Quality Technological Properties of Foundry Exhaust Dust as Alternative Ceramic Coating Raw Materials

Luiz Oliveira Veriano dalla Valentina; Marilena Valadares Folgueras; Wanessa Rejane Knop; Maria Cristina Pacheco do Nascimento; Glaucia Aparecida Prates

doi:10.4028/www.scientific.net/AMR.1088.395

Paper Titles

Ce-Doped ZnO Based Fast Response UV Photoconductive Detector
p.377

Surfactant-Based Fluorescent Quantum Carbon Dots: Synthesis and Application
p.381

The Interactions with Proton-Donor Solvents and Stability of some Borondipyrrinates
p.386

Receiving and Research of Diamond-Like PVD-Coating
p.391

Quality Technological Properties of Foundry Exhaust Dust as Alternative Ceramic Coating Raw Materials
p.395

Investigation of the Elastic Modulus Effect on Free Vibration Characteristics of Fiber Reinforced Polymer Composite Beams Made of Various Fundamental Shapes
p.401

Evaluation of a Plastic Composite Produced with Residues of Sugarcane Bagasse and Polypropylene without Additives
p.407

Influence of Portland Cement Addition in the Physical and Mechanical Properties of Epoxy Resin
p.411

Resin-Wood Particulate Composite Reinforced with Piassava Fibre
p.415

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 1088Quality Technological Properties of Foundry...

Quality Technological Properties of Foundry Exhaust Dust as Alternative Ceramic Coating Raw Materials

Abstract:

The work evaluates the possibility of the use the exhauster powder generated in the foundry process in ceramic mass atomized semigre type. The raw materials used were semi-stoneware kind atomized powder used on the coating ceramic manufacturing and dust exhaust byproduct supplied by a foundry industry both from brazilian industries . Tests were conducted using a heating rate of 10o.C / min and oxidant and / or inert atmosphere. Specimens contained different amounts of byproduct to the extent of 30% by mass, in order to verify the maximum addition of byproduct and were used in order to analyze the technological properties evaluation (water absorption linear shrinkage, bulk density). at the temperature of 1100 ° C showed higher difference between the results obtained and 1200o C this difference decreased.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 1088)

Pages:

395-398

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.1088.395

Citation:

Cite this paper

Online since:

February 2015

Authors:

Luiz Oliveira Veriano dalla Valentina, Marilena Valadares Folgueras, Wanessa Rejane Knop, Maria Cristina Pacheco do Nascimento, Glaucia Aparecida Prates*

Keywords:

Ceramic Material, Foundry, Powder Exhauster, Quality, Technological Properties

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] Singh, G .; Siddique, R., Effect of waste foundry sand (WFS) the partial re-placement of sand on the strength, ultrasonic pulse velocity and permeability of concrete. Construction and Building Materials, 26, (2012), pp.416-422.

DOI: 10.1016/j.conbuildmat.2011.06.041

Google Scholar

[2] Siddique, R .; Singh, G. (2011), Utilization of waste foundry sand (WFS) in concrete manufacturing, Resources, Conservation and Recycling, 55, (2011) pp.885-892.

DOI: 10.1016/j.resconrec.2011.05.001

Google Scholar

[3] Knop, W. R. . Estudo da Viabilização da Incorporação do Pó de Exaustão em Massa Cerâmica. Dissertação de mestrado. Programa de Pós graduação em Ciência e Engenharia de Materiais, Universidade Estadual de Santa Catarina-UDESC, Joinville, Brazil. (2009).

DOI: 10.18226/610001/mostraxvi.2016.45

Google Scholar