpoest., Finite element modeling of the stresses near a broken coated fibre in a unidirectional composite, Proc. of ECCM-7, Woodhead Publishing, London, UK, Vol. 1 (1996).
Google Scholar
[14]
[12] [10] [8] [6] [4] [2] G = 121 J/m2 G = 22 J/m2 r1/2 COD (microns) r (microns)x102 Fig. 3 Plots of crack opening displacement profiles as a function of r at different of GI and GIB which showing increase in displacements with addition of small load. Fig. 4 Plots of crack opening displacement profiles as a function of r at different of GIB which showing decrease in displacements with addition of small load. Fig. 5 Failure map of coated material. Normalised critical load P* = P/R2 dependent on ratio of layer thickness h to indenter radius R (h* = h/R) for a substrate yield strength of 1. 5 GPa and a film fracture strength of 15 GPa.
Google Scholar
[7]
[6] [5] [4] [3] [2] [1] GI = 35 J/m2 COD (microns) r (microns)x102 GIB = 62 J/m2 GI = 22 J/m2 GIB = 58 J/m2.
Google Scholar
[4]
[3] [2] [1] [2] [1] GIB = 33 J/m2 COD (microns) r (microns)x102 GIIB = 155 J/m2 GIB = 33 J/m2.
Google Scholar
1000. 0 100. 0 10. 0 1. 0 0. 1 Normalized critical load, P*x106 in N/m2 Normalized layer thickness, h* 0. 1 1. 0 10. 0 100. 0 1000. 0 elestic region plastic deformation of substrate coating failure.
Google Scholar