Design Optimization and Modal Analysis of 3-D Lattice Plate

Katarina Tvrdá; Martin Stiglic

doi:10.4028/www.scientific.net/AMM.769.77

Paper Titles

Comparison of Analytical and FEM Solutions of the Contact Tasks of Foundation - Subsoil Interaction
p.55

Bended Pile and the Layered Subsoil
p.61

Effect of Non-Uniform Temperature Distribution over the Cross-Section in Steel Frame Structure
p.65

Static Analysis of Load-Bearing Structure of a Transparent Roof
p.69

Design Optimization and Modal Analysis of 3-D Lattice Plate
p.77

Foundation Plate Optimization
p.81

Effect of a Nonlinear Term in a Strain-Displacement Relationship on the Load-Displacement Path of Von Mises Truss
p.85

Application of Fuzzy Set Theory to the Serviceability Limit State of a Steel Beam under Bending
p.91

Analysis of Reinforced Concrete Slab Structures
p.97

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vol. 769Design Optimization and Modal Analysis of 3-D...

Design Optimization and Modal Analysis of 3-D Lattice Plate

Abstract:

This paper deals with the design optimization, static, modal and probability analyses of a simplified space truss, which was used to cover a festival square. Design optimization was used to achieve the best parameters for steel tubes of 3-D lattice plate. The results from two optimization methods were compared and finally modal analysis was performed with best parameters giving the own shapes and own frequencies. For the deterministic analysis the Monte Carlo simulation was used. Finally some results are presented.

You might also be interested in these eBooks

Trends in Statics and Dynamics of Constructions

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volume 769)

Pages:

77-80

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.769.77

Citation:

Cite this paper

Online since:

June 2015

Authors:

Katarina Tvrdá*, Martin Stiglic

Keywords:

ANSYS, Design, Method, Modal Analysis, Optimization

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] G. N. Vanderplaats, Multidiscipline Design Optimization. Colorado Springs, CO, (2014).

Google Scholar

[2] J. Chilton, Space Grid Structures. Oxford: Architectural Press, 191 p, (2000).

Google Scholar

[3] K. Frydrysek, Probabilistic calculations in mechanics 1, VSB-TU Ostrava, 2010. (in Czech).

Google Scholar

[4] S. Kmet, M. Tomko, J. Brda, Time-dependent analysis of cable trusses Part II. Simulation-based reliability assessment. Structural Engineering and Mechanics, 2011, vol. 38, iss. 2, pp.171-193.

DOI: 10.12989/sem.2011.38.2.171

Google Scholar

[5] E. Kormanikova, K. Kotrasova, Resonant frequencies and mode shapes of rectangular sandwich plate, in: Modelling in Mechanics 2010: Ostrava, 2010, pp.1-7.

Google Scholar