Experimental Study of Rheological Characteristics of Polymer Melts in the Micro-Die

Article Preview

Abstract:

Compared with in the conventional scales, the rheological properties of polymer melts have changed in the micro-scales. Based on the principle of capillary flow and modified with the method of Bagley or zero die micro-die, the rheological characteristics of polypropylene (PP) were investigated using the HAAKE capillary rheometer under the micro-die and conventional die. The results show that: the viscosity of polymer melt modified with the method of bagley or zero die micro-die in the different L/D ratio of micro-die is the same and the shear viscosity of PP decreases with the increase of shear rate; Compared with the viscosity in the conventional scales, the measured viscosity of PP in the micro-scales was reduced by 46% in 0.25mm diameter die, 44% in the 0.20mm diameter die and 88% in the 0.15mm diameter die at the same shear rate; a layer of fixed polymer melt was found in the inwall of the micro-die through the calculation of wall slip rate.

You might also be interested in these eBooks

Info:

Periodical:

Advanced Materials Research (Volumes 550-553)

Pages:

716-723

Citation:

Online since:

July 2012

Export:

Price:

* - Corresponding Author

[1] J. Giboz, T. Copponnex and P. Mele: J. Micromech. Microeng vol. 8(2007), p.96

Google Scholar

[2] W. Michaeli, A. Spennemann and R. Gartner: Microsys. Tech, vol.8(2002), p.55

Google Scholar

[3] M. Knights: Plast. Tech, vol.47(2001), p.54

Google Scholar

[4] W. Heckele and W. K. Schomburg: J. Micromech. Microeng, vol. 14(2004), p.R1

Google Scholar

[5] M. Usama, S. M. Attia, R. A. Jeffrey: Microfluid Nanofluid, vol. 7 (2009), P. 1

Google Scholar

[6] A. K. Angelov, J. P. Coulter: ANTEC, vol.1(2004), p.748

Google Scholar

[7] U. Eckart, P. Sascha, D. Ulrich: J. of Materials Processing Tech., vol. 167(2005), p.488

Google Scholar

[8] S. C. Chen, R. I. Tsai, R. D. Chien and T. K. Lin: International Communications in Heat and Mass Transfer, vol.32 (2005), p.501

Google Scholar

[9] C. Chen, S. Chen, W. Liaw and R. Chien: European Polymer J., vol. 44(2008), p.1891

Google Scholar

[10] J. Zhuang: vol.(2007) Doctor: Dalian University of Technology

Google Scholar

[11] B. Xu,: vol.(2010) Doctor: Dalian University of Technology

Google Scholar

[12] M. J. Wang, X. W. Sun and Y, Liu: J. of dalian University Technology, (2010)p.52

Google Scholar