Hybrid Solar-Wind Stand-Alone Energy System: A Case Study

Georgiana Corsiuc; Carmen Mârza; Emilian Ceuca; Raluca Andreea Felseghi; Teodora Şoimoşan

doi:10.4028/www.scientific.net/AMM.772.536

Paper Titles

Analyses about Trackability of Hand-Eye-Vergence Visual Servoing in Lateral Direction
p.512

Performance of Hydrogen Technology for Power Supply of Passive House
p.521

Experimental Research on Magnetic Treatment of Fuel Fluids before Burner for Increasing Thermal Efficiency and Reducing Emissions Resulting from the Burning Process
p.526

Influence of the Operating Regime on the Performances of Thermal Solar Systems Integrated in Heating Networks
p.531

Hybrid Solar-Wind Stand-Alone Energy System: A Case Study
p.536

Data Acquisition and Processing Method Adequate for High Speed Transient Electrical Events
p.541

Aerial Infrared Thermography: A Scalable Procedure for Photovoltaics Inspections Based on Efficiency and Flexibility
p.546

Numerical Study on Impeller Performance of Mini Hydro Turbine
p.552

Design of a Gorlov Turbine for Marine Current Energy Extraction
p.556

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vol. 772Hybrid Solar-Wind Stand-Alone Energy System: A...

Hybrid Solar-Wind Stand-Alone Energy System: A Case Study

Abstract:

In this paper is analyzed a stand-alone solar-wind hybrid system with energy storage in batteries installed on a farm in Romania. Because, after following the system operation, was discovered that the energy demand is not fully covered, two solutions were proposed. The optimization of the system was performed using iHoga, which is a simulation and optimization software based on genetic algorithms. A series of simulations have been conducted, with different configurations of the system, finally obtaining two optimal solutions for the hybrid system. The first solution proposes to increase the number of photovoltaic panels by 10 panels of the same type - System A, and the second solution proposes the installation of a generator - System B. Analyzing the two solutions was noted that in case of the System A, even if the initial investment is higher and produces a lot of excess energy, the total cost over the lifetime of the system is lower then in case of System B. Also, by comparing the two solutions, can be observed a high increase of carbon dioxide emissions in case of System B.

You might also be interested in these eBooks

Advanced Research in Aerospace, Robotics, Manufacturing Systems, Mechanical Engineering and Bioengineering

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volume 772)

Pages:

536-540

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.772.536

Citation:

Cite this paper

Online since:

July 2015

Authors:

Georgiana Corsiuc, Carmen Mârza, Emilian Ceuca, Raluca Andreea Felseghi, Teodora Şoimoşan

Keywords:

Hybrid System, Renewable Energy, Solar Energy, Stand-Alone System, Wind Energy

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] G. Corsiuc, et al: Analysis of using stand-alone solar-wind power system in rural areas, Bulletin of the Transilvania University of Brasov, Volume 7 (56), (2014), pp.31-38.

Google Scholar

[2] R.A. Felseghi, et al: Estimation of hydrogen and electrical energy production by using solar and wind resources for a residential building from Romania, Monitoring, Controlling and Architecture of Cyber Physical Systems, ICMERA 5th ed., Romania (2014).

DOI: 10.4028/www.scientific.net/amm.656.542

Google Scholar

[3] Information on https: /eosweb. larc. nasa. gov.

Google Scholar

[4] R. Dufo - López, J.L. Bernal - Agustín, iHOGA Software Version 2. 2, Electrical Engineering Department, University of Zaragoza, Spain (2012).

Google Scholar

[5] J.L. Bernal-Agustín, R. Dufo-López: Simulation and optimization of stand-alone hybrid renewable energy systems, J. Renewable and Sustainable Energy Reviews, 13 (2009), p.2111.

DOI: 10.1016/j.rser.2009.01.010

Google Scholar

[6] E. Ceuca, A. Tulbure: Integrated monitoring system for tracking green energy production, IEEE 17th Int. Symposium for Design and Technology in Electronic Packaging, Romania (2011).

DOI: 10.1109/siitme.2011.6102706

Google Scholar