Role of Chip Serration Frequency in Chatter Formation during End Milling Operation of Stainless Steel

Mohammed Anayet Ullah  Patwari; A.K.M. Nurul Amin; Waleed Fekry  Faris

doi:10.4028/www.scientific.net/AMR.97-101.1989

Paper Titles

Design of an Ultrasonic Vibration Deep-Hole Honing Device
p.1971

Experiment and Theory of Cutting Forces for Cemented Carbides Based Self-Lubricated Tool Embedded with Solid Lubricants
p.1975

Study on the Cutting Mechanism of Remanufacture Deposited Materials in the Impactive Condition
p.1981

Research on Tool-Chip Friction during Ti6Al4V Milling Process with Different Cooling/Lubrication Methods
p.1985

Role of Chip Serration Frequency in Chatter Formation during End Milling Operation of Stainless Steel
p.1989

Prediction of Flank Milling Forces in Ruled Surface Impeller Machining
p.1993

Nonequivalent Milling of Roller Gear Cams Based on Approximation Method of Offset Surface
p.1998

Study on Precision Grinding of Involute Cams on a Double-Disc Device
p.2002

Trajectory Interpolation in CNC Grinding of Indexable Inserts
p.2007

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 97-101Role of Chip Serration Frequency in Chatter...

Role of Chip Serration Frequency in Chatter Formation during End Milling Operation of Stainless Steel

Abstract:

Experimental investigations have been conducted on the chips and common types of discreteness in the form of serrated saw teeth (primary or secondary) have been identified. It has been observed that the chip formation process has a discrete nature, associated with the periodic shearing process of the chip during machining of stainless steel. Mechanism of formation of these teeth has been studied and the frequency of their formation has been determined. The different modes of the vibrating components of the vertical machining centre have been extracted by modal analysis and the vibration responses during cutting conditions have also been recorded using an online monitoring data acquisition system. It has been concluded from the findings that chatter is the outcome of resonance, which occurs in the system when the frequency of secondary or primary serrated teeth formation is approximately equal to or an integer multiple of the ‘prominent mode frequencies’ of the system components.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 97-101)

Pages:

1989-1992

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.97-101.1989

Citation:

Cite this paper

Online since:

March 2010

Authors:

Mohammed Anayet Ullah Patwari, A.K.M. Nurul Amin, Waleed Fekry Faris

Keywords:

Chatter Formation, Chip Serration Frequency, End Milling, Prominent Mode Frequency

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] Taylor, F.W. 1907. On the Art of Cutting Metals,. Trans. Amer. Soc. Mech. Eng. 28-30.

Google Scholar

[2] Eliasberg, M.E. Fundamentals of the theory of chatter during metal cutting process, Journal of Machine-Tool. (1): 3-4, (1962).

Google Scholar

[3] Loladze, T.H. Chip Formation During Metal Cutting Process, Moscow: Publication of Machine Building, (1980).

Google Scholar

[4] Shteinberg, I.C. Removal of Chatter Appearing During the Metal Cutting Process on Lathe Machine (in Russian), Moscow: Publication of Machine Building, (1976).

Google Scholar

[5] Kudinov, V.A., Dynamics of Machine Tools Moscow (in Russian),: Publication of Machine Building, (1965).

Google Scholar

[6] Tobias, S.A. 1965, Machine Tool Vibration, New York: John Wiley & Sons Inc.

Google Scholar

[7] Anayet U Patwari, AKM Nurul Amin, Waled F Faris, M. H Ishtiyaq Investigation of formation of chatter in a non-wavy surface during thread cutting and turning operations, Proceedings of the International conference of Advances in Materials and Processing Technologies(AMPT), 02-05 November 2008, Manama, Bahrain.

DOI: 10.4028/www.scientific.net/amr.83-86.637

Google Scholar

[8] Amin, A.K.M.N., Investigation of the Laws Governing the Formation of Chatter during Metal Cutting Processes and the Influence of Chatter on Tool Wear (in Russian), Ph.D. thesis, Georgian Polytechnic Institute, Georgia, 1982, p.261.

Google Scholar

[9] Anayet U. Patwari, AKM Nurul Amin, Waleed F Faris, Loksk, Finite Element and Experimental Analysis of Dynamic Behavior of Vertical Machining Centre Components by Modal Analysis, Proceedings of International Conference of Advance materials for application in acoustics and vibration, (04-06 January 2009), Cairo, Egypt. (b).

DOI: 10.1155/2009/508076

Google Scholar