Assessing Heat-Treatment Effects on Bovine Cortical Bones by Nanoindentation

Article Preview

Abstract:

Among different sterilization methods, heat-treatment of bone is recognized as one of the simple and practical methods to lower the human immunodeficiency virus (HIV) infection and overcome the risks of rejection and disease transfer from allograft and xenograft during bone transplantation. In order to best characterize the micro-structural mechanical property of bone after heat treatment, the nanoindentation technique was applied in this study to measure the localized elastic modulus and hardness for interstitial lamellae and osteons lamellae of bovine cortical bones at temperature 23°C (room temperature-pristine specimen), 37°C, 90°C, 120°C and 160°C, respectively. The elastic modulus (E) and hardness (H) of interstitial lamellae obtained higher values as compared with osteons lamellae which show that interstitial lamellae are more stiff and mineralized than osteons. Moreover, as a specimen pre-heat treated at 90°C, the E and H values of interstitial lamellae and osteons were closed to a pristine specimen. For a specimen pre-heat treated at 120°C, both interstitial lamellae and osteons obtained an increase in E and H values. As a specimen pre-heat treated at 160°C, the interstitial lamellae and osteons obtained a slight decrease in E and H values. These findings are correlated to results reported by other researchers [1, 2] that calcified collagen molecules starts to degenerate at about 120°C and complete at 160°C. Interestingly, when a specimen was pre-heat treated at 37°C, both interstitial lamellae and osteons obtained significant decreases in E values of 57% and 40%, respectively as compared to the pristine specimen; while in H values, there was a decrease of 27.4% and 15%, respectively. Thus, this paper will investigate the mechanical properties of bovine cortical bones under various temperature ranges by nanoindentation technique.

You might also be interested in these eBooks

Info:

Periodical:

Pages:

110-113

Citation:

Online since:

November 2011

Export:

Price:

[1] Wang X., Bank R.A., TeKoppele J.M., Agrawal C.M. The role of collagen in determining bone mechanical properties. Journal of Orthopaedic Research. 2001; 19: 1021-1016.

DOI: 10.1016/s0736-0266(01)00047-x

Google Scholar

[2] Wang X., Bank R.A., Teloppele J.M., Athansiou K.A., Agrawal C.M. Effect of Collagen Denaturation on Bone Biomechanical Integrity. 45th Annual Meeting, Orthopaedic Research Society. 1999; 782.

Google Scholar

[3] Todoh M., Tadano S., Imari Y. Effect of Heat Denaturation of Collagen Matrix on Bone Strength. ICBME 2008, Peoceedings 23. 2008; 23: 2034-(2037).

DOI: 10.1007/978-3-540-92841-6_507

Google Scholar

[4] Catanese III J., Featherstone J.D., Keaveny T.M. Characterization of the mechanical and ultrastructural properties of heat-treated cortical bone for use as a bone substitute. J. Biomed. Mater. Res. 1999; 45: 327-336.

DOI: 10.1002/(sici)1097-4636(19990615)45:4<327::aid-jbm7>3.0.co;2-l

Google Scholar

[5] Ebenstein D.M., Pruitt L.A. Nanoindentation of biological materials. Nanotoday. 2006; Vol. 1, No. 3: 26-33.

Google Scholar

[6] Rho J.Y., Pharr G.M. Effects of drying on the mechanical properties of bovine femur measured by nanoindentation. Journal of Materials Science: Materials in Medicine. 1999; 10: 485-488.

Google Scholar

[7] Hoc T., Henry L., Verdier M., Aubry D., Sedel L., Meunier A. Effect of microstructure on the mechanical properties of Haversian cortical bone. Bone. 2006; 38: 466-474.

DOI: 10.1016/j.bone.2005.09.017

Google Scholar

[8] Rho J.Y., Tsui T.Y., Pharr G.M. Elastic properties of human cortical and trabecular lamellar bone measured by nanoindentation. Biomaterials. 1997; 18: 1325-1330.

DOI: 10.1016/s0142-9612(97)00073-2

Google Scholar

[9] Wang X. J., Chen X. B., Hodgson P. D., Wen C. E. Elastic modulus and hardness of cortical and trabecular bovine bone measured by nanoindentation. Trans. Nonferrous Met. SOC. China. 2006; 16: s744-s748.

DOI: 10.1016/s1003-6326(06)60293-8

Google Scholar

[10] Rho J.Y., Roy II M.E., Tsui T.Y., Pharr G.M. Elastic properties of microstructural components.

Google Scholar

[11] Oliver W.C., Pharr G.M. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J. Mater. Res. 1992; 7: 1564-1583.

DOI: 10.1557/jmr.1992.1564

Google Scholar

[12] Rho J.Y., Zioupos P., Currey J.D., PharrG.M. Variations in the individual thick lamellar properties within osteons by nanoindentation. Bone. 1999; vol. 25, No. 3: 295-300.

DOI: 10.1016/s8756-3282(99)00163-5

Google Scholar

[13] Leikina E. Mertts M.V. Kuznetsova N., Leikin S. Type I collagen is thermally unstable at body temperature. PNAS. 2002; Vol. 99: 1314-1318.

DOI: 10.1073/pnas.032307099

Google Scholar