Effect of Electrolyte Concentration on the Growth of Porous Anodic Aluminium Oxide (AAO) on Al-Mn Alloys

C.H. Voon; Mohd Nazree B. Derman

doi:10.4028/www.scientific.net/AMR.626.610

Paper Titles

Development of Lubricants Evaluation for Different Friction Laws by Using Rigid-Plastic Finite Element Method
p.584

Energy Absorption Characteristics of Interface Modified GFRP Laminates under Low Velocity Impact
p.589

Effects of Various Additives on Drying Shrinkage, Compressive and Flexural Strength of Lightweight Foamed Concrete (LFC)
p.594

Effects of Cavity Length on Optical Characteristics of Deep Violet InGaN DQW Lasers
p.605

Effect of Electrolyte Concentration on the Growth of Porous Anodic Aluminium Oxide (AAO) on Al-Mn Alloys
p.610

A Study on the Rheological Properties of Low-Density Polyethylene/Palm Kernel Shell Composites
p.615

Effect of Post-Heated Concrete Cylinders Repaired with CFRP Reinforcement
p.620

Study on Performance and Characteristic of Microorganisms in a Waste-to-Energy System
p.625

In Vitro Biodegradability of Poly(lactic Acid)/Hydroxyapatite Biocomposites Prepared by Solvent-Blending Technique
p.631

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 626Effect of Electrolyte Concentration on the Growth...

Effect of Electrolyte Concentration on the Growth of Porous Anodic Aluminium Oxide (AAO) on Al-Mn Alloys

Abstract:

In this study, the effect concentration of electrolyte on pore nucleation process during anodizing was investigated. It was found that the concentration of oxalic acid influenced the morphologies and regularities of porous AAO formed on aluminum-manganese substrate. When the concentration of oxalic acid is 0.1 M, the porous AAO exhibited a disordered pores arrangement and no long range order was observed. However, when the concentration was increased to 0.3 M and 0.5 M, hexagonal pores arrangement and long range order were obtained. Although the hexagonal pore arrangement was still retained, further increasing the concentration of oxalic acid to 0.7 M render the long range order disappeared. The rate of increase of oxide mass of porous AAO increased with the concentration of oxalic acid.

You might also be interested in these eBooks

Advanced Materials Engineering and Technology

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 626)

Pages:

610-614

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.626.610

Citation:

Cite this paper

Online since:

December 2012

Authors:

C.H. Voon, Mohd Nazree B. Derman

Keywords:

Anodizing, Concentration, Manganese, Oxalic Acid, Porous Anodic Aluminium Oxide

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] F. Keller, M.S. Hunter, and D.L. Robinson, J. Electrochem. Soc. 100, 411 (1953).

Google Scholar

[2] L. Chuen-Chang and Y. Ching-Long, J. Electrochem. Soc. 157, (2009).

Google Scholar

[3] Y.C. Sui, J.A. Gonzalez-Leon, A. Bermudez, and J.M. Saniger, Carbon 39, 1709 (2001).

Google Scholar

[4] S.H. Jeong, H.Y. Hwang, S.K. Hwang, and K.H. Lee, Carbon 42, 2073 (2004).

Google Scholar

[5] Z. Chen, Y. Lei, H.G. Chew, L.W. Teo, W.K. Choi, and W.K. Chim, J. Cryst. Growth 268, 560 (2004).

Google Scholar

[6] L. Li, S. Pan, X. Dou, Y. Zhu, X. Huang, Y. Yang, G. Li, and L. Zhang, J. Phys. Chem. C 111, 7288 (2007).

Google Scholar

[7] A. Belwalkar, E. Grasing, W. Van Geertruyden, Z. Huang, and W.Z. Misiolek, J. Membr. Sci. 319, 192 (2008).

Google Scholar

[8] S. Ono and N. Masuko, Surf. Coat. Technol. 169-170, 139 (2003).

Google Scholar

[9] X. Qu, J. Dai, J. Tian, X. Huang, Z. Liu, Z. Shen, and P. Wang, J. Alloys Compd. 469, 332 (2009).

Google Scholar

[10] Y. Zhao, M. Chen, X. Liu, T. Xu, and W. Liu, Mater. Chem. Phys. 91, 518 (2005).

Google Scholar

[11] A.C. Crossland, G.E. Thompson, C.J.E. Smith, H. Habazaki, K. Shimizu, and P. Skeldon, Corros. Sci. 41, 2053 (1999).

Google Scholar

[12] O. Jessensky, F. Muller, and U. Gosele, J. Electrochem. Soc. 145, (1998).

Google Scholar

[13] K. Nielsch, J. Choi, K. Schwirn, R.B. Wehrspohn, and U. Gösele, Nano Lett. 2, (2002).

Google Scholar

[14] J.C. Scully, Treatise on materials science and technology, Academic Press Inc, Indianapolis, IN, USA, (1982).

Google Scholar